journal article·2014-04

Synthesis and Surface Modification of LiCo1/3Ni1/3Mn1/3O2 for Lithium Battery Applications

Ganguli Babu, N. Kalaiselvi, D. Bhuvaneswari

Journal of Electronic Materials· Volume 43· Issue 4
Publisher page

Abstract

In an attempt to prepare phase-pure LiCo1/3Mn1/3Ni1/3O2 compound, the sol–gel method with precursors containing different ratios of lithium and transition-metal ions such as Li:M = 1:1, 1.05:1, 1.10:1, 1.15:1, 1.20:1, and 1.25:1 has been deployed. Properties such as phase purity, perfect layeredness, good cation ordering, and acceptable charge–discharge behavior were observed only when LiCo1/3Ni1/3Mn1/3O2 was prepared using a Li:M ratio of 1.15:1.0, leading to the recommendation of this as the optimum precursor ratio to prepare active LiCo1/3Ni1/3Mn1/3O2 cathodes for batteries. Further, with a view to suppress the capacity fade behavior of native LiCo1/3Mn1/3Ni1/3O2 cathodes observed in high-voltage (4.6 V) regions, selected HF-scavenging metal oxide (Al2O3) or metal hydroxide [Al(OH)3] was deployed as a surface modifier. Interestingly, LiCo1/3Ni1/3Mn1/3O2 cathode modified with Al(OH)3 exhibited significantly improved electrochemical properties such as lower charge-transfer resistance (42 Ω), higher specific capacity (158 mAh/g), and excellent capacity retention (99%). This study demonstrates the superiority of Al(OH)3 over Al2O3 in modifying the electrochemical properties of native LiCo1/3Ni1/3Mn1/3O2 cathodes, as desired for practical lithium battery applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. J.F. Ni, H.H. Zhou, J.T. Chen, and X.X. Zhang, Mater. Lett. 59, 2361 (2005).10.1016/j.matlet.2005.02.080 ↗
2. P. Kalyani and N. Kalaiselvi, Sci. Technol. Adv. Mater. 6, 689 (2005).10.1016/j.stam.2005.06.001 ↗
3. J.M. Kim and H.T. Chung, J. Power Sources 115, 125 (2003).10.1016/S0378-7753(02)00709-7 ↗
4. S.-T. Myung, S. Komabo, N. Hirosaki, H. Yashiro, and N. Kumagai, Electrochim. Acta 49, 4213 (2004).10.1016/j.electacta.2004.04.016 ↗
5. N. Jayaprakash, N. Kalaiselvi, and Y.K. Sun, Electrochem. Commun. 13, 455 (2008).10.1016/j.elecom.2007.12.029 ↗
6. L. Zhang, X. Wang, T. Muta, D. Li, H. Noguchi, M. Yoshio, R. Ma, K. Takada, and T. Sasaki, J. Power Sources 162, 629 (2006).10.1016/j.jpowsour.2006.06.089 ↗
7. G.T.-K. Fey, P. Muralidharan, C.-Z. Lu, and Y.-D. Cho, Solid State Ionics 176, 2759 (2005).10.1016/j.ssi.2005.09.002 ↗
8. F. Wu, M. Wang, Y. Su, and S. Chen, J. Power Sources 189, 743 (2009).10.1016/j.jpowsour.2008.08.014 ↗
9. G.T.-K. Fey, C.-Z. Lu, T. Premkuar, and Y.-C. Chang, Surf. Coat. Technol. 199, 22 (2005).10.1016/j.surfcoat.2005.03.021 ↗
10. Y.-K. Sun, K.-J. Hong, J. Prakash, and K. Amine, Electrochem. Commun. 4, 344 (2002).10.1016/S1388-2481(02)00277-1 ↗
11. G.T.-K. Fey, C.-S. Chang, and T. Premkumar, J. Solid State Electron. 14, 17 (2010).10.1007/s10008-008-0772-3 ↗
12. F. Wu, M. Wang, Y. Su, L. Bao, and S. Chen, Electrochim. Acta 54, 6803 (2009).10.1016/j.electacta.2009.06.075 ↗
13. S.B. Jang, S.-H. Kang, K. Amine, Y.C. Bae, and Y.K. Sun, Electrochim. Acta 50, 4168 (2005).10.1016/j.electacta.2005.01.037 ↗
14. D. Gangulibabu, N. Bhuvaneswari, N. Kalaiselvi, N. Jayaprakash, and P. Periasamy, J. Sol-Gel. Sci. Technol. 49, 137 (2009).10.1007/s10971-008-1870-5 ↗
15. K.M. Shaju, G.V. Subba Rao, and B.V.R. Chowdari, Electrochim. Acta 48, 145 (2002).10.1016/S0013-4686(02)00593-5 ↗
16. P. reale, D. Privitera, S. Panero, and B. Scrosati, Solid State Ionics 178, 1390 (2007).10.1016/j.ssi.2007.07.016 ↗
17. M. Sathiya, A.S. Prakash, K. Ramesha, and A.K. Shukla, Mater. Res. Bull. 44, 1990 (2009).10.1016/j.materresbull.2009.06.007 ↗
18. G.T.-K. Fey, J.G. Chen, and T. Premkumar, J. Appl. Electrochem. 35, 177 (2005).10.1007/s10800-004-5822-7 ↗