journal article·2006-03

Ohmic contact using the Si nano-interlayer for undoped-AlGaN/GaN heterostructures

Ho-Young Cha, X. Chen, H. Wu, W. J. Schaff, M. G. Spencer, L. F. Eastman

Journal of Electronic Materials· Volume 35· Issue 3
Publisher page

Abstract

Excellent ohmic characteristics for undoped-AlGaN/GaN heterostructures have been achieved by using a Si nano-interlayer: a 1-nm Si layer has been evaporated followed by Ti/Al/Mo/Au evaporation. A contact transfer resistance of 0.18 Ω-mm and a specific contact resistivity of 1 × 10−6 Ω-cm2 have been achieved along with excellent surface morphology at an optimized annealing temperature (800°C). Both ohmic contact characteristics and surface morphology are significantly better than those obtained without the Si nano-interlayer. Auger depth profiles and temperature-dependent current-voltage characteristics were investigated to understand ohmic formation. It is suggested that titanium silicide formation at the interface during rapid thermal annealing lowers the barrier height and enhances thermionic emission current.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: GaN-based semiconductor devices and materials · Semiconductor materials and devices · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. N.A. Papanicolaou, A. Edwards, M.V. Rao, J. Mittereder, and W.T. Anderson, J. Appl. Phys. 87, 380 (2004).10.1063/1.371871 ↗
2. S. Noor Mohammad, J. Appl. Phys. 95, 4856 (2004).10.1063/1.1664029 ↗
3. C.-J. Youn and K.-Y. Kang, Jpn. J. Appl. Phys. 39, 3955 (2000).10.1143/JJAP.39.3955 ↗
4. V. Desmaris, J. Eriksson, N. Rorsman, and H. Zirath, Electrochem. Solid-State Lett. 7, G72 (2004).10.1149/1.1649399 ↗
5. V. Kumar, L. Zhou, D. Selvanathan, and I. Adesida, J. Appl. Phys. 92, 1712 (2002).10.1063/1.1491584 ↗
6. B.P. Luther, S.E. Mohney, T.N. Jackson, M.A. Khan, Q. Chen, and J.W. Wang, Appl. Phys. Lett. 70, 57 (1997).10.1063/1.119305 ↗
7. R.C. Fitch et al., Appl. Phys. Lett. 84, 1495 (2004).10.1063/1.1651649 ↗
8. D. Selvanathan, L. Zhou, V. Kumar, and I. Adesida, Phys. Status Solidi 194, 583 (2002).10.1002/1521-396X(200212)194:2<583::AID-PSSA583>3.0.CO;2-3 ↗
9. H. Yu, L. McCarthy, S. Rajan, S. Keller, S. Denbaars, J. Speck, and U. Mishra, IEEE Electron Dev. Lett 26, 283 (2005).10.1109/LED.2005.846583 ↗
10. H.W. Jang, J.J. Kim, C.M. Jeon, and J.-L. Lee, MRS Internet J. Nitride Semiconduct. Res. 6, 1 (2001).10.1557/S1092578300000132 ↗
11. D.-W. Kim and H.K. Baik, Appl. Phys. Lett. 77, 1011 (2000).10.1063/1.1289057 ↗
12. Y. Sun, X. Chen, and L.F. Eastman, J. Appl. Phys. 98, 053701 (2005).10.1063/1.2035314 ↗
13. C. Osburn, Rapid Thermal Processing, Science and Technology, ed. R.B. Fair (Boston, MA: Academic Press, Inc., 1993), p. 227–310.10.1016/B978-0-12-247690-7.50010-X ↗