Preparation in Acidic and Alkaline Conditions and Characterization of α-Bi2Mo3O12 and γ-Bi2MoO6 Powders
Source abstract
Abstract
α-Bi2Mo3O12 and γ-Bi2MoO6 powders have been successfully fabricated via a sol–gel method starting from bismuth nitrate and ammonium molybdate. The as-synthesized samples were characterized by x-ray powder diffraction analysis, thermogravimetry and differential thermogravimetry, scanning electron microscopy, and ultraviolet–visible (UV–Vis) absorption spectroscopy. The results indicated the formation of α-Bi2Mo3O12 and γ-Bi2MoO6 powders in acidic (pH 5) and alkaline (pH 9) conditions, respectively. α-Bi2Mo3O12 exhibited irregular shape, while γ-Bi2MoO6 showed approximately flake-like morphology. The bandgap of pure α-Bi2Mo3O12 and γ-Bi2MoO6 was estimated to be about 2.83 eV and 2.85 eV, respectively, according to UV–Vis studies. The slight shift of the absorption edge towards longer wavelength for α-Bi2Mo3O12 indicated a decrease of the optical bandgap. Photocatalytic experiments showed that γ-Bi2MoO6 exhibited higher photodegradation activity of methylene blue compared with α-Bi2Mo3O12.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Photocatalysis Techniques · Gas Sensing Nanomaterials and Sensors · Catalysis and Oxidation Reactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. P.A. Batist, J.F.H. Bouwens, and G.C.A. Schuit, J. Catal. 25, 1 (1972).10.1016/0021-9517(72)90196-0 ↗
2. M.M. Bettahar, G. Costentin, L. Savary, and J.C. Lavalley, Appl. Catal. A 145, 1 (1996).10.1016/0926-860X(96)00138-X ↗
3. Y. Shimodaira, H. Kato, and H. Kobayashi, J. Phys. Chem. B 110, 17 (2006).10.1021/jp0622482 ↗
4. L. Xie, J. Ma, and G. Xu, Mater. Chem. Phys. 110, 197 (2008).10.1016/j.matchemphys.2008.01.035 ↗
5. E.L. Cuéllara, A.L. Cruza, and K.H.L. Rodríguez, Catal. Today 166, 140 (2011).10.1016/j.cattod.2010.05.005 ↗
6. A.M. Cruz, S.O. Alfaro, and E.L. Cuéllar, Catal. Today 129, 194 (2007).10.1016/j.cattod.2007.08.004 ↗
7. J. Bi, L. Wu, and J. Li, Acta Mater. 55, 4699 (2007).10.1016/j.actamat.2007.04.034 ↗
8. H. Xie, D. Shen, X. Wang, and G. Shen, Mater. Chem. Phys. 110, 332 (2008).10.1016/j.matchemphys.2008.02.008 ↗
9. Y.L. Tian, B.B. Chang, and Z.C. Yang, RSC Adv. 4, 4187 (2014).10.1039/C3RA46079G ↗
10. L. Meng, L.Y. Zheng, L.H. Cheng, G.R. Li, L.Z. Huang, Y. Gu, and F.P. Zhang, J. Mater. Chem. 21, 11418 (2011).10.1039/c1jm10807g ↗
11. M.Y. Zhang, C.L. Shao, and P. Zhang, J. Hazard. Mater. 22, 155 (2012).10.1016/j.jhazmat.2012.05.006 ↗
12. X. Wang, F. Gu, and L. Li, Mater. Res. Bull. 48, 3761 (2013).10.1016/j.materresbull.2013.05.104 ↗
13. A.M. Cruz and S.O. Alfaro, Solid State Sci. 11, 829 (2009).10.1016/j.solidstatesciences.2009.01.007 ↗
14. N. Kim, R.N. Vannier, and C.P. Grey, Chem. Mater. 17, 1952 (2005).10.1021/cm048388a ↗
15. C.C. Lin, S.L. Young, and C.Y. Kung, Thin Solid Films 529, 479 (2013).10.1016/j.tsf.2012.03.058 ↗
16. X. Xiao, R.P. Hu, and C. Liu, Appl. Catal. B 140, 433 (2013).10.1016/j.apcatb.2013.04.037 ↗
17. M. Jalalah, M. Faisal, H. Bouzid, J.G. Park, S.A. Sayari, and A.A. Ismail, J. Ind. Eng. Chem. 30, 183 (2015).10.1016/j.jiec.2015.05.020 ↗