journal article·2017-02

Silver Adhesive Layer for Enhanced Pressure-Free Bonding Using Copper Nanoparticles

Toshikazu Satoh, Toshitaka Ishizaki, Kunio Akedo

Journal of Electronic Materials· Volume 46· Issue 2
Publisher page

Abstract

Pressure-free Cu nanoparticle bonding between two Cu plates with an Ag adhesive layer was examined. Insertion of the Ag adhesive layer considerably enhanced the bonding strength at firing temperatures between 523 K and 673 K. The bonding strength generally increased with the firing temperature. The strength enhancement of the Ag adhesive layer was observed even for a very thin (3 nm) Ag layer, and there was no obvious dependence of the thickness of the Ag layer on the bonding strength for Ag layers of thickness up to 200 nm. Ag atoms from the adhesive layer diffused away to the bonding layer with an increase in the firing temperature. The elemental mapping images showed that the Ag had two morphologies: thin Ag layers existing between particulate Cu grains, and fine Ag particles dispersed in coarse Cu crystals. The microstructure near the interface between the Cu nanoparticle bonding layer and Cu plate used as the substrate suggests that the enhancement effect of the Ag layer originates in the active migration of the Ag layer itself.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Nanomaterials and Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. P.G. Neudeck, R.S. Okojie, and L.Y. Chen, Proc. IEEE 90, 1065 (2002).10.1109/JPROC.2002.1021571 ↗
2. H.S. Chin, K.Y. Cheong, and A.B. Ismail, Metall. Mater. Trans. B 41, 824 (2010).10.1007/s11663-010-9365-5 ↗
3. K. Suganuma, S.J. Kim, and K.S. Kim, JOM 61, 64 (2009).10.1007/s11837-009-0013-y ↗
4. X. Chen, M. Li, X.X. Ren, A.M. Hu, and D.L. Mao, J. Electron. Mater. 35, 1734 (2006).10.1007/s11664-006-0227-5 ↗
5. J.Y. Tsai, C.W. Chang, C.E. Ho, Y.L. Lin, and C.R. Kao, J. Electron. Mater. 35, 65 (2006).10.1007/s11664-006-0185-y ↗
6. F. Lang, H. Yamaguchi, H. Ohashi, and H. Sato, J. Electron. Mater. 40, 1563 (2011).10.1007/s11664-011-1661-6 ↗
7. N.S. Bosco and F.W. Zok, Acta Mater. 52, 2965 (2004).10.1016/j.actamat.2004.02.043 ↗
8. M.S. Park, S.L. Gibbons, and R. Arroyave, Acta Mater. 60, 6278 (2012).10.1016/j.actamat.2012.07.063 ↗
9. S.W. Yoon, M.D. Glover, and K. Shiozaki, IEEE Trans. Power Electron. 28, 2448 (2013).10.1109/TPEL.2012.2212211 ↗
10. P.O. Quintero and F.P. McCluskey, IEEE Trans. Device Mater. Reliab. 11, 531 (2011).10.1109/TDMR.2011.2140114 ↗
11. T.G. Lei, J.N. Calata, G.-Q. Lu, X. Chen, and S. Luo, IEEE Trans. Compon. Packag. Technol. 33, 98 (2010).10.1109/TCAPT.2009.2021256 ↗
12. K.S. Siow, J. Alloys Compd. 514, 6 (2012).10.1016/j.jallcom.2011.10.092 ↗
13. K.S. Siow, J. Electron. Mater. 43, 947 (2014).10.1007/s11664-013-2967-3 ↗
14. T. Morita, E. Ide, Y. Yasuda, A. Hirose, and K.F. Kobayashi, Jpn. J. Appl. Phys. 47, 6615 (2008).10.1143/JJAP.47.6615 ↗
