journal article·2015-01Open access

An Investigation into the Effect of a Post-electroplating Electrochemical Oxidation Treatment on Tin Whisker Formation

M. A. Ashworth, D. Haspel, L. Wu, G. D. Wilcox, R. J. Mortimer

Journal of Electronic Materials· Volume 44· Issue 1

Abstract

Since the ‘cracked oxide theory’ was proposed by Tu in 1994,1 there has only been a limited number of studies that have sought to investigate the effect of the Sn oxide on whisker growth. The current study has used electrochemical oxidation to produce oxide films, which has enabled the effect of the surface oxide thickness on whisker growth to be established. The effect of oxide thickness on whisker growth has been investigated for tin electrodeposits on both Cu and brass substrates. The influence of applied oxidation potential on the thickness of the Sn oxide film has been investigated using x-ray photoelectron spectroscopy (XPS) for potassium bicarbonate–carbonate and borate buffer electrolyte solutions. Whisker growth from electrochemically oxidised Sn-Cu deposits on Cu and Sn deposits on brass has been investigated and compared with samples left to develop a native air-formed oxide. XPS studies show that the thickness of the electrochemically formed Sn oxide film is dependent on the applied oxidation potential and the total charge passed. Subsequent whisker growth studies demonstrate that electrochemically oxidised Sn-Cu deposits on Cu and Sn deposits on brass are significantly less susceptible to whisker growth than those having a native oxide film. For Sn deposits on brass, the electrochemically formed Sn oxide greatly reduces Zn oxide formation at the surface of the tin deposit, which results in whisker mitigation. For Sn-Cu deposits on Cu, the reduction in whisker growth must simply derive from the increased thickness of the Sn oxide, i.e. the Sn oxide film has an important role in stemming the development of whiskers.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloy Microstructure Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. K.N. Tu, Phys. Rev. B 49, 2030 (1994).10.1103/PhysRevB.49.2030 ↗
2. K.N. Tu and K. Zeng, Proceedings of IEEE Electronic Components and Technology Conference (Piscatawny, NJ, 2002), pp. 1194–1200.
3. K. Tu, C. Chen, and A.T. Wu, J. Mater. Sci. 18, 269 (2007).
4. K.S. Kumar, L. Reinbold, A.F. Bower, and E. Chason, J.␣Mater. Res. 23, 2916 (2008).10.1557/JMR.2008.0351 ↗
5. J.K. Shin and E. Chason, J. Mater. Res. 24, 1522 (2009).10.1557/jmr.2009.0172 ↗
6. E. Chason, N. Jadhav, W.L. Chan, L. Reinbold, and K.S. Kumar, Appl. Phys. Lett. 92, 171901 (2008).10.1063/1.2912528 ↗
7. B.Z. Lee and D.N. Lee, Acta Mater. 46, 3701 (1998).10.1016/S1359-6454(98)00045-7 ↗
8. C.Y. Chang and R.W. Vook, Thin Solid Films 228, 205 (1993).10.1016/0040-6090(93)90599-K ↗
9. K.W. Moon, C.E. Johnson, M.E. Williams, O. Kongstein, G.R. Stafford, C.A. Handwerker, and W.J. Boettinger, J.␣Electron. Mater. 34, L31 (2005).10.1007/s11664-005-0274-3 ↗
10. N. Jadhav, E. Buchovecky, E. Chason, and A. Bower, JOM 62, 30 (2010).10.1007/s11837-010-0105-8 ↗
11. B. Jiang and A.P. Xian, Philos. Mag. Lett. 86, 521 (2006).10.1080/09500830600908996 ↗
12. K. Suganuma, A. Baated, K.-S. Kim, K. Hamasaki, N.␣Nemoto, T. Nakagawa, and T. Yamada, Acta Mater. 59, 7255 (2011).10.1016/j.actamat.2011.08.017 ↗
13. K.N. Tu, Acta Metall. 21, 347 (1973).10.1016/0001-6160(73)90190-9 ↗
14. R. Díaz, I. Díez-pérez, P. Gorostiza, F. Sanz, and J.R. Morante, J. Braz. Chem. Soc. 14, 523 (2003).10.1590/S0103-50532003000400006 ↗
15. S.D. Kapusta and N. Hackerman, Electrochim. Acta 25, 1625 (1980).10.1016/0013-4686(80)80016-8 ↗
16. P.E. Alvarez, S.B. Ribotta, M.E. Folquer, C.A. Gervasi, and J.R. Vilche, Corros. Sci. 44, 49 (2002).10.1016/S0010-938X(01)00032-4 ↗
17. M. Drogowska, H. Menard, and L. Brossard, J. Appl. Electrochem. 21, 84 (1991).10.1007/BF01103835 ↗
18. M.A. Ashworth, G.D. Wilcox, R.L. Higginson, R.J. Heath, and C. Liu, Trans. Inst. Met. Finish. 91, 260 (2013).10.1179/0020296713Z.000000000116 ↗
19. D. Morgan Tench, D.P. Anderson, and P. Kim, J. Appl. Electrochem. 24, 18 (1994).10.1007/BF00243325 ↗
20. G. Schon, J. Electron Spectros. Relat. Phenom. 2, 75 (1973).10.1016/0368-2048(73)80049-0 ↗
21. K.W. Moon, M.E. Williams, C.E. Johnson, G.R. Stafford, C.A. Handwerker, and W.J. Boettinger, Proceedings of PRICM4 Forth Pacific Rim International Conference on Advanced Materials and Processing (Honolulu, Hawaii, ed. S. Hanada, et al., 11–15 December 2001), pp. 1115–1118.
22. S.N. Shah and D. Eurof Davies, Electrochim. Acta 8, 663 (1963).10.1016/0013-4686(63)85012-4 ↗
23. NIST, X-ray Photoelectron Spectroscopy Database, NIST Stand. Ref. Database 20, Version 4.1, http://srdata.nist.gov/xps/ (n.d.).
24. W. Zhang and W. Ruythooren, European Microelectronics and Packaging Conference (EMPC 2009) (2009), vol. 1 2, pp. 597–600.
25. S.C. Britton and M. Clarke, Trans. Inst. Met. Finish. 40, 205 (1964).10.1080/00202967.1963.11869869 ↗
26. B.D. Dunn, European Space Agency Representative. STR-223, European Space Agency (Paris, 1987).
27. S. Sakuyama and M. Kutami, FUJITSU Sci. Technol. J. 41, 217 (2005).
28. W.J. Boettinger, C.E. Johnson, L.A. Bendersky, K.W. Moon, M.E. Williams, and G.R. Stafford, Acta Mater. 53, 5033 (2005).10.1016/j.actamat.2005.07.016 ↗
29. M.E. Williams, K.W. Moon, W.J. Boettinger, D. Josell, and A.D. Deal, J. Electron. Mater. 36, 214 (2007).10.1007/s11664-006-0071-7 ↗
30. M. Dittes, P. Oberndorff, and L. Petit, 53rd Electronic Components and Technology Conference 2003 Proceedings (2003), pp. 822–826.
31. J. Cheng, F. Yang, P.T. Vianco, B. Zhang, and J.C.M. Li, J. Electron. Mater. 40, 2069 (2011).10.1007/s11664-011-1708-8 ↗
32. E.R. Crandall, Factors Governing Tin Whisker Growth (Ph.D. thesis, Auburn University, 2012).10.1007/978-3-319-00470-9 ↗