Validation, Optimization and Simulation of a Solar Thermoelectric Generator Model
Source abstract
Abstract
This study explores thermoelectrics as a viable option for small-scale solar thermal applications. Thermoelectric technology is based on the Seebeck effect, which states that a voltage is induced when a temperature gradient is applied to the junctions of two differing materials. This research proposes to analyze, validate, simulate, and optimize a prototype solar thermoelectric generator (STEG) model in order to increase efficiency. The intent is to further develop STEGs as a viable and productive energy source that limits pollution and reduces the cost of energy production. An empirical study (Kraemer et al. in Nat Mater 10:532, 2011) on the solar thermoelectric generator reported a high efficiency performance of 4.6%. The system had a vacuum glass enclosure, a flat panel (absorber), thermoelectric generator and water circulation for the cold side. The theoretical and numerical approach of this current study validated the experimental results from Kraemer’s study to a high degree. The numerical simulation process utilizes a two-stage approach in ANSYS software for Fluent and Thermal-Electric Systems. The solar load model technique uses solar radiation under AM 1.5G conditions in Fluent. This analytical model applies Dr. Ho Sung Lee’s theory of optimal design to improve the performance of the STEG system by using dimensionless parameters. Applying this theory, using two cover glasses and radiation shields, the STEG model can achieve a highest efficiency of 7%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies · Heat Transfer and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. J.A. Duffie and W.A. Beckman, Solar Engineering of Thermal Processes (Chichester: Wiley, 2013).10.1002/9781118671603 ↗
2. B. Sørensen, Renewable Energy Conversion, Transmission, and Storage (Boston: Elsevier, 2007).
3. F.P. Incropera and F.P. Incropera, Fundamentals of Heat and Mass Transfer (Hoboken: Wiley, 2007).
4. H.S. Lee, Thermoelectrics: Design and Materials (Chichester: Wiley, 2017).
5. J. Song, Y. Wang, and J. Tang, Scientific Reports 6 (2016).10.1038/srep33315 ↗
6. M. Telkes, J. Appl. Phys. 25, 765 (1954).10.1063/1.1721728 ↗
7. H. Goldsmid, J. Giutronich, and M. Kaila, Sol. Energy 24, 435 (1980).10.1016/0038-092X(80)90311-4 ↗
8. D. Kraemer, B. Poudel, H.-P. Feng, J.C. Caylor, B. Yu, X. Yan, Y. Ma, X. Wang, D. Wang, A. Muto, K. Mcenaney, M. Chiesa, Z. Ren, and G. Chen, Nat. Mater. 10, 532 (2011).10.1038/nmat3013 ↗
9. D. Kraemer, K. Mcenaney, M. Chiesa, and G. Chen, Sol. Energy 86, 1338 (2012).10.1016/j.solener.2012.01.025 ↗
10. D. Kraemer, Q. Jie, K. Mcenaney, F. Cao, W. Liu, L.A. Weinstein, J. Loomis, Z. Ren, and G. Chen, Nat. Energy 1, 16153 (2016).10.1038/nenergy.2016.153 ↗
11. L.L. Baranowski, G.J. Snyder, and E.S. Toberer, Energy Environ. Sci. 5, 9055 (2012).10.1039/c2ee22248e ↗
12. W.H. Chen, C.C. Wang, C.I. Hung, C.C. Yang, and R.C. Juang, Energy 71, 40 (2014).10.1016/j.energy.2014.03.117 ↗
13. S. Su and J. Chen, IEEE Trans. Ind. Electron. 61, 6844 (2014).10.1109/TIE.2014.2320219 ↗
14. Y. Nakasone, T.A. Stolarski, and S. Yoshimoto, Engineering Analysis with ANSYS Software (Oxford: Butterworth-Heinemann, 2008).