journal article·2011-02

Early Interfacial Reaction and Formation of Intermetallic Compounds in the Sn-3.5Ag/Cu Soldering System

M. B. Zhou, X. Ma, X. P. Zhang

Journal of Electronic Materials· Volume 40· Issue 2
Publisher page

Abstract

The early interfacial reaction in the Sn-3.5Ag/Cu soldering system and the system’s premelting behavior were found and characterized by differential scanning calorimetry incorporated into the reflow process. The results show that the early interfacial reaction occurs by way of melting and wetting of the solder layer adjacent to the Cu substrate at a temperature nearly 4°C below the actual melting point of Sn-3.5Ag solder due to solid-state diffusion of Cu atoms into the Sn-3.5Ag binary solder. Consequently, the early interfacial reaction brings about formation of Cu-Sn intermetallic compounds (IMCs) at a temperature below the melting point of Sn-3.5Ag, and a prolonged early interfacial reaction can lead to change of the Cu-Sn IMC morphology from planar-like to scallop-like and promote excessive growth of IMCs at the interface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Intermetallics and Advanced Alloy Properties · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. T. Laurila, V. Vuorinen, and J.K. Kivilahti, Mater. Sci. Eng. R 49, 1 (2005).10.1016/j.mser.2005.03.001 ↗
2. T. Laurila, V. Vuorinen, and M. Paulasto-Kröckel, Mater. Sci. Eng. R 68, 1 (2010).10.1016/j.mser.2009.12.001 ↗
3. Y.C. Chan and D. Yang, Prog. Mater. Sci. 55, 428 (2010).10.1016/j.pmatsci.2010.01.001 ↗
4. K.N. Tu, Mater. Chem. Phys. 46, 217 (1996).10.1016/S0254-0584(97)80016-8 ↗
5. M. Kajihara, Acta Mater. 52, 1193 (2004).10.1016/j.actamat.2003.10.047 ↗
6. T. Sakama and M. Kajihara, J. Alloys Compd. 475, 608 (2009).10.1016/j.jallcom.2008.07.113 ↗
7. P. Yao, P. Liu, and J. Liu, Microelectron. Eng. 86, 1969 (2009).10.1016/j.mee.2008.12.013 ↗
8. K. Zeng and K.N. Tu, Mater. Sci. Eng. R 38, 55 (2002).10.1016/S0927-796X(02)00007-4 ↗
9. J.C. Gong, C.Q. Liu, P.P. Conway, and V.V. Silberschmidt, Acta Mater. 56, 4291 (2008).10.1016/j.actamat.2008.04.063 ↗
10. J.C. Gong, C.Q. Liu, P.P. Conway, and V.V. Silberschmidt, Scripta Mater. 60, 333 (2009).10.1016/j.scriptamat.2008.10.029 ↗
11. M.S. Park and R. Arróyave, Acta Mater. 58, 4900 (2010).10.1016/j.actamat.2010.05.028 ↗
12. M.B. Zhou, X.P. Li, X. Ma, and X.P. Zhang, Acta Metall. Sin. 46, 569 (2010).10.3724/SP.J.1037.2009.00566 ↗
13. H.C. Bhedwar, K.K. Ray, S.D. Kulkarni, and V. Balasubramanian, Scripta Metall. 6, 919 (1972).10.1016/0036-9748(72)90145-7 ↗
14. T. Takenaka, S. Kano, M. Kajihara, N. Kurokawa, and K. Sakamoto, Mater. Sci. Eng. A 396, 115 (2005).10.1016/j.msea.2005.01.025 ↗
15. M.E. Loomans and M.E. Fine, Metall. Mater. Trans. A 31, 1155 (2000).10.1007/s11661-000-0111-5 ↗
16. H. Baker and H. Okamoto, ASM Handbook. Vol. 3: Alloy Phase Diagrams: Section 2 (Materials Park, OH: ASM International, 1992).
17. K.W. Moon, W.J. Boettinger, U.R. Kattner, F.S. Biancaniello, and C.A. Handwerker, J. Electron. Mater. 29, 1122 (2000).10.1007/s11664-000-0003-x ↗
18. D. Ma, W.D. Wang, and S.K. Lahiri, J. Appl. Phys. 91, 3312 (2002).10.1063/1.1445283 ↗