Effect of Graphitic Carbon Nitride Nanosheets Addition on the Microstructure and Mechanical Properties of Sn-3.5Ag-0.5Cu Solder Alloy
Source abstract
Abstract
The microstructure and mechanical properties of Sn-3.5Ag-0.5Cu (SAC355) solder alloy reinforced with different amounts of graphitic carbon nitride nanosheets (GCNNs) are assessed. The as-synthesized GCNNs were examined by a scanning electron microscope and X-ray diffraction techniques. A set of composite solders were fabricated by adding GCNNs with different concentrations (0 wt.%, 0.25 wt.%, 0.5 wt.%, and 1.0 wt.%) to SAC355 solder alloy. After a solution heat treatment, samples were immediately aged at temperatures ranging from 343 K to 403 K for 2 h followed by water quenching at 273 K. The mechanical properties of the composite solders were assessed using the indentation hardness test. The experimental results showed that the minimum creep rate values estimated from hardness data increased progressively with increasing weight percentage of GCNNs and/or aging temperature. The homogeneous distribution of GCNNs in the composite solders allows microscopic defects such as cracks to develop throughout the solders leading to higher creep rate values. The calculated values of the stress exponent and the activation energy for the creep process indicated that the creep rate controlling process depends on dislocation core diffusion in the tin matrix.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. F.X. Che, W.H. Zhu, E.S.W. Poh, X.W. Zhangm, and R.X. Zhang, J. Alloys Compd. 507, 215 (2010).10.1016/j.jallcom.2010.07.160 ↗
2. A.K. Gain, Y.C. Chan, and W.K.C. Yung, Microelectron. Reliab. 51, 975 (2011).10.1016/j.microrel.2011.01.006 ↗
3. A.S.M.A. Haseeb, M.M. Arafat, and M.R. Johan, Mater. Charact. 64, 27 (2012).10.1016/j.matchar.2011.11.006 ↗
4. L.C. Tsao, J. Alloys Compd. 509, 8441 (2011).10.1016/j.jallcom.2011.05.116 ↗
5. A.A. El-Daly, G.S. Al-Ganainy, A. Fawzy, and M.J. Younis, Mater. Des. 55, 837 (2014).10.1016/j.matdes.2013.10.043 ↗
6. A. Fawzy, S.A. Fayek, M. Sobhy, E. Nassr, M.M. Mousa, and G. Saad, Mater. Sci. Eng. A 603, 1 (2014).10.1016/j.msea.2014.02.061 ↗
7. H. Ma and J.C. Suhling, J. Mater. Sci. 44, 1141 (2009).10.1007/s10853-008-3125-9 ↗
8. S.M. Abdelaziz, H.Y. Zahran, and A.F. Abd, El-Rehim. Int. J. Adv. Eng. Technol. 10, 73 (2017).
9. A. Fawzy, S.A. Fayek, M. Sobhy, E. Nassr, M.M. Mousa, and G. Saad, J. Mater. Sci. Mater. Electron. 24, 3210 (2013).10.1007/s10854-013-1230-2 ↗
10. J. Shen and Y.C. Chan, Microelectron. Reliab. 49, 223 (2009).10.1016/j.microrel.2008.10.004 ↗
11. A.K. Gain, T. Fouzder, Y.C. Chan, A. Sharif, N.B. Wong, and W.K.C. Yung, J. Alloys Compd. 506, 216 (2010).10.1016/j.jallcom.2010.06.180 ↗
12. S.Y. Chang, C.C. Jain, T.H. Chuang, L.P. Feng, and L.C. Tsao, Mater. Des. 32, 4720 (2011).10.1016/j.matdes.2011.06.044 ↗
13. A.A. El-Daly, A. Fawzy, S.F. Mansour, and M.J. Younis, J. Mater. Sci. Mater. Electron. 24, 2976 (2013).10.1007/s10854-013-1200-8 ↗
14. A.A. El-Daly, A. Fawzy, S.F. Mansour, and M.J. Younis, Mater. Sci. Eng. A 578, 62 (2013).10.1016/j.msea.2013.04.022 ↗
15. P. Liu, P. Yao, and J. Liu, J. Electron. Mater. 37, 874 (2008).10.1007/s11664-007-0366-3 ↗
16. Y. Tang, G.Y. Li, and Y.C. Pan, Mater. Des. 55, 574 (2014).10.1016/j.matdes.2013.10.033 ↗
17. L. Zhang, X.Y. Fan, Y.H. Guo, and C.W. He, Electron. Mater. Lett. 10, 645 (2014).10.1007/s13391-014-3190-y ↗
18. X.D. Liu, Y.D. Han, H.Y. Jing, J. Wei, and L.Y. Xu, Mater. Sci. Eng. A 562, 25 (2013).10.1016/j.msea.2012.10.079 ↗
19. N. Saud, M.A.A. Mohd Salleh, M.N. Derman, M.I.I. Ramli, and R.M. Said, Mater. Sci. Forum 819, 167 (2015).10.4028/www.scientific.net/MSF.819.167 ↗
20. H. Ma, J.C. Suhling, Y. Zhang Y, Lall P, and M.J. Bozack, in: Proceedings of the 57th IEEE Electronic Components and Technology Conference (2007) Reno, pp. 653–668.
21. Q. Xiao, L. Nguyen, and W.D. Armstrong, Aging and creep behavior of Sn3.9Ag0.6Cu solder alloy, in Electronic Components and Technology Conference, 54th Proceedings (2004) Las Vegas, pp. 1325–1332.