15. E. Ide, S. Angata, A. Hirose, and K.F. Kobayashi, Acta Mater. 53, 2385 (2005).10.1016/j.actamat.2005.01.047 ↗
16. H. Ogura, M. Maruyama, R. Matsubayashi, T. Ogawa, S. Nakamura, T. Komatsu, H. Nagasawa, A. Ichimura, and S. Isoda, J. Electron. Mater. 39, 1233 (2010).10.1007/s11664-010-1236-y ↗
17. Y. Kobayashi, T. Shirochi, Y. Yasuda, and T. Morita, Int. J. Adhes. Adhes. 33, 50 (2012).10.1016/j.ijadhadh.2011.11.002 ↗
18. Y. Morisada, T. Nagaoka, M. Fukusumi, Y. Kashiwagi, M. Yamamoto, and M. Nakamoto, J. Electron. Mater. 39, 1283 (2010).10.1007/s11664-010-1195-3 ↗
19. T. Ishizaki and R. Watanabe, J. Mater. Chem. 22, 25198 (2012).10.1039/c2jm34954j ↗
20. T. Ishizaki, T. Satoh, A. Kuno, A. Tane, M. Yanase, F. Osawa, and Y. Yamada, Microelectron. Reliab. 53, 1543 (2013).10.1016/j.microrel.2013.07.042 ↗
21. T. Ishizaki, A. Kuno, T. Tane, M. Yanase, F. Osawa, T. Satoh, and Y. Yamada, Microelectron. Reliab. 54, 1867 (2014).10.1016/j.microrel.2014.07.113 ↗
22. T. Ishizaki, M. Usui, and Y. Yamada, Microelectron. Reliab. 55, 1861 (2015).10.1016/j.microrel.2015.07.039 ↗
23. T. Ishizaki, K. Akedo, T. Satoh, and R. Watanabe, J. Electron. Mater. 43, 774 (2014).10.1007/s11664-013-2953-9 ↗
24. R. Watanabe and T. Ishizaki, J. Mater. Chem. C 2, 3542 (2014).10.1039/c4tc00240g ↗
25. R. Watanabe and T. Ishizaki, Part. Part. Syst. Charact. 31, 699 (2014).10.1002/ppsc.201300273 ↗
26. T. Satoh and T. Ishizaki, J. Alloys Compd. 629, 118 (2015).10.1016/j.jallcom.2014.12.224 ↗
27. T. Ishizaki and R. Watanabe, J. Electron. Mater. 43, 4413 (2014).10.1007/s11664-014-3368-y ↗
28. C. Oh, S. Nagao, and K. Suganuma, J. Electron. Mater. 43, 4406 (2014).10.1007/s11664-014-3355-3 ↗
29. P. Peng, A. Hu, B. Zhao, A.P. Gerlich, and Y.N. Zhou, J. Mater. Sci. 47, 6801 (2012).10.1007/s10853-012-6624-7 ↗
30. Y. Morisada, T. Nagaoka, M. Fukusumi, Y. Kashiwagi, M. Yamamoto, M. Nakamoto, H. Kakiuchi, and Y. Yoshida, J. Electron. Mater. 40, 2398 (2011).10.1007/s11664-011-1750-6 ↗
31. K. Suganuma, S. Sakamoto, N. Kagami, D. Wakuda, K.S. Kim, and M. Nogi, Microelectron. Reliab. 52, 375 (2012).10.1016/j.microrel.2011.07.088 ↗
32. T. Satoh, K. Akedo, and T. Ishizaki, J. Alloys Compd. 582, 403 (2014).10.1016/j.jallcom.2013.08.042 ↗
33. M. Yeadon, J.C. Young, R.S. Averback, and J.W. Bullard, Nanostruct. Mater. 10, 731 (1998).10.1016/S0965-9773(98)00111-1 ↗
34. H. Mehrer, N. Stolica, and N.A. Stolwijk, Diffusion in Solid Metals and Alloys, Landolt-Börnstein---Group III Condensed Matter, vol. 26, ed. H. Mehrer (Springer, 1990).
35. A.D. LeClaire and G. Neumann, Diffusion in Solid Metals and Alloys, Landolt-Börnstein---Group III Condensed Matter, vol. 26, ed. H. Mehrer (Springer, 1990).
36. D.B. Butrymowicz, J.R. Manning, and M.E. Read, J. Phys. Chem. Ref. Data 3, 527 (1974).10.1063/1.3253145 ↗
37. J.L. Murray, Metall. Trans. A 15, 261 (1984)10.1007/BF02645110 ↗
38. H. Bakker, Diffusion in Solid Metals and Alloys, Landolt-Börnstein---Group III Condensed Matter, vol. 26, ed. H. Mehrer (Springer, 1990).