journal article·2017-01

Structures and Properties of C-Doped NiCr Thin Film Deposited by Closed-Field Unbalanced Magnetron Sputtering

Lifei Lai, Jinxia Wang, Hongtao Wang, Mingdong Bao

Journal of Electronic Materials· Volume 46· Issue 1
Publisher page

Abstract

The structures and properties of C-doped NiCr thin film as embedded thin film resistor (ETFR) materials were studied by closed-field, unbalanced magnetron sputtering method. The C-doped NiCr (NiCrC1) thin film had more stable electrical performance, better corrosion resistance, and higher hardness than NiCr thin film. The temperature coefficient of resistance (TCR) of NiCrC1 thin film deposited at room temperature (from 19.73 ppm/K to 173.7 ppm/K) was lower than that of NiCr thin film (from 157.8 ppm/K to 378.9 ppm/K), and the sheet resistor (154.25 Ω/Sq) was higher than that of NiCr thin film (62.84 Ω/Sq). The preferred orientations of C-doped NiCr thin film was Ni (111), while that of NiCr thin film was Ni (011). The carbon-doped NiCr thin film can reduce the defects and stress and change the preferred orientations. The dominant carbon in C-doped NiCr thin film had a graphite-like structure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. G. Min, Synth. Met. 153, 49 (2005).10.1016/j.synthmet.2005.07.256 ↗
2. J. Miller, Print. Circuit Des. Manuf. 22, 36 (2005).
3. P. Sandborn and P.A. Sandborn, IEEE Trans. Adv. Packag. 31, 76 (2008).10.1109/TADVP.2007.908030 ↗
4. L. Marcanti and J. Dougherty, Circuits Assem. 12, 28 (2001).
5. M. Oppermann, E. Feurer, and B. Holl, in MCM ‘94 Proceedings (1994), p. 279.
6. G.Y. Zhou, W. He, S.X. Wang, C.Y. Chen, and C.P. Wong, Mater. Lett. 108, 75 (2013).10.1016/j.matlet.2013.06.087 ↗
7. T. Lenihan, L. Schaper, Y.Shi, G. Morcan, and J. Parkerson, in Proceedings of the IEEE 46th Electronic Components and Technology Conference (1996), p. 119.
8. D. Scheid, in MCM ‘94 Proceedings (1994), p. 273.
9. S.M. Kang, S.G. Yoon, S.J. Suh, and D.H. Yoon, Thin Solid Films 516, 3568 (2008).10.1016/j.tsf.2007.08.027 ↗
10. I.S. Park, S.Y. Park, G.H. Jeong, and S.J. Suh, Thin Solid Films 516, 5409 (2008).10.1016/j.tsf.2007.07.021 ↗
11. L.F. Lai, W.J. Zeng, X.Z. Fu, R. Sun, and R.X. Du, J. Alloys Compd. 538, 125 (2012).10.1016/j.jallcom.2012.05.102 ↗
12. L.F. Lai, X.S. Su, X.Z. Fu, R. Sun, and C.P. Wong, Surf. Coat. Technol. 259, 759 (2014).10.1016/j.surfcoat.2014.09.039 ↗
13. M. Birkett and R. Penlington, J. Electron. Mater. 41, 2169 (2012).10.1007/s11664-012-2103-9 ↗
14. I.H. Kazi, P.M. Wild, T.N. Moore, and M. Sayer, Thin Solid Films 433, 337 (2003).10.1016/S0040-6090(03)00390-0 ↗
15. M.F. Morks and C.C. Berndt, Appl. Surf. Sci. 256, 4322 (2010).10.1016/j.apsusc.2010.02.024 ↗
16. M. Danışman and N. Cansever, J. Alloys Compd. 493, 649 (2010).10.1016/j.jallcom.2009.12.180 ↗
17. J. Wang and S. Clouser, in Proceedings of the IPC Printed Circuits EXPO (2001), p. S08-1.
18. E. Schippel, Thin Solid Films 144, 21 (1986).10.1016/0040-6090(86)90066-0 ↗
19. S. Yuichi, W. Masaya, and S. Susumu, Jpn. J. Appl. Phys. 40, 5091 (2001).10.1143/JJAP.40.5091 ↗
20. J. Rölke, Electrocompon. Sci. Technol. 9, 51 (1981).10.1155/APEC.9.51 ↗
21. K. Tao, X.L. Zhou, H. Cui, and J.S. Zhang, Surf. Coat. Technol. 203, 1406 (2009).10.1016/j.surfcoat.2008.11.020 ↗
22. J. Wang, R. Hilburn, S. Clouser, and B. Greenlee, in Proceedings of the IPC Annual Meeting (2002), p. S03-4.
23. L.F. Lai, W.J. Zeng, X.Z. Fu, R. Sun, and R.X. Du, Surf. Coat. Technol. 218, 80 (2013).10.1016/j.surfcoat.2012.12.030 ↗
24. A.Y. Bykov, S.D. Karpukhin, Y.V. Panfilov, V.O. Cheptsov, and A.V. Osipov, Met. Sci. Heat Treat. 45, 396 (2003).10.1023/B:MSAT.0000009788.88059.14 ↗
25. M. Wahab, H. Mamat, and A. Jalar, Adv. Mater. Res. 146–147, 1937 (2010).10.4028/www.scientific.net/AMR.146-147.1937 ↗
26. P.Z. Sun, M. Zhu, K.L. Wang, M.L. Zhong, J.Q. Wei, D.H. Wu, H.W. Zhu, and A.C.S. Appl, Mater. Interfaces 5, 9563 (2013).10.1021/am403186r ↗
27. D. Nachrodt, U. Paschen, A.T. Have, and H. Vogt, Electron Dev. Lett. 29, 212 (2008).10.1109/LED.2007.915384 ↗
28. E.H. Sondheimer, Adv. Phys. 1, 1 (1952).10.1080/00018735200101151 ↗
29. M.A. Howson, J. Phys. F Met. Phys. 14, L25 (1984).10.1088/0305-4608/14/3/001 ↗
30. S.Y. Tan, X.H. Zhang, X.J. Wu, and J.Q. Jiang, Chin. J. Nonferrous Met. 21, 1367 (2011).10.1016/S1003-6326(11)60867-4 ↗
31. F. Lai, L. Lin, Z. Huang, R. Gai, and Y. Qu, Appl. Surf. Sci. 253, 1801 (2006).10.1016/j.apsusc.2006.03.014 ↗
32. S. Vinayak, H.P. Vyas, K. Muraleedharan, and V.D. Vankar, Thin Solid Films 514, 52 (2006).10.1016/j.tsf.2006.02.025 ↗
33. P. Poulopoulos, V. Kapaklis, C. Politis, P. Schweiss, and D. Fuchs, J. Nanosci. Nanotechnol. 6, 3867 (2006).10.1166/jnn.2006.629 ↗
34. A. Wang, P. Dhamelineourt, J. Dubessy, D. Guerard, P. Landais, and M. Lelaurain, Carbon 27, 209 (1989).10.1016/0008-6223(89)90125-5 ↗
35. A.M. Asl, P. Kameli, M. Ranjbar, H. Salamati, and M. Jannesari, Superlattices Microstruct. 81, 64 (2015).10.1016/j.spmi.2014.11.041 ↗
36. M. Chhowalla, A. Ferrari, J. Robertson, and G. Amaratunga, Appl. Phys. Lett. 76, 1419 (2000).10.1063/1.126050 ↗