22. Q. Liang, Z. Li, Y. Bai, Z.-H. Huang, F. Kang, and Q.-H. Yang, Sci. China Mater. 60, 109 (2017).10.1007/s40843-016-5131-9 ↗
23. M. Yu, Y. Qu, K. Pan, G. Wang, and Y. Li, Sci. China Mater. 60, 228 (2017).10.1007/s40843-016-9006-4 ↗
24. J. Wang, Y. Shen, Y. Li, S. Liu, and Y. Zhang, Chem. Eur. J. 22, 12449 (2016).10.1002/chem.201602095 ↗
25. Y. Jia, S.J. Rhee, and C. Liu, Mater. Lett. 188, 338 (2017).10.1016/j.matlet.2016.11.116 ↗
26. N. Wang, Y. Zhou, C. Chen, L. Cheng, and H. Ding, Catal. Commun. 73, 74 (2016).10.1016/j.catcom.2015.10.015 ↗
27. Y. Ma, E. Liu, X. Hu, C. Tang, J. Wan, J. Li, and J. Fan, Appl. Surf. Sci. 358, 246 (2015).10.1016/j.apsusc.2015.08.174 ↗
28. L. Chen, D. Huang, S. Ren, T. Dong, Y. Chi, and G. Chen, Nanoscale 5, 225 (2013).10.1039/C2NR32248J ↗
29. X. Yuan, C. Zhou, Y. Jin, Q. Jing, Y. Yang, X. Shen, Q. Tang, Y. Mu, and A.K. Du, J. Colloid Interface Sci. 468, 211 (2016).10.1016/j.jcis.2016.01.048 ↗
30. D. Masih, Y. Ma, and S. Rohani, Appl. Catal. B Environ. 206, 556 (2017).10.1016/j.apcatb.2017.01.061 ↗
31. S.M. Aghdam, M. Haghighi, S. Allahyari, and L. Yosef, J. Photochem. Photobiol. A Chem. 338, 201 (2017).10.1016/j.jphotochem.2017.02.013 ↗
32. A.G. Atkins, The Science of Hardness Testing and Its Research Applications (Metal Park, OH: ASM, 1971), p. 223.
33. A.F. Abd, El-Rehim. J. Alloys Compd. 440, 127 (2007).10.1016/j.jallcom.2006.09.021 ↗
34. A.F. Abd El-Rehim and H.Y. Zahran, J. Alloys Compd. 695, 3666 (2017).10.1016/j.jallcom.2016.11.371 ↗
35. T. Chen and I. Dutta, J. Electron. Mater. 37, 347 (2008).10.1007/s11664-007-0340-0 ↗
36. S.L. Allen, M.R. Notis, R.R. Chromik, and R.P. Vinci, J. Mater. Res. 19, 1417 (2004).10.1557/JMR.2004.0190 ↗
37. S.L. Allen, M.R. Notis, R.R. Chromik, R.P. Vinci, D.J. Lewis, and R. Schaefer, J. Mater. Res. 19, 1425 (2004).10.1557/JMR.2004.0191 ↗
38. M. Sadiq, R. Pesci, and M. Cherkaoui, J. Electron. Mater. 42, 492 (2013).10.1007/s11664-012-2351-8 ↗
39. I. Dutta, P. Kumar, and G. Subbarayan, JOM 61, 29 (2009).10.1007/s11837-009-0085-8 ↗
40. A.F. Abd El-Rehim, H.Y. Zahran, and S. AlFaify, J. Mater. Eng. Perform. 27, 344 (2018).10.1007/s11665-017-3104-x ↗
41. B.O. Fatile, B.O. Adewuyi, and H.T. Owoyemi, Eng. Sci. Technol. Int. J. 20, 1147 (2017).10.1016/j.jestch.2017.01.001 ↗
42. P.M. Sargent and M.F. Ashby, Mater. Sci. Technol. 8, 594 (1992).10.1179/mst.1992.8.7.594 ↗
43. Y. Kanda and Y. Kariya, Microelectron. Reliab. 52, 1435 (2012).10.1016/j.microrel.2012.02.006 ↗
44. F. Abd El-Salam, L.A. Wahab, R.H. Nada, and H.Y. Zahran, J. Mater. Sci. 42, 3661 (2007).10.1007/s10853-006-1343-6 ↗
45. F. Abd El-Salam, H.Y. Zahran, and S.M. Abdelaziz, Int. J. New Technol. Res. 1, 1 (2015).
46. B.M. Kramer and P.K. Judd, J. Vac. Sci. Technol. A 3, 2439 (1985).10.1116/1.572854 ↗
47. F. Deng, L. Zhao, X. Pei, X. Luo, and S. Luo, Mater. Chem. Phys. 189, 169 (2017).10.1016/j.matchemphys.2016.12.028 ↗
48. K.S. Kim, S.H. Huh, and K. Suganuma, J. Alloys Compd. 352, 226 (2003).10.1016/S0925-8388(02)01166-0 ↗
49. J. Thambi, A. Schiessl, M. Waltz, K.-D. Lang, and U. Tetzlaff, J. Electron. Packag. 139, 030802 (2017).10.1115/1.4035850 ↗
50. Z. Chen, Y. Shi, and Z. Xia, J. Electron. Mater. 33, 964 (2004).10.1007/s11664-004-0023-z ↗
51. H.G. Song, J.W. Morris Jr., and F. Hua, Mater. Trans. 43, 1847 (2002).10.2320/matertrans.43.1847 ↗
52. A. Kanjilal, V. Jangid, and P. Kumar, Mater. Sci. Eng. A 703, 144 (2017).10.1016/j.msea.2017.07.061 ↗
53. R.S. Sidhu, X. Deng, and N. Chawla, Metall. Mater. Trans. A 39, 349 (2008).10.1007/s11661-007-9412-2 ↗