journal article·2010-11

Recrystallization of Electrodeposited Copper Thin Films During Annealing

N. Alshwawreh, M. Militzer, D. Bizzotto

Journal of Electronic Materials· Volume 39· Issue 11
Publisher page

Abstract

The microstructure evolution of electrodeposited copper thin films was studied at room and elevated temperatures. The effects of isothermal and nonisothermal treatments were investigated. The heating rate in nonisothermal treatment was found to significantly control the recrystallization temperature and time. The Johnson–Mehl–Avrami–Kolmogorov model was applied to describe the fraction recrystallized under isothermal conditions. It was proven that the recrystallization of copper films during nonisothermal annealing can be modeled using the additivity rule. Based on the isothermal results, a model was applied to predict the recrystallization kinetics during nonisothermal heat treatments.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Copper Interconnects and Reliability · Electrodeposition and Electroless Coatings · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. J. Harper, C. Cabral, P. Andricacos, L. Gignac, I. Noyan, K. Rodbell, and C. Hu, J. Appl. Phys. 86, 2516 (1999).10.1063/1.371086 ↗
2. S. Lagrange, S. Brongersma, M. Judelewicz, A. Saerens, I. Vervoort, E. Richard, R. Palmans, and K. Maex, Microelectron. Eng. 50, 449 (2000).10.1016/S0167-9317(99)00314-7 ↗
3. S. Brongersma, E. Kerr, I. Vervoort, A. Saerens, and K. Maex, J. Mater. Res. 17, 582 (2002).10.1557/JMR.2002.0082 ↗
4. T. Hara, H. Toida, and Y. Shimura, Electrochem. Solid State Lett. 6, G98 (2003).10.1149/1.1576572 ↗
5. C. Detavernier, S. Rossnagel, C. Noyan, S. Guha, C. Cabral, and C. Lavoie, J. Appl. Phys. 94, 2874 (2003).10.1063/1.1596366 ↗
6. H. Lee, W. Nix, and S. Wong, J. Vac. Sci. Technol. B 22, 2369 (2004).10.1116/1.1788680 ↗
7. M. Stangl and M. Militzer, J. Appl. Phys. 103, 113521 (2008).10.1063/1.2937249 ↗
8. K. Kondo, T. Matsumoto, and K. Watanabe, J. Electrochem. Soc. 151, C250 (2004).10.1149/1.1649235 ↗
9. T. Ritzdorf, L. Chen, D. Fulton, and C. Dundas, Proceedings of the IEEE International Interconnect Technology Conference (San Francisco, 1999), p. 287.
10. M. Hasegawa, Y. Nonaka, Y. Negishi, Y. Okinaka, and T. Osaka, J. Electrochem. Soc. 153, C117 (2006).10.1149/1.2149299 ↗
11. A. Mayadas and M. Shatzkes, Phys. Rev. B 1, 1382 (1970).10.1103/PhysRevB.1.1382 ↗
12. J. Kelly, C. Tian, and A. West, J. Electrochem. Soc. 146, 2540 (1999).10.1149/1.1391968 ↗
13. W. Teh, L. Koh, S. Chen, J. Xie, C. Li, and P. Foo, Microelectron. Eng. 32, 579 (2001).10.1016/S0026-2692(01)00035-0 ↗
14. H. Kissinger, Anal. Chem. 29, 1702 (1957).10.1021/ac60131a045 ↗
15. D. Gupta, Mater. Res. Soc. Symp. Proc. 337, 209 (1994).10.1557/PROC-337-209 ↗
16. C. Cabral, P. Andricacos, L. Gignac, I. Noyan, K. Rodbell, T. Shaw, R. Rosenberg, J. Harper, P. DeHaven, P. Locke, S. Malhotra, C. Uzoh, and S. Klepeis, Proceeding of the Advanced Metallization Conference XIV (Colorado Springs, 1999), p. 81.
17. C. Lingk and M. Gross, J. Appl. Phys. 84, 5547 (1998).10.1063/1.368856 ↗
18. J. Cahn, Acta Metall. 4, 572 (1956).10.1016/0001-6160(56)90158-4 ↗
19. S. Donthu, M. Vora, S. Lahiri, C. Thompson, and S. Yi, J. Electron. Mater. 32, 531 (2003).10.1007/s11664-003-0138-7 ↗
20. M. Ferry, D. Muljono, and D. Dunne, ISIJ Int. 41, 1053 (2001).10.2355/isijinternational.41.1053 ↗
21. V. Carreau, S. Maitrejean, M. Verdier, Y. Brechet, A. Roule, A. Toffoli, V. Delaye, and G. Passemard, Microelectron. Eng. 84, 2723 (2007).10.1016/j.mee.2007.05.016 ↗