journal article·2017-12

Investigation of the Structure, Optical and Electrical Properties of Lithium Perchlorate Doped Polyaniline Composite: Aloe Vera Used as a Bio-Plasticizer

L. Yesappa, M. Niranjana, S. P. Ashokkumar, H. Vijeth, Chapi Sharanappa, S. Raghu, H. Devendrappa

Journal of Electronic Materials· Volume 46· Issue 12
Publisher page

Abstract

Bio-plasticizer based polyaniline (PANI)/lithium perchlorate (LiClO4) composites were synthesized by the facile in situ method. The composites were characterized using the Fourier transform infrared spectroscopy (FT-IR) to identify the chemical interactions. A band appeared at 1502 cm−1 due to the presence of the –H2CO– group and CH2 scissor mode vibration for the PAL15% composite. This considerable change in the morphology of LiClO4 homogeneous dispersion in a PANI matrix was investigated by scanning electron microscopy (SEM). The UV–Visible absorption (UV–Vis) showed 300–400 nm attributed to the π–π* transition and exhibited a red shift from 535 nm to 617 nm in the visible region, indicating a decrease in band gap. The variations in dielectric constant with the addition of lithium perchlorate (LiClO4) at different temperatures and in the frequency range of 20 Hz–1 MHz were assessed through impedance analysis. The temperature dependent electrical conductivity increased with increasing temperature as well as dopant concentration. High conductivity of 1.41 × 10−3 S/cm corresponding to activation energy of 0.02 eV and 2.95 eV optical band gap for 15 wt.% of LiClO4 concentration was observed. The cyclic voltammetry measurement revealed a typical rectangular shape of the integral area, suggesting that the composite has strong electrochemical strength and is a possible candidate for electrochemical super capacitor and solar cell applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials · Analytical Chemistry and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. F. Gmati, A. Fattoum, A. Manaiil, and A.B. Mohamed, J. Phys. D Appl. Phys. 44, 315405 (2011).10.1088/0022-3727/44/31/315405 ↗
2. S. Cho, K.H. Shin, and J. Jang, ACS Appl. Mater. Interface 5, 9186 (2013).10.1021/am402702y ↗
3. J.C. Chiang and A.G. MacDiarmid, Synth. Met. 13, 193 (1986).10.1016/0379-6779(86)90070-6 ↗
4. E.T. Kang, K.G. Neoh, and K.L. Tan, Prog. Polym. Sci. 23, 277 (1998).10.1016/S0079-6700(97)00030-0 ↗
5. J.Y. Shimano and A.G. MacDiarmid, Synth. Met. 123, 251 (2001).10.1016/S0379-6779(01)00293-4 ↗
6. Y.M. Xiao, J.Y. Lin, J.H. Wu, S.Y. Tai, G.T. Yue, and T.W. Lin, J. Power Source 233, 320 (2013).10.1016/j.jpowsour.2013.01.116 ↗
7. D.M. DeLongchamp and P.T. Hammond, Chem. Mater. 16, 4799 (2004).10.1021/cm0496624 ↗
8. J.W. Jeon, S.R. Kwon, F. Li, J.L. Lutkenhaus, and A.C.S. Appl, Mater. Interf. 7, 24150 (2015).10.1021/acsami.5b07459 ↗
9. K.S. Ryu, K.M. Kim, S.G. Kang, G.J. Lee, J. Joo, and S.H. Chang, Synth. Met. 110, 213 (2000).10.1016/S0379-6779(99)00288-X ↗
10. K. Dutta, J. Appl. Phy. 101, 093711 (2007).10.1063/1.2724824 ↗
11. I.M. Arafa, H.M.E. Ghanem, and K.A. Bani-Doumi, J. Inorg. Organomet. Polym. 23, 365 (2013).10.1007/s10904-012-9785-6 ↗
12. K. Pandey, N. Asthana, S.S. Sanjay, and M.M. Dwivedi, Eur. J. Adv. Eng. Technol. 3, 21 (2016).
13. M.J.D. Silva, A.O. Sanches, L.F. Malmonge, and J.A. Malmonge, Mater. Res. 17, 59 (2014).10.1590/S1516-14392014005000065 ↗
14. U.A. Sevil, E. Coşkun, and O. Güven, Rad. Phys. Chem. 94, 45 (2014).10.1016/j.radphyschem.2013.07.029 ↗
15. V. Mini, A. Kamath, S. Raghu, C. Sharanappa, and H. Devendrappa, Ind. Eng. Chem. Res. 53, 16873 (2014).10.1021/ie502922b ↗
