Preparation and Characterization of BaTiO3–PbZrTiO3 Coating for Pyroelectric Energy Harvesting
Source abstract
Abstract
Harvesting energy from waste heat is a promising field of research as there are significant energy recovery opportunities from various waste thermal energy sources. The present study reports pyroelectric energy harvesting using thick film prepared from a (x)BaTiO3–(1 − x)PbZr0.52Ti0.48O3 (BT–PZT) solid solution. The developed BT–PZT system is engineered to tune the ferro to paraelectric phase transition temperature of it in-between the phase transition temperature of BaTiO3 (393 K) and PbZrTiO3 (573 K) with higher pyroelectric figure-of-merit (FOM). The temperature-dependent dielectric behavior of the material has revealed the ferro- to paraelectric phase transition at 427 K with a maximum dielectric constant of 755. The room-temperature (298 K) pyroelectric coefficient (Pi) of the material was obtained as 738.63 μC/m2K which has yielded a significantly high FOM of 1745.8 J m−3 K−2. The enhancement in pyroelectric property is attributed to the morphotopic phase transition between tetragonal and rhombohedral PZT phases in the BT–PZT system. The developed BT–PZT system is capable of generating a power output of 1.3 mW/m2 near the Curie temperature with a constant rate (0.11 K/s) of heating. A signal conditioning circuit has been developed to rectify the time-varying current and voltage signals obtained from the harvester during heating cycles. The output voltage generated by the pyroelectric harvester has been stored in a capacitor for powering wearable electronics.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative Energy Harvesting Technologies · Advanced Sensor and Energy Harvesting Materials · Dielectric materials and actuators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. C.R. Bowen, J. Taylor, E. Leboulbar, D. Zabek, A. Chauhan, and R. Vaish, Energy Environ. Sci. 7, 3836–3856 (2014).10.1039/C4EE01759E ↗
2. Scott R. Hunter, Nickolay V. Lavrik, Salwa Mostafa, Slo Rajic and Panos G. Datskos, in Proceedings SPIE Energy Harvesting and Storage: Materials, Devices and Applications III 8337: 83770D1-14 (2012).
3. S. Priya, J. Electroceram. 19, 167–184 (2007).10.1007/s10832-007-9043-4 ↗
4. G. Sebald, D. Guyomar, and A. Agbossou, Smart Mater. Struct. 18, 125006 (2009).10.1088/0964-1726/18/12/125006 ↗
5. R. Law, A. Harvey, and D. Reay, Appl. Therm. Eng. 53, 188–196 (2013).10.1016/j.applthermaleng.2012.03.024 ↗
6. C.R. Bowen, H.A. Kim, P.M. Weaver, and S. Dunn, Energy Environ. Sci. 7, 25–44 (2014).10.1039/C3EE42454E ↗
7. G. Zhang, S. Jiang, Y. Zeng, Y. Zhang, Q. Zhang, and Y. Yu, J. Am. Ceram. Soc. 92, 3132–3134 (2009).10.1111/j.1551-2916.2009.03355.x ↗
8. G. Zhang, S. Jiang, J. He, J. Wang, Q. Zhang, Y. Zhang, and Y. Yu, Phys. Status Solidi A 208, 2699–2708 (2011).10.1002/pssa.201127226 ↗
9. B.K. Gan, J.M. Xue, D.M. Wan, and J. Wang, Appl. Phys. A 69, 433–436 (1999).10.1007/s003390051027 ↗
10. W. Chaisan, S. Ananta, and T. Tunkasiri, Curr. Appl. Phys. 4, 182–185 (2004).10.1016/j.cap.2003.11.004 ↗
11. W. Chaisan, R. Yimnirun, S. Ananta, and D.P. Cann, Mater. Chem. Phys. 104, 113–118 (2007).10.1016/j.matchemphys.2007.02.094 ↗
12. A. Chamola, H. Singh, and U.C. Naithani, Adv. Mater. Lett. 2, 148–152 (2011).10.5185/amlett.2010.11183 ↗
13. SidneyB Lang, Sourcebook of Pyroelectricity (Philadelphia: Gordon and BreachScience, 1974), p. 33.
14. S.W. Lu, B.I. Lee, Z.L. Wang, and W.D. Samuels, J. Cryst. Growth 219, 269–276 (2000).10.1016/S0022-0248(00)00619-9 ↗
15. D. Lingam, A.R. Parikh, J. Huang, A. Jain, and M.M. Jolandan, Int J Smart Nano Mater. 4, 229–245 (2013).10.1080/19475411.2013.872207 ↗
16. M. Sharma, A. Chauhan, R. Vaish, and V.S. Chauhanm, Smart Mater. Struct. 24, 105013 (2015).10.1088/0964-1726/24/10/105013 ↗
17. G. Zhang, S. Jiang, Y. Zhang, and T. Xie, Curr. Appl. Phys. 9, 1434–1437 (2009).10.1016/j.cap.2009.03.019 ↗
18. J.S. Yang, S.H. Kim, J.H. Yeom, C.Y. Koo, C.S. Hwang, E. Yoon, D.J. Kim, and J. Ha, Integr. Ferroelectr. 54, 515–525 (2003).
19. T. Yu, G. Zhang, Y. Yu, Y. Zeng, and S. Jiang, Sens. Actuator A Phys. 223, 159–166 (2015).10.1016/j.sna.2015.01.008 ↗