journal article·2010-01

Heavily Aluminum-Doped Epitaxial Layers for Ohmic Contact Formation to p-Type 4H-SiC Produced by Low-Temperature Homoepitaxial Growth

B. Krishnan, S.P. Kotamraju, G. Melnychuk, H. Das, J. N. Merrett, Y. Koshka

Journal of Electronic Materials· Volume 39· Issue 1
Publisher page

Abstract

In this work, heavily aluminum (Al)-doped layers for ohmic contact formation to p-type SiC were produced by utilizing the high efficiency of Al incorporation during the epitaxial growth at low temperature, previously demonstrated by the authors’ group. The low-temperature halo-carbon epitaxial growth technique with in situ trimethylaluminum (TMA) doping was used. Nearly featureless epilayer morphology with an Al atomic concentration exceeding 3 × 1020 cm−3 was obtained after growth at 1300°C with a growth rate of 1.5 μm/h. Nickel transfer length method (TLM) contacts with a thin adhesion layer of titanium (Ti) were formed. Even prior to contact annealing, the as-deposited metal contacts were almost completely ohmic, with a specific contact resistance of 2 × 10−2 Ω cm2. The specific contact resistance was reduced to 6 × 10−5 Ω cm2 by employing a conventional rapid thermal anneal (RTA) at 750°C. Resistivity of the epitaxial layers better than 0.01 Ω cm was measured for an Al atomic concentration of 2.7 × 1020 cm−3.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon Carbide Semiconductor Technologies · Semiconductor materials and devices · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. Y. Koshka, H.D. Lin, G. Melnychuk, and C. Wood, J. Cryst. Growth 294, 260 (2006).10.1016/j.jcrysgro.2006.06.024 ↗
2. B. Krishnan, H. Das, H.-De. Lin, and Y. Koshka, Appl. Phys. Lett. 89, 262103 (2006).10.1063/1.2423323 ↗
3. H. Wirth, D. Panknin, W. Skorupa, and E. Niemann, Appl. Phys. Lett. 74, 979 (1999).10.1063/1.123429 ↗
4. U. Forsberg, Ö. Danielsson, A. Henry, M.K. Linnarsson, and E. Janzén, J. Cryst. Growth 253, 340 (2003).10.1016/S0022-0248(03)01045-5 ↗
5. M.A. Fanton, B.E. Weiland, and J.M. Redwing, J. Cryst. Growth 310, 4088 (2008).10.1016/j.jcrysgro.2008.06.027 ↗
6. T. Kimoto, A. Itoh, H. Matsunami, T. Nakata, and M. Watanabe, J. Electron. Mater. 25, 879 (1996).10.1007/BF02666653 ↗
7. N.S. Sak, A.K. Agarwal, S.-H. Ryu, and J.W. Palmour, J. Appl. Phys. 90, 2796 (2001).10.1063/1.1392958 ↗
8. H.D. Lin, G. Melnychuk, J.L. Wyatt, and Y. Koshka, Mater. Sci. Forum 556–557, 133 (2007).10.4028/www.scientific.net/MSF.556-557.133 ↗
9. J. Crofton, J.R. Williams, A.V. Adedeji, J.D. Scofield, S. Dhar, L.C. Feldman, and M.J. Bozack, Mater. Sci. Forum 527–529, 895 (2006).10.4028/www.scientific.net/MSF.527-529.895 ↗
10. R. Perez, N. Mestres, D. Tournier, P. Godignon, and J. Millan, Diam. Relat. