Micro-structure, Mechanical Properties and Dielectric Properties of Bisphenol A Allyl Compound-Bismaleimide Modified by Super-Critical Silica and Polyethersulfone Composite
Source abstract
Abstract
Bisphenol A allyl compound-bismaleimide (MBAE) composite modified by SCE-SiO2 and polyethersulfone (PES) resin has been prepared and researched. SCE-SiO2 was modified by super-critical ethanol and PES thermoplastic resin used as modifiers. The composite was prepared via the hot melting method. The FT-IR measurements indicated that ethanol molecular had adsorbed on the nano-SiO2 surface. SEM images showed that the composite had a multiphase structure, PES and SCE-SiO2 existed as a dispersed phase, and the interaction of the three phases affected each other, such that the bending fracture behavior transformed from brittle fracture to ductile fracture, and the modifiers of SCE-SiO2 and PES resin could improve the mechanical properties. The impact and the bending strength of the composite was 16.5 kJ/mm2 and 150.4 MPa, improved by 68.3% and 56.7% compared with those of the MBAE matrix, respectively, when the content of SCE-SiO2 was 2 wt.% and PES 5 wt.%. The dielectric constant (e) of the composites was less than 3.9 and decreased with increasing frequency, and the dielectric loss was less than 9 × 10−3 for frequencies between 102 Hz and 105 Hz. These properties could meet the requirement of insulating material.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Synthesis and properties of polymers · Epoxy Resin Curing Processes · Silicone and Siloxane Chemistry
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. T. Takeichi, S. Uchida, Y. Inoue, T. Kawauchi, and N. Furukawa, High Perform. Polym. 26, 265 (2014).10.1177/0954008313510958 ↗
2. M. Shibata, K. Satoh, and S. Ehara, J. Appl. Polym. Sci. (2016). doi: 10.1002/APP.43121 .10.1002/APP.43121 ↗
3. L.L. Xia, Y. Xu, K.X. Wang, and P. Chen, Polym. Adv. Technol. 26, 266 (2015).10.1002/pat.3452 ↗
4. X.H. Xu, X.Q. Wang, W.P. Liu, X. Zhang, Z.Z. Li, and S.Y. Du, Mater. Design 97, 316 (2016).10.1016/j.matdes.2016.02.093 ↗
5. X.L. Zeng, S.H. Yu, M.B. Lai, R. Sun, and C.P. Wong, Sci. Technol. Adv. Mater. 14, 6 (2013).
6. Y.F. Chen, Q.W. Dai, X.W. Zhang, and T. Feng, J. Nano Mater. (2014). doi: 10.1155/2014/356273 .10.1155/2014/356273 ↗
7. K. Naito, J.M. Yang, and Y. Kagawa, Mater. Sci. Eng. A 530, 357 (2014).10.1016/j.msea.2011.09.096 ↗
8. Y.F. Chen, Q.W. Dai, J.Y. Tan, and Q.Y. Zhang, Optoelectron. Adv. Mater. 8, 9–10 (2014).
9. A. Poulia, P.M. Sakkas, D.G. Kanellopoulou, G. Sourkouni, C. Legros, and C. Argirusis, Ultrason. Sonochem. 31, 417 (2016).10.1016/j.ultsonch.2016.01.031 ↗
10. Y.S. Zhou, J.R. Yu, X.X. Wang, Y. Wang, J. Zhu, and Z.M. Hu, Fibers Polym. 16, 1772 (2015).10.1007/s12221-015-5284-z ↗
11. F. You, G.S. Chen, J.J. Zou, Z. Yang, and S.Y. Gou, J. Appl. Polym. Sci. 123, 1833 (2012).10.1002/app.34662 ↗
12. M. Mohandas, C. Ayyavu, and A. Muthukaruppan, Polym. Plast. Technol. 53, 978 (2014).10.1080/03602559.2014.886040 ↗
13. Y. Jia, H.X. Yan, L. Ma, and J.P. Zhang, J. Polym. Res. 21, 499 (2014).10.1007/s10965-014-0499-z ↗
14. X.X. Chen, A.J. Gu, G.Z. Liang, L. Yuan, D.X. Zhuo, and J.T. Hu, Polym. Degrad. Stab. 97, 698 (2012).10.1016/j.polymdegradstab.2012.02.013 ↗
15. Y. Chen, W. Yue, Z. Bian, Y. Fan, and Q. Lei, Iran. Polym. J. 22, 377 (2013).10.1007/s13726-013-0137-3 ↗