Electrochemically Anodized Ultralong TiO2 Nanotubes for Supercapacitors
Source abstract
Abstract
TiO2 nanotubes for use in supercapacitors have been successfully deposited onto titanium foil by electrochemical anodization for 4 h at 60 V and their morphological and structural characteristics investigated by field-emission scanning electron microscopy (FE-SEM), energy-dispersive x-ray spectroscopy, x-ray diffraction (XRD) analysis, and electrochemical measurements. FE-SEM revealed TiO2 nanotubes with diameter of ∼ 80 nm and length of 18 μm. XRD confirmed formation of TiO2 phase with anatase crystal structure. Electrochemical measurements revealed large specific capacitance of 33.7 F g−1, high energy density of 41.75 W h kg−1 at power density of 176 W kg−1, and long-term cycling performance with 72% capacitance retention after 2000 cycles for the TiO2 nanotubes. These results indicate that such TiO2 nanotubes have potential to become a promising electrode material for use in energy storage devices such as supercapacitors and batteries due to their high chemical, thermal, and electrochemical stability with good charge storage capability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · TiO2 Photocatalysis and Solar Cells · Advancements in Battery Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. A.S. Aricò, P. Bruce, B. Scrosati, J.M. Tarascon, and W. Van Schalk-wijk, Nat. Mater. 4, 366 (2005).10.1038/nmat1368 ↗
2. M. Salari, S.H. Aboutalebi, K. Konstantinov, and H.K. Liu, Phys. Chem. Chem. Phys. 13, 5038 (2011).10.1039/c0cp02054k ↗
3. J.V. Patil, S.S. Mali, J.S. Shaikh, T.S. Bhat, C.K. Hong, J.H. Kim, and P.S. Patil, Appl. Phys. A 124, 592 (2018).10.1007/s00339-018-1937-2 ↗
4. J.V. Patil, S.S. Mali, C.K. Hong, J.H. Kim, and P.S. Patil, Appl. Phys. A 123, 610 (2017).10.1007/s00339-017-1197-6 ↗
5. J.A. Park, J. Moon, S.J. Lee, S.C. Lim, and T. Zyung, Curr. Appl. Phys. 9, 210 (2009).10.1016/j.cap.2009.01.044 ↗
6. M.M. Arafat, B. Dinan, S.A. Akbar, and A.S.M.A. Haseeb, Sensors 12, 7207 (2012).10.3390/s120607207 ↗
7. H. Xiang, Y. Long, X. Yu, X. Zhang, N. Zhao, and J. Xu, CrystEngComm 13, 4856 (2011).10.1039/c0ce00980f ↗
8. D.H. Shin, J.S. Lee, J. Jun, and J. Jang, J. Mater. Chem. A 2, 3364 (2014).10.1039/C3TA14900E ↗
9. X. He, C.P. Yang, G.L. Zhang, D.W. Shi, Q.A. Huang, H.B. Xiao, Y. Liub, and R. Xiong, Mater. Des. 106, 74 (2016).10.1016/j.matdes.2016.05.025 ↗
10. S. S. Mali, H, Kim, C. S. Shim, P. S. Patil, J. H. Kim and C. K. Hong, Sci. Rep., 3, 3004 (2013).10.1016/j.electacta.2015.03.113 ↗
11. B. Zhang, Z.L. Xu, and J.K. Kim, RSC Adv. 4, 12298 (2014).10.1039/C4RA00152D ↗
12. J.Y. Leng, X.J. Xu, N. Lv, H.T. Fan, and T. Zhang, J. Colloids Interface Sci. 356, 54 (2011).10.1016/j.jcis.2010.11.079 ↗
13. V.A. Ganesh, A.S. Nair, H.K. Raut, T.M. Walsh, and S. Ramakrishna, RSC Adv. 2, 2067 (2012).10.1039/c2ra00921h ↗
14. M. Paulose, K. Shankar, O.K. Varghese, G.K. Mor, and C.A. Grimes, J. Phys. D Appl. Phys. 39, 2498 (2006).10.1088/0022-3727/39/12/005 ↗
15. S.S. Mali, J.V. Patil, P.M. Kadam, H.P. Deshamukh, C.S. Shim, P.S. Patil, and C.K. Hong, J. Nanopart. Res. 16, 2406 (2014).10.1007/s11051-014-2406-2 ↗
16. S.S. Mali, C.S. Shim, H. Kim, J.V. Patil, D.H. Ahn, P.S. Patil, and C.K. Hong, Electrochim. Acta 166, 356 (2015).10.1016/j.electacta.2015.03.113 ↗
17. J.V. Patil, S.S. Mali, A.S. Kamble, C.K. Hong, J.H. Kim, and P.S. Patil, Appl. Surf. Sci. 423, 641 (2017).10.1016/j.apsusc.2017.06.116 ↗
18. S.S. Mali, C.S. Shim, H. Kim, and C.K. Hong, Nanoscale 8, 2664 (2016).10.1039/C5NR07395B ↗
19. P. Roy, S. Berger, and P. Schmuki, Angew. Chem. Int. Ed. 50, 2904 (2011).10.1002/anie.201001374 ↗
20. J.M. Macák, H. Tsuchiya, and P. Schmuki, Angew. Chem. Int. Edi. 44, 2100 (2005).10.1002/anie.200462459 ↗
21. S.P. Albu, A. Ghicov, J.M. Macak, R. Hahn, and P. Schmuki, Nano Lett. 7, 1286 (2007).10.1021/nl070264k ↗
22. S.S. Mali, C.A. Betty, P.N. Bhosale, and P.S. Patil, CrystEngComm 13, 6349 (2011).10.1039/c1ce05928a ↗
23. P.S. Shinde, P.S. Patil, P.N. Bhosale, A. Bruger, G. Nauer, M. Neumann-Spallart, and C.H. Bhosale, Appl. Catal. B Environ. 89, 288 (2009).10.1016/j.apcatb.2009.02.025 ↗
24. S.K. Pradhan, P.J. Reucroft, F. Yang, and A. Dozier, J. Cryst. Growth 256, 83 (2003).10.1016/S0022-0248(03)01339-3 ↗
25. J.M. Macak, S.P. Albu, and P. Schmuki, Phys. Status Solid RRL 1, 181 (2007).10.1002/pssr.200701148 ↗
26. J.M. Macak, B.G. Gong, M. Hueppe, and P. Schmuki, Adv. Mater. 19, 3027 (2007).10.1002/adma.200602549 ↗
27. J.M. Macak, P.J. Barczuk, H. Tsuchiya, M.Z. Nowakowska, A. Ghicov, M. Chojak, V. Bauer, S. Virtanen, P.J. Kulesza, and P. Schmuki, Electrochem. Commun. 7, 1417 (2005).10.1016/j.elecom.2005.09.031 ↗
28. J.M. Macak, F. Schmidt-Stein, and P. Schmuki, Electrochem. Commun. 9, 1783 (2007).10.1016/j.elecom.2007.04.002 ↗
29. Y. Xie, L. Zhou, C. Huang, H. Huang, and J. Lu, Electrochim. Acta 53, 3643 (2008).10.1016/j.electacta.2007.12.037 ↗
30. A. Tamilselvan, S. Balakumar, Ionics 22, 99 (2016).10.1007/s11581-015-1526-8 ↗