16. J. Manuel, J.K. Kim, A. Matic, P. Jacobsson, G.S. Chauhan, J.K. Ha, K.K. Cho, and J.H. Ahn, Mater. Res. Bull. 47, 2815 (2012).10.1016/j.materresbull.2012.04.053 ↗
17. S.K. Shukla, M.A. Vamaksh, S.Aparna Bharadavaja, and T. Ashutosh, Adv. Mater. Lett. 3, 421 (2012).10.5185/amlett.2012.5349 ↗
18. D. Zhou, R. Zhou, C. Chen, W.A. Yee, J. Kong, G. Ding, and X. Lu, J. Phys. Chem. B 117, 7783 (2013).10.1021/jp4021678 ↗
19. P. Saini, V. Choudhary, N. Vijayan, and R.K. Kotnala, J. Phys. Chem. C 116, 13403 (2012).10.1021/jp302131w ↗
20. D. Saikia and A. Kumara, J. Appl. Phys. 98, 043514 (2005).10.1063/1.2030417 ↗
21. A.H. Elsayed, M.S. Mohy Eldin, A.M. Elsyed, A.H. Abo Elazm, E.M. Younes, and H.A. Motaweh, Int. J. Electrochem. Sci. 6, 206 (2011).10.1016/S1452-3981(23)14987-X ↗
22. S.B. Kondawar, S.R. Thakare, V. Khati, and S. Bompilwar, J. Modern Phys. B 23, 3297 (2009).10.1142/S0217979209052583 ↗
23. L.I. Nadaf and K.S. Venkatesh, Int. J. Electrochem. Sci. 6, (2011).
24. M. Khalid, M.A. Tumelero, I.S. Brandt, V.C. Zoldan, J.J.S. Acuña, and A.A. Pasa, Indian J. Mater. Sci. 718304, 1 (2013).
25. A.B. Puthirath, B. John, C. Gouri, and S. Jayalekshmi, RSC Adv. 00, 1 (2012).
26. P.P.N. Vijay Kumar, U. Shameem, P. Kollu, R.L. Kalyani, and S.V.N. Pammi, BioNanoSci. 5, 135 (2015).10.1007/s12668-015-0171-z ↗
27. M.V. Kulkarni and B.B. Kale, Sens. Actuator B-Chem. 187, 407 (2013).10.1016/j.snb.2012.12.106 ↗
28. S.A. Chen and L.C. Lin, Macromolecules 28, 1239 (1996).10.1021/ma00108a062 ↗
29. W.M. Bandaranayake, Nat. Prod. Rep. 23, 223 (2006).10.1039/b307612c ↗
30. E. Alveroglu, J. Molec. Str. 10, 86 (2015).10.1016/j.molstruc.2015.01.006 ↗
31. N. Su, Polymers 7, 1599 (2015).10.3390/polym7091473 ↗
32. S. Chapi and S. Raghu, H. Devendrappa 22, 803 (2016).
33. C. Sharanappa, and H. Devendrappa, J. Res. Updates in Pol. Sci. 3, (2015).10.6000/1929-5995.2014.03.04.2 ↗
34. S. Chapi, S. Raghu, V. Mini, K. Archana, and S. Thomas, Macromol. Symp. 361, 129 (2016).10.1002/masy.201400272 ↗
35. C. Basavaraja, R. Pierson, and D.S. Huh, Appl. Polm. Sci. 275, 82 (2008).
36. I.L. Hosier, L. Cozzarini, A.S. Vanghan, and S.G. Swingler, J. Phys: Conf. Ser. 183, 1 (2009).
37. R. Asmatulu, B. Geist, W.B. Spillman, and R.O. Claus, Smart Mater. Struct. 14, 1493 (2005).10.1088/0964-1726/14/6/041 ↗
38. J. Jiang and L.H. Ai, Phys. B 405, 263 (2010).10.1016/j.physb.2009.08.071 ↗
39. P. Basak and S.V. Manorama, J. Phys. Chem. B 109, 1174 (2005).10.1021/jp0460792 ↗
40. M. Niranjana, L. Yesappa, S.P. Ashokkumar, H. Vijeth, S. Raghu, and H. Devendrappa, RSC Adv. 6, 115074 (2016).10.1039/C6RA24137A ↗
41. H. Devendrappa, U.V. Subba Rao, and M.V.N. Ambika Prasad, J. Power Source 155, 368 (2006).10.1016/j.jpowsour.2005.05.014 ↗
42. Z.H. Khani, M.M. Malik, M. Zulfequar, and M. Husain, J. Phys. Conden. Mat. 7, 8979 (1995).10.1088/0953-8984/7/47/017 ↗
43. A. Chandra, R.C. Agrawal, and Y.K. Mahipal, J. Phys. D Appl. Phys. 42, 135107 (2009).10.1088/0022-3727/42/13/135107 ↗
44. M.L. Verma and H.D. Sahu, Ionics 21, 3223 (2015).10.1007/s11581-015-1517-9 ↗
45. S. Chandra, S.A. Hashmi, M. Saleem, and R.C. Agrawal, Solid State Ion. 67, 1 (1993).10.1016/0167-2738(93)90301-I ↗
46. A. Malinauskas and R. Holze, Synth. Met. 97, 31 (1998).10.1016/S0379-6779(98)00106-4 ↗
47. B.R. Saunders, K.S. Murray, and R. Fleming, J. Synth. Met. 47, 167 (1992).10.1016/0379-6779(92)90384-U ↗
48. H. Lin, L. Li, J. Ren, Z. Cai, L. Qiu, Z. Yang, and H. Peng, Langmuir Nat. Sci. Rep. 3, 1353 (2013).