journal article·2019-01

Nucleation and Growth of Tin Hillocks by In Situ Nanoindentation

Irene Lujan-Regalado, Antony Kirubanandham, Jason J. Williams, Nikhilesh Chawla

Journal of Electronic Materials· Volume 48· Issue 1
Publisher page

Abstract

For several decades, tin whiskers have been a major reliability issue in the microelectronics industry. These single crystalline tin filaments can grow long enough to cause short circuiting and device failure. Although tin whisker/hillock growth is driven by compressive stresses, a mechanistic model of their formation, evolution, and microstructural influence has not been fully developed. In this work, the growth of mechanically induced tin whiskers/hillocks was studied using an in situ nanoindenter and electron backscatter diffraction in a dedicated scanning electron microscope. Electroplated Sn-on-Cu samples were indented and monitored in vacuum to study their growth behavior without the influence of atmosphere. Aging experiments were conducted to study the effect of intermetallics on hillock growth. The grain orientation of the hillocks and the plastically deformed area surrounding the indentation were studied on slabs lifted out of the sample with the use of focused ion beam. High-angle grain boundaries were seen to favor the formation of Sn hillocks. A finite element model was developed to study the evolution of the compressive stress state in the Sn plating and the results showed good agreement with the experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Copper Interconnects and Reliability · Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. K.N. Tu, Phys. Rev. B 49, 3 (1994).
2. M. Sampson, Tin Whisker (and Other Metal Whisker) Homepage (2009). http://nepp.nasa.gov/whisker/backgrou nd/index.htm . Accessed 25 Mar 2018.
3. V.G. Karpov, SMT Mag. 30, 2 (2015).
4. A.C. Vasko, C.R. Grice, A.D. Kostik, and V.G. Karpov, MRS Commun. 5, 04 (2015).10.1557/mrc.2015.64 ↗
5. M. Schlesinger and M. Paunovic, Modern Electroplating, Vol. 55 (New York: Wiley, 2011), pp. 433–446.
6. M. Warwick, J. SMTA 12, 1 (1999).
7. J.J. Williams, N.C. Chapman, and N. Chawla, JEM 42, 2 (2012).
8. R. Weil, Plating 58, 1 (1971).
9. W.J. Boettinger, C.E. Johnson, L.A. Bendersky, and K.W. Moon, Acta Mater. 53, 19 (2005).
10. C. Xu, Y. Zhang, C. Fan, and J.A. Abys, IEEE Trans. Electron. Packag. Manuf. 28, 1 (2005).10.1109/TEPM.2005.849685 ↗
11. T. Shibutani, Q. Yu, T. Yamashita, and M. Shiratori, IEEE Trans. Electron. Packag. Manuf. 29, 4 (2006).10.1109/TEPM.2006.887357 ↗
12. K.N. Tu, C. Chen, and A.T. Wu, J. Mater. Sci. Mater. Electron. 18, 1 (2006).10.1007/s10854-006-9029-z ↗
13. N. Jadhav, E.J. Buchovecky, L. Reinbold, S. Kumar, A.F. Bower, and E. Chason, IEEE Trans. Electron. Packag. Manuf. 33, 3 (2010).10.1109/TEPM.2010.2093391 ↗
14. S.K. Kang, J. Chang, J.H. Lee, K.S. Kim, and H.M. Lee, in Electronic Components and Technology Conference (ECTC) IEEE 63rd. (2013), pp. 1018–1023.
15. S.K. Lin, Y. Yorikado, J. Jiang, K.S. Kim, K. Suganuma, S.W. Chen, M. Tsujimoto, and I. Yanada, JMR 22, 7 (2007).
16. S.K. Lin, Y. Yorikado, J. Jiang, K.S. Kim, K. Suganuma, S.W. Chen, M. Tsujimoto, and I. Yanada, JEM 36, 12 (2007).
17. K. Doudrick, J. Chinn, J. Williams, N. Chawla, and K. Rykaczewski, Microelectron. Reliab. 55, 5 (2015).10.1016/j.microrel.2015.02.014 ↗
18. R. Vallabhaneni, E. Izadi, C.R. Mayer, C.S. Kaira, S.S. Singh, J. Rajagopalan, and N. Chawla, Microelectron. Reliab. 79 (2017).10.1016/j.microrel.2017.07.042 ↗
19. M.A. Dudek and N. Chawla, Acta Mater. 57, 4588 (2009).10.1016/j.actamat.2009.06.031 ↗
20. Y. Mizuguchi, Y. Murakami, S. Tomiya, T. Asai, T. Kiga, and K. Suganuma, J. Electron. Mater. 41, 7 (2012).10.1007/s11664-012-1962-4 ↗
21. C. Hillman, G. Kittlesen, and R. Schueller, A new (better) approach to tin whisker mitigation, DfR Solutions White Paper (2011).
22. A. Kirubanandham, I. Lujan-Regalado, R. Vallabhaneni, and N. Chawla, JOM 68, 11 (2016).10.1007/s11837-016-2042-7 ↗
23. B. Illés, B. Horváth, and G. Harsányi, Surf. Coat. Technol. 205, 7 (2010).10.1016/j.surfcoat.2010.09.012 ↗
24. H.Y. Hsiao, C.M. Liu, H.W. Lin, T.C. Liu, C.L. Lu, Y.S. Huang, C. Chen, and K.N. Tu, Science 336, 6084 (2012).10.1126/science.1216511 ↗
25. A. Gusak and K.N. Tu, Phys. Rev. B Condens. Matter 66, 11 (2002).10.1103/PhysRevB.66.115403 ↗
26. J.F. Li, S.H. Mannan, M.P. Clode, D.C. Whalley, and D.A. Hutt, Acta Mater. 54, 11 (2006).10.1016/j.actamat.2005.08.033 ↗
27. X. Deng, G. Piotrowski, J.J. Williams, and N. Chawla, J. Electron. Mater. 32, 12 (2003).10.1007/s11664-003-0108-0 ↗
28. P. Jagtap, A. Chakraborty, P. Eisenlohr, and P. Kumar, (2017) Acta Mater. 134, 346 (2017).
29. P. Sarobol, W.H. Chen, A.E. Pedigo, P. Su, J.E. Blendell, and C.A. Handwerker, J. Mater. Res. 28, 5 (2013).
30. X. Deng, N. Chawla, K.K. Chawla, and M. Koopman, Acta Mater. 16, 52 (2004).
31. S. Jeong, N. Murata, Y. Sato, K. Suzuki, and H. Miura, Trans. Jpn. Inst. Electron. Packag. 2, 1 (2009).10.5104/jiepeng.2.1 ↗
32. K. Tanida, M. Umemoto, N. Tanaka, Y. Tomita, and K. Takahashi, Jpn. J. Appl. Phys. 43, 4S (2004).10.1143/JJAP.43.2264 ↗
33. K.E. Yazzie, J.J. Williams, and N. Chawla, J. Electron. Mater. 41, 9 (2012).10.1007/s11664-012-2180-9 ↗
34. S. Sawada, K. Shimizu, S. Shimada, and Y. Hattori, SEI Tech. Rev. 71 (2010).
35. P.F. Yang, Y.-S. Lai, S.-R. Jian, J. Chen, and R.-S. Chen, Mater. Sci. Eng. A 485, 305 (2008).10.1016/j.msea.2007.07.062 ↗
36. G.Y. Jang, J.W. Lee, and J.G. Duh, J. Electron. Mater. 33, 10 (2004).