journal article·2019-02

Temperature Stable Microwave Dielectric Ceramic CoTiNb2O8-Zn1.01Nb2O6 with Ultra-Low Dielectric Loss

Yun Zhang, Shihua Ding, Lu You, Yingchun Zhang

Journal of Electronic Materials· Volume 48· Issue 2
Publisher page

Abstract

(1 − x)CoTiNb2O8-xZn1.01Nb2O6 ceramics were prepared via a conventional solid-state reaction route to obtain near-zero τf. The effects of Zn1.01Nb2O6 content on the phase, microstructure and microwave dielectric properties of CoTiNb2O8 ceramics were investigated. X-ray diffraction (XRD) revealed a mixture of tetragonal rutile and orthorhombic columbite phases co-existed over the entire range. Both the sintering behavior and quality factor (Q × f) of matrix ceramics were enhanced effectively by the addition of Zn1.01Nb2O6. On the other hand, the relative permittivity (er) decreased linearly from 41.6 to 24.8. The temperature coefficient of resonant frequency (τf) could be controlled by adjusting the x value. When $$ x = 0.8 $$ , the composite ceramic sintered at 1200°C possessed optimum microwave dielectric properties with $$ \varepsilonr \sim 27.8 $$ , $$ Q \times f \sim 94{,}700\;{\hbox{GHz}} $$ , and $$ \tauf \sim 0 $$ ppm/°C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microwave Dielectric Ceramics Synthesis · Ferroelectric and Piezoelectric Materials · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. S.Z. Hao, D. Zhou, W.B. Li, and L.X. Pang, J. Electron. Mater. 46, 6241 (2017).10.1007/s11664-017-5658-7 ↗
2. Y.C. Liou and Y.C. Wu, J. Electron. Mater. 46, 2387 (2017).10.1007/s11664-017-5295-1 ↗
3. W.X. Wen, C.C. Li, Y.H. Sun, Y. Tang, and L. Fang, J. Electron. Mater. 47, 1003 (2018).10.1007/s11664-017-5957-z ↗
4. A. Templeton, X.R. Wang, S.J. Penn, S.J. Webb, L.F. Cohen, and N.M. Alford, J. Am. Ceram. Soc. 83, 95 (2000).10.1111/j.1151-2916.2000.tb01154.x ↗
5. L.X. Pang, H. Wang, D. Zhou, and X. Yao, J. Electroceram. 23, 13 (2009).10.1007/s10832-008-9501-7 ↗
6. L.X. Pang, H. Wang, D. Zhou, and X. Yao, J. Am. Ceram. Soc. 91, 2947 (2008).10.1111/j.1551-2916.2008.02585.x ↗
7. E.S. Kim and D.H. Kang, Ceram. Int. 34, 883 (2008).10.1016/j.ceramint.2007.09.049 ↗
8. D. Zhou, D. Guo, W.B. Li, L.X. Pang, X. Yao, D.W. Wang, and I.M. Reaney, J. Mater. Chem. C 4, 5357 (2016).10.1039/C6TC01431C ↗
9. D. Zhou, L.X. Pang, D.W. Wang, C. Li, B.B. Jin, and I.M. Reaney, J. Mater. Chem. C 5, 10094 (2017).10.1039/C7TC03623J ↗
10. A. Baumgarte and R. Blachnik, J. Alloys Compd. 215, 117 (1994).10.1016/0925-8388(94)90827-3 ↗
11. C.F. Tseng, J. Eur. Ceram. Soc. 34, 3641 (2014).10.1016/j.jeurceramsoc.2014.06.010 ↗
12. Y. Zhang, Y.C. Zhang, and M.Q. Xiang, Ceram. Int. 42, 3542 (2016).10.1016/j.ceramint.2015.10.162 ↗
13. R.C. Pullar, J. Am. Ceram. Soc. 92, 563 (2009).10.1111/j.1551-2916.2008.02919.x ↗
14. Y.C. Liou and Y.L. Sung, Ceram. Int. 34, 371 (2008).10.1016/j.ceramint.2006.10.016 ↗
15. H.J. Lee, I.T. Kim, and K.S. Hong, Jpn. J. Appl. Phys. 36, L1318 (1997).10.1143/JJAP.36.L1318 ↗
16. A. Belous, O. Ovchar, B. Jancar, and J. Bezjak, J. Eur. Ceram. Soc. 27, 2933 (2007).10.1016/j.jeurceramsoc.2006.11.017 ↗
17. Y. Zhang, Y.C. Zhang, and M.Q. Xiang, Mater. Lett. 178, 175 (2016).10.1016/j.matlet.2016.05.009 ↗
18. J. Zhang and Z.X. Yue, Ceram. Int. 43, S317 (2017).10.1016/j.ceramint.2017.05.293 ↗
19. B.W. Hakki and P.D. Coleman, IEEE Trans. Microw. Theory Tech. 8, 402 (1960).10.1109/TMTT.1960.1124749 ↗
20. W.E. Courtney, IEEE Trans. Microw. Theory Tech. 18, 476 (1970).10.1109/TMTT.1970.1127271 ↗
21. Y. Kobayashiy and M. Katoh, IEEE Trans. Microw. Theory Tech. 33, 586 (1985).10.1109/TMTT.1985.1133033 ↗
22. P. Sarah and S. Suryanarayana, Bull. Mater. Sci. 26, 745 (2003).10.1007/BF02706773 ↗
23. Y.C. Chen and R.Y. Syu, J. Mater. Sci.: Mater. Electron. 27, 6979 (2016).
24. W.S. Kim, T.H. Kim, and E.S. Kim, J. Jpn. Appl. Phys. 37, 5367 (1998).10.1143/JJAP.37.5367 ↗
25. Y.C. Chen and Y.W. Zeng, J. Alloys Compd. 481, 369 (2009).10.1016/j.jallcom.2009.02.133 ↗
26. X.P. Lu, Y. Zheng, Z.W. Dong, and Q. Huang, Mater. Lett. 131, 1 (2014).10.1016/j.matlet.2014.05.169 ↗
27. J.W. Choi, S. Kucheiko, S.J. Yoon, J. Jai, and K.H. Yoon, J. Am. Ceram. Soc. 84, 2570 (2001).10.1111/j.1151-2916.2001.tb01055.x ↗
28. L.A. Khalam, S. Thomas, and M.T. Sebastian, J. Am. Ceram. Soc. 90, 2476 (2007).10.1111/j.1551-2916.2007.01808.x ↗
29. K.P. Surendran and M.T. Sebastian, J. Mater. Res. 20, 2919 (2005).10.1557/JMR.2005.0384 ↗
30. C.F. Tseng and C.L. Huang, Mater. Res. Bull. 42, 9 (2006).10.1016/j.materresbull.2006.05.017 ↗
31. C.F. Yang, C.C. Chan, C.M. Cheng, and Y.C. Chen, J. Eur. Ceram. Soc. 25, 2849 (2005).10.1016/j.jeurceramsoc.2005.03.154 ↗
32. J.W. Choi, J.Y. Ha, S.J. Yoon, H.J. Kim, and K.H. Yoon, J. Eur. Ceram. Soc. 23, 2507 (2003).10.1016/S0955-2219(03)00170-5 ↗
33. C.H. Su, Y.D. Ho, and C.L. Huang, J. Alloys Compd. 607, 67 (2014).10.1016/j.jallcom.2014.03.131 ↗