Use of a Soluble Anode in Electrodeposition of Thick Bismuth Telluride Layers
Source abstract
Abstract
Integration of thermoelectric devices within an automotive heat exchanger could enable conversion of lost heat into electrical energy, contributing to improved total output from the engine. For this purpose, synthesis of thick bismuth telluride (Bi2Te3) films is required. Bismuth telluride has been produced by an electrochemical method in nitric acid with a sacrificial bismuth telluride anode as the source of cations. The binary layer grows on the working electrode while the counter-electrode, a Bi2Te3 disk obtained by high frequency melting, is oxidized to BiIII and TeIV. This process leads to auto-regeneration of the solution without modification of its composition. The thickness of films deposited by use of the Bi2Te3 anode was approximately 10 times that without. To demonstrate the utility of a soluble anode in electrochemical deposition, we report characterization of the composition and morphology of the films obtained under different experimental conditions. Perfectly dense and regular Bi2Te3 films (∼400 μm) with low internal stress and uniform composition across the cross-section were prepared. Their thermoelectric properties were assessed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. F. Xiao, C. Hangarter, B. Yoo, Y. Rheem, K.H. Lee, and N.V. Myung, Electrochim. Acta 53, 8103 (2008).10.1016/j.electacta.2008.06.015 ↗
2. C. Boulanger, J. Electron. Mater. 39, 1818 (2010).10.1007/s11664-010-1079-6 ↗
3. A. Zimmer, N. Stein, H. Terryn, and C. Boulanger, J. Phys. Chem. Solids 68, 1902 (2007).10.1016/j.jpcs.2007.05.021 ↗
4. S. Michel, S. Diliberto, C. Boulanger, N. Stein, and J.M. Lecuire, J. Cryst. Growth 277, 274 (2005).10.1016/j.jcrysgro.2004.12.164 ↗
5. S. Michel, S. Diliberto, N. Stein, B. Bolle, and C. Boulanger, J. Solid State Electrochem. 12, 95 (2008).10.1007/s10008-007-0362-9 ↗
6. M. Martin-Gonzalez, A.L. Prieto, R. Gronsky, T. Sands, and A.M. Stacy, J. Electrochem. Soc. 149, C546 (2002).10.1149/1.1509459 ↗
7. W. Glatz, L. Durrer, E. Schwyter, and C. Hierold, Electrochim. Acta 54, 755 (2008).10.1016/j.electacta.2008.06.065 ↗
8. S. Li, M.S. Toprak, H.M.A. Soliman, J. Zhou, M. Muhammed, D. Platzek, and E. Müller, Chem. Mater. 18, 3627 (2006).10.1021/cm060171o ↗
9. H.P. Nguyen, M. Wu, J. Su, R.J.M. Vullers, P.M. Vereecken, and J. Fransaer, Electrochim. Acta 68, 9 (2012).10.1016/j.electacta.2012.01.091 ↗
10. W.J. Li, Electrochim. Acta 54, 7167 (2009).10.1016/j.electacta.2009.07.008 ↗
11. Li FH and W. Wang, Electrochim. Acta 55, 5000 (2010).10.1016/j.electacta.2010.04.005 ↗
12. H.P. Nguyen, J. Su, Z. Wang, R.J.M. Vullers, P.M. Vereecken, and J. Fransaer, ECS Trans. 33, 75 (2011).10.1149/1.3551493 ↗
13. J. Zhou, S. Li, M.A. Soliman, M.S. Toprak, M. Muhammed, D. Platzek, and E. Müller, Phys. Status Solidi (c) 5, 3453 (2008).10.1002/pssc.200779436 ↗
14. F. Golgovici, A. Cojocaru, M. Nedelcu, and T. Visan, J.␣Electron. Mater. 38, 2079 (2010).10.1007/s11664-009-1006-x ↗
15. F. Golgovici, A. Cojocaru, L. Anicai, and T. Visan, Mater. Chem. Phys. 126, 700 (2011).10.1016/j.matchemphys.2010.12.058 ↗
16. H. Ebe, M. Ueda, and T. Ohtsuka, Electrochim. Acta 53, 100 (2007).10.1016/j.electacta.2007.03.017 ↗
17. W. Glatz, S. Muntwyler, and C. Hierold, Sens. Actuators A Phys. 132, 337 (2006).10.1016/j.sna.2006.04.024 ↗
18. M.Y. Kim, T.S. Oh, and J.S. Kim, J. Korean Phys. Soc. 50, 670 (2007).10.3938/jkps.50.670 ↗