journal article·2017-08

Evaluation of Detachable Ga-Based Solder Contacts for Thermoelectric Materials

H. Kolb, R. Sottong, T. Dasgupta, E. Mueller, J. de Boor

Journal of Electronic Materials· Volume 46· Issue 8
Publisher page

Abstract

Low electrical and thermal contact resistances are a prerequisite for highly efficient thermoelectric generators. Likewise, certain measurement setups for characterization of thermoelectric materials rely on good-quality contacts between sample and setup. Detachable contacts are an interesting alternative to permanent contacting solutions due to ease of handling and nondestructive disassembly of valuable samples. Therefore, the applicability of gallium-based liquid metal solder as detachable contact material was studied, particularly with regard to compatibility of the solder with state-of-the-art thermoelectric materials CoSb3, Mg2Si, and FeSi2. Tungsten, nickel, chromium, and titanium were tested as protective coatings between the thermoelectric material and liquid metal solder. Electrical measurements showed that some materials form excellent and stable contacts with the solder for a limited temperature range. At higher temperatures, application of a protective layer was found to be necessary for all investigated materials. Tungsten and nickel showed promising results as protective layer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Electronic Packaging and Soldering Technologies · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. P. Ziolkowski, P. Poinas, J. Leszczynski, G. Karpinski, and E. Müller, J. Electron. Mater. 39, 1934 (2010).10.1007/s11664-009-1048-0 ↗
2. F.P. Brito, L. Figueiredo, L.A. Rocha, A.P. Cruz, L.M. Goncalves, J. Martins, and M.J. Hall, J. Electron. Mater. 45, 1711 (2015).10.1007/s11664-015-4182-x ↗
3. D. Ebling, K. Bartholomé, M. Bartel, and M. Jägle, J. Electron. Mater. 39, 1376 (2010).10.1007/s11664-010-1331-0 ↗
4. J. Fan, L. Chen, S. Bai, and X. Shi, Mater. Lett. 58, 3876 (2004).10.1016/j.matlet.2004.07.041 ↗
5. J. García-Cañadas and G. Min, AIP Conf. Proc. 1449, 454 (2012).10.1063/1.4731594 ↗
6. A. Muto, D. Kraemer, Q. Hao, Z.F. Ren, and G. Chen, Rev. Sci. Instrum. 80, 093901 (2009).10.1063/1.3212668 ↗
7. H. Iwasaki, T. Yamamoto, H. Kim, and G. Nakamoto, J. Electron. Mater. 42, 1840 (2013).10.1007/s11664-012-2448-0 ↗
8. J. Martin, T. Tritt, and C. Uher, J. Appl. Phys. 108, 121101 (2010).10.1063/1.3503505 ↗
9. R. Amatya, P.M. Mayer, and R.J. Ram, Rev. Sci. Instrum. 83, 075107 (2012).10.1063/1.4731650 ↗
10. D. Kraemer and G. Chen, Rev. Sci. Instrum. 85, 025108 (2014).10.1063/1.4865111 ↗
11. L.I. Anatychuk and V.V. Lysko, J. Electron. Mater. 43, 3863 (2014).10.1007/s11664-014-3300-5 ↗
12. A. Miner and U. Ghoshal, Appl. Phys. Lett. 85, 506 (2004).10.1063/1.1772862 ↗
