journal article·2018-12

Study of Three-Dimensional Small Chip Stacking Using Low Cost Wafer-Level Micro-bump/B-Stage Adhesive Film Hybrid Bonding and Via-Last TSVs

Mingjun Yao, Ning Zhao, Teng Wang, Daquan Yu, Zhiyi Xiao, Haitao Ma

Journal of Electronic Materials· Volume 47· Issue 12
Publisher page

Abstract

Three-dimensional (3-D) small chip stacking using low cost wafer-level insert-bump hybrid bonding and via-last TSVs is proposed and investigated. The proposed hybrid bonding method realized by micro Cu pillar solder bumps and photo-patternable B-stage adhesive film has been successfully applied to an 8 inch wafer with 86 255 gross dies and a bump pitch of 150 μm. The complete process flow is successfully validated and a well electrical connectivity for the whole wafer is obtained. Two hybrid bonding approaches, i.e., “adhesive-first” hybrid bonding and “Cu pillar bump-first” hybrid bonding, are studied. A void-free hybrid bonding interface with a final gap between top chip and bottom chip lower than 30 μm is achieved using the “Cu pillar bump-first” hybrid bonding approach. The interaction of SnAg solder with electroless Ni-P/immersion Au and electro Ni are investigated. Two types of interfacial compounds, i.e., Ni3Sn4 and P-rich Ni layer containing Sn atoms, are found. The via-last through silicon vias (TSVs) have a diameter of 40 μm and a depth of 95 μm. The results indicate that it is a promising method for 3-D integrated circuits stacking technology using hybrid bonding and via-last TSVs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Nanofabrication and Lithography Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. G.E. Moore, Electronics 38, 8 (1965).
2. G.E. Moore, in IEEE IEDM Tech. Digest (1975), p. 11.
3. E. Beyne, IEEE Des. Test. 33, 3 (2016).10.1109/MDAT.2016.2544837 ↗
4. J.H. Lau, C.K. Lee, C.J. Zhan, S.T. Wu, Y.L. Chao, M.J. Dai, R.M. Tain, H.C. Chien, J.F. Hung, C.H. Chien, R.S. Cheng, Y.W. Huang, Y.M. Cheng, L.L. Liao, W.C. Lo, and M.J. Kao, IEEE Trans. Compon. Packag. Manuf. Technol. 4, 9 (2014).
5. T.C. Lee, Y.S. Chang, C.M. Hsu, S.C. Hsieh, P.N. Lee, Y.C. Hsieh, L.C. Wang, and L.J. Zhang, in IEEE Electronic Components and Technology Conference (2017), p. 631.
6. S. Katsuyuki, K. Sayuri, S. Kuniaki, O. Yasumitsu, K. Mikio, A. Kazuo, H. Yoshikazu, and U.K. John, J. Micromech. Microeng. 21, 3 (2011).
7. J.W. Nah, M.A. Gaynes, C. Feger, S. Katsurayama, and H. Suzuki, in IEEE Electronic Components and Technology Conference (2011), p. 1015.
8. H. Lee, S. Lee, S. Cho, Y. Yu, J. Park, and K.W. Paik, in IEEE Electronic Components and Technology Conference (2017), p. 399.
9. L. Xie, S. Wickramanayaka, S.C. Chong, V.N. Sekhar, D. Ismeal, and Y.L. Ye, in IEEE Electronic Components and Technology Conference (2016), p. 2126.
10. L. Xie, S. Wickramanayaka, B.Y. Jung, J.A.J. Li, L. Jung-kai, and D. Ismael, in IEEE Electronics Packaging Technology Conference (2014), p. 400.
11. T. Nagamatsu, K. Honjo, K. Ebisawa, T. Ishimatsu, T. Saito, D. Mori, D. Motomura, and H. Yagi, in IEEE Electronic Components and Technology Conference (2016), p. 923.
12. L. Yang, D. Tian, Y.M. Cheung, and M. Li, in IEEE Electronics Packaging Technology Conference (2015), p. 1.10.1109/EPTC.2015.7412382 ↗
13. S. Kawamoto, O. Suzuki, and Y. Abe, in IEEE Electronic Components and Technology Conference (2006), p. 6.
