journal article·2016-12

Phase Equilibria of the Fe-Ni-Sn Ternary System at 270°C

Tzu-Ting Huang, Shih-Wei Lin, Chih-Ming Chen, Pei Yu Chen, Yee-Wen Yen

Journal of Electronic Materials· Volume 45· Issue 12
Publisher page

Abstract

The Fe-42 wt.% Ni alloy, also known as a 42 invar alloy (Alloy 42), is used as a lead-frame material because its thermal expansion coefficient is much closer to Si substrate than Cu or Ni substrates. In order to enhance the wettability between the substrate and solder, the Sn layer was commonly electroplated onto the Alloy 42 surface. A clear understanding of the phase equilibria of the Fe-Ni-Sn ternary system is necessary to ensure solder-joint reliability between Sn and Fe-Ni alloys. To determine the isothermal section of the Fe-Ni-Sn ternary system at 270°C, 26 Fe-Ni-Sn alloys with different compositions were prepared. The experimental results confirmed the presence of the Fe3Ni and FeNi phases at 270°C. Meanwhile, it observed that the isothermal section of the Fe-Ni-Sn ternary system was composed of 11 single-phase regions, 19 two-phase regions and nine tie-triangles. Moreover, no ternary compounds were found in the Fe-Ni-Sn system at 270°C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Metallurgical and Alloy Processes · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. W.R. Johammes and W. Johnson, Int. J. Microcircuits Electron. Packag. 17, 135 (1994).
2. D.R. Stelmak and J.I. Vesce, Natl. Electron. Packag. Prod. Conf. 1, 286 (1995).
3. Y. Kariya, Y. Hirata, and M. Otsuka, J. Electron. Mater. 28, 1263 (1999).10.1007/s11664-999-0166-z ↗
4. H. Zhang, Q.S. Zhu, Z.Q. Liu, L. Zhang, H.Y. Guo, and C.M. Lai, J. Mater. Sci. Technol. 30, 928 (2014).10.1016/j.jmst.2014.06.009 ↗
5. Y.W. Yen, C.W. Chiu, C.M. Chen, M.T. Lai, and J.Y. Dai, J. Electron. Mater. 44, 909 (2014).10.1007/s11664-014-3573-8 ↗
6. Y.W. Yen, Y.P. Hsieh, C.C. Jao, C.W. Chiu, and Y.S. Li, J. Electron. Mater. 43, 187 (2014).10.1007/s11664-013-2727-4 ↗
7. Y.W. Yen, R.S. Syu, C.M. Chen, C.C. Jao, and G.D. Chen, Microelectron. Reliab. 54, 233 (2014).10.1016/j.microrel.2013.09.003 ↗
8. R.J. Klein Wassink, Soldering in Electronics: A Comprehensive Treatise on Soldering Technology for Surface Mounting and Through-Hole Techniques (Brooklyn, New York: Electrochemical Publications, 1984), pp. 135–202.
9. P.H. Yee, S.W. Low, and Y.K. Swee, in IEMT/IMC Proceedings, (IEEE Components, Packaging, and Manufacturing Technology Society and SHM: The Microelectronics Society (Tokyo: Japan, 1998), pp. 284–289.
10. Y.W. Yen, J.W. Su, and D.P. Huang, J. Alloy. Compd. 457, 270 (2008).10.1016/j.jallcom.2007.03.053 ↗
11. C.C. Jao, Y.W. Yen, C.Y. Lin, and C. Lee, Intermetallics 16, 463 (2008).10.1016/j.intermet.2007.12.007 ↗
12. W.K. Liou and Y.W. Yen, Intermetallics 17, 72 (2009).10.1016/j.intermet.2008.10.001 ↗
13. H. Okamoto, ASM Handbook: Alloy Phase Diagrams, ed. H. Baker and H. Okamoto (Ohio: ASM International, 1992), p. 2.203.
14. P. Nash and A. Nash, ASM Handbook: Alloy Phase Diagrams, ed. H. Baker and H. Okamoto (Ohio: ASM International, 1992), p. 2.318.
15. L.J. Swartzendruber and V.P. Itkin, C.R. Alcock.Binary Alloy Phase Diagrams 2 nd , ed. T.B. Massalski, H. Okamoto, P.R. Subramanian, and L. Kacprzak (Ohio: ASM International, 1992), pp. 1735–1738.
16. A.D. Romig Jr and J.I. Goldstein, Metall. Trans. A 11, 1151 (1980).10.1007/BF02668139 ↗
17. O. Kubaschewski, Iron Binary Phase Diagrams (New York: Springer-Verlag, 1982), pp. 73–78.
18. C.W. Yang, D.B. Williams, and J.I. Goldstein, J. Phase Equilibria 17, 522 (1996).10.1007/BF02665999 ↗
19. K.B. Reuter, D.B. Williams, and J.I. Goldstein, Metall. Trans. A 20A, 719 (1989).10.1007/BF02667589 ↗
20. P. Schafmeister and R. Ergang, Arch. Eisenhuettenwes. 13, 95 (1939).
21. N. Sarafianos, Mater. Sci. Technol. 3, 66 (1987).10.1179/026708387790123133 ↗
22. W.K. Choi and H.M. Lee, J. Electron. Mater. 28, 1251 (1999).10.1007/s11664-999-0164-1 ↗
23. C.W. Hwang, K. Suganuma, E. Saiz, and A.P. Tomsia, Trans. JWRI 30, 167 (2001).
24. C.W. Hwang, K.S. Kim, and K. Suganuma, J. Electron. Mater. 32, 1249 (2003).10.1007/s11664-003-0019-0 ↗
25. C.W. Hwang and K. Suganuma, J. Mater. Res. 18, 1202 (2003).10.1557/JMR.2003.0165 ↗
26. Y.W. Yen, H.M. Hsiao, S.W. Lin, P.J. Huang, and C. Lee, J. Electron. Mater. 41, 144 (2012).10.1007/s11664-011-1727-5 ↗
27. Powder Diffraction File™ (PDF) in the Joint Committee on Powder Diffraction Standards (JCPDS)-International Centre for Diffraction Data (ICDD) (Newtown Square, PA 2003).
28. C.E. Ho, Y.W. Lin, S.C. Yang, C.R. Kao, and D.S. Jinang, J. Electron. Mater. 35, 1017 (2006).10.1007/BF02692562 ↗
29. C.Y. Chen, H.J. Wu, and S.W. Chen, J. Alloys Compd. 547, 100 (2013).10.1016/j.jallcom.2012.08.071 ↗
30. J.S. Chang, S.W. Chen, K.C. Chiu, H.J. Wu, and J.J. Chen, Metall. Mater. Trans. A 45A, 3278 (2014).