13. M. Kun-Quan and L. Jing, J. Phys. D Appl. Phys. 40, 4722 (2007).10.1088/0022-3727/40/15/055 ↗
14. P. Sen and C.J. Kim, IEEE Trans. Ind. Electron. 56, 1314 (2009).10.1109/TIE.2008.2006954 ↗
15. R.C. Chiechi, E.A. Weiss, M.D. Dickey, and G.M. Whitesides, Angew. Chem. Int. Ed. 47, 142 (2008).10.1002/anie.200703642 ↗
16. P. Surmann and H. Zeyat, Anal. Bioanal. Chem. 383, 1009 (2005).10.1007/s00216-005-0069-7 ↗
17. N.B. Morley, J. Burris, L.C. Cadwallader, and M.D. Nornberg, Rev. Sci. Instrum. 79, 056107 (2008).10.1063/1.2930813 ↗
18. L.C. Cadwallader, Presented at the Conference: Energy Facility Contractors Group (EFCOG) Safety Analysis Working Group (SAWG) 2003 Annual Meeting, Salt Lake City, UT (US), 06/21/2003–06/27/2003; Other Information: PBD: 7 May 2003, 2003 (unpublished).
19. F. Barbier and J. Blanc, J. Mater. Res. 14, 737 (1999).10.1557/JMR.1999.0099 ↗
20. V.Y. Prokhorenko, V.V. Roshchupkin, M.A. Pokrasin, S.V. Prokhorenko, and V.V. Kotov, High Temp. 38, 954 (2000).10.1023/A:1004157827093 ↗
21. H. Kolb, T. Dasgupta, K. Zabrocki, E. Mueller, and J. de Boor, Rev. Sci. Instrum. 86, 073901 (2015).10.1063/1.4926404 ↗
22. A. Schmitz, C. Schmid, J. de Boor, C. Stiewe, and E. Müller, Mater. Today Proc. 2, 705 (2015).10.1016/j.matpr.2015.05.101 ↗
23. J. de Boor, C. Compere, T. Dasgupta, C. Stiewe, H. Kolb, A. Schmitz, and E. Mueller, J. Mater. Sci. 49, 3196 (2014).10.1007/s10853-014-8023-8 ↗
24. P. Ziolkowski, C. Stiewe, J. de Boor, I. Druschke, K. Zabrocki, F. Edler, S. Haupt, J. König, and E. Mueller, J. Electron. Mater. 46, 51 (2017).10.1007/s11664-016-4850-5 ↗
25. J. de Boor, C. Stiewe, P. Ziolkowski, T. Dasgupta, G. Karpinski, E. Lenz, F. Edler, and E. Mueller, J. Electron. Mater. 42, 1711 (2013).10.1007/s11664-012-2404-z ↗
26. J. de Boor, C. Gloanec, H. Kolb, R. Sottong, P. Ziolkowski, and E. Müller, J. Alloys Compd. 632, 348 (2015).10.1016/j.jallcom.2015.01.149 ↗
27. T. Sakamoto, Y. Taguchi, T. Kutsuwa, K. Ichimi, S. Kasatani, and M. Inada, J. Electron. Mater. 45, 1321 (2015).10.1007/s11664-015-4022-z ↗
28. D. Zhao, M. Zuo, Z. Wang, X. Teng, and H. Geng, Appl. Surf. Sci. 305, 86 (2014).10.1016/j.apsusc.2014.02.173 ↗
29. D.E. Newbury and N.W.M. Ritchie, J. Mater. Sci. 50, 493 (2015).10.1007/s10853-014-8685-2 ↗
30. K. Nogi, T. Kita, and X.Q. Yan, Mater. Sci. Eng. A 307, 129 (2001).10.1016/S0921-5093(00)01949-3 ↗
31. T. Caillat, A. Borshchevsky, and J.P. Fleurial, AIP Conf. Proc. 301, 517 (1994).10.1063/1.2950224 ↗
32. P.W.T.S. Hidnert, Scientific Papers of the Bureau of Standards 20, 483 (1925).10.6028/nbsscipaper.203 ↗
33. J.S. Przybyszewski, NASA TN D-6184, 1–21 (1971).
34. T.A. Lobova and T.A. Syrvacheva, SOV Powder Metall. 22, 321 (1983).10.1007/BF00795614 ↗
35. H. Okamoto, J. Phase Equilib. 23, 457 (2002).10.1361/105497102770331505 ↗
36. J.L. Murray, Bull. Alloy Phase Diagr. 6, 327 (1985).10.1007/BF02880510 ↗