14. Y. Beilliard, R. Estevez, G. Parry, P. McGarry, L. Di Cioccio, and P. Coudrain, Int. J. Solids Struct. 117, 208 (2016).10.1016/j.ijsolstr.2016.02.041 ↗
15. H. Ran, M. Fujino, A. Yamauchi, and T. Suga, ECS Trans. 75, 9 (2016).
16. S. Lhostis, A. Farcy, E. Deloffre, F. Lorut, S. Mermoz, Y. Henrion, L. Berthier, F. Bailly, D. Scevola, F. Guyader, F. Gigon, C. Besset, S. Pellissier, L. Gay, N. Hotellier, A.-L. Le Berrigo, S. Moreau, V. Balan, F. Fournel, A. Jouve, S. Chéramy, M. Arnoux, B. Rebhan, G.A. Maier, and L. Chitu, in IEEE Electronic Components and Technology Conference (2016), p. 869.
17. Y. Kagawa, N. Fujii, K. Aoyagi, Y. Kobayashi, S. Nishi, N. Todaka, S. Takeshita, J. Taura, H. Takahashi, Y. Nishimura, K. Tatani, M. Kawamura, H. Nakayama, T. Nagano, K. Ohno, H. Iwamoto, S. Kadomura, and T. Hirayama, in IEEE Electron Devices Meeting (2016), p. 8.4.1.10.1109/IEDM.2016.7838375 ↗
18. M. Ohyama, M. Nimura, J. Mizuno, S. Shoji, T. Nonaka, Y. Shinba, and A. Shigetou, Microelectron. Reliab. 59, 134 (2016).10.1016/j.microrel.2015.12.033 ↗
19. Y.J. Chang, C.T. Ko, T.H. Yu, C.H. Chiang, and K.N. Chen, IEEE Electron Device Lett. 34, 3 (2013).10.1109/LED.2012.2222338 ↗
20. K. Lee, J. Bea, T. Fukushima, S. Ramalingam, X. Wu, T. Tanaka, and M. Koyanagi, IEEE Electron Device Lett. 37, 1 (2016).10.1109/LED.2016.2623906 ↗
21. Y. Beilliard, S. Moreau, L.D. Cioccio, P. Coudrain, G. Romano, A. Nowodzinski, F. Aussenac, P.H. Jouneau, E. Rolland, and T. Signamarcheix, in IEEE 3D Systems Integration Conference (2014), p. 1.10.1109/3DIC.2014.7274306 ↗
22. Z. Song, Z. Tan, L. Liu, and Z. Wang, Microsyst. Technol. 21, 8 (2015).
23. Y.J. Chang, C.T. Ko, Z.C. Hsiao, C.H. Chiang, H.C. Fu, T.H. Yu, C.H. Fan, W.C. Lo, and K.N. Chen, in IEEE Electronic Components and Technology Conference (2013), p. 64.
24. F.J. Blanco, M. Agirregabiria, J. Garcia, J. Berganzo, M. Tijero, M.T. Arroyo, J.M. Ruano, I. Aramburu, and K. Mayora, J. Micromech. Microeng. 14, 7 (2004).10.1088/0960-1317/14/7/027 ↗
25. M.P. Zussman, C. Milasincic, A. Rardin, S. Kirk, and T. Itabashi, J. Microelectron. Electron. Packag. 7, 4 (2010).10.4071/imaps.260 ↗
26. R. Agarwal, N. Pham, R. Cotrin, A. Andrei, W. Ruythooren, F. Iker, and P. Soussan, in IEEE Electronics Packaging Technology Conference (2009), p. 267.
27. M.J. Yao, J. Fan, N. Zhao, Z.Y. Xiao, D.Q. Yu, and H.T. Ma, J. Mater. Sci. Mater. Electron. 28, 12 (2017).10.1007/s10856-016-5818-y ↗
28. F. Niklaus, P. Enoksson, E. Kälvesten, and G. Stemme, Sens. Actuators A Phys. 107, 3 (2003).10.1016/S0924-4247(03)00356-X ↗
29. K.N. Chen, Z. Xu, and J.Q. Lu, IEEE Electron Device Lett. 32, 8 (2011).
30. A. Sharif, M. Islam, and Y. Chan, Mater. Sci. Eng. B 113, 3 (2004).10.1016/S0921-5107(04)00406-4 ↗
31. C.K. Chung, Y.J. Chen, W.M. Chen, and C.R. Kao, Acta Mater. 60, 11 (2012).10.1016/j.actamat.2012.02.018 ↗
32. K. Zeng and K.N. Tu, Mater. Sci. Eng. R 38, 2 (2002).10.1016/S0927-796X(02)00007-4 ↗
33. A. Kumar and Z. Chen, J. Electron. Mater. 40, 2 (2011).
34. T. Laurila and V. Vuorinen, Materials 2, 4 (2009).10.3390/ma2041796 ↗
35. Y.D. Jeon, K.W. Paik, K.S. Bok, W.S. Choi, and C.L. Cho, J. Electron. Mater. 31, 5 (2002).10.1007/s11664-002-0109-4 ↗
36. Y.D. Jeon, K.W. Paik, K.S. Bok, W.S. Choi, and C.L. Cho, in IEEE Electronic Components and Technology Conference (2001), p. 1326.
37. G.Y. Jang, J.W. Lee, and J.G. Duh, J. Electron. Mater. 33, 10 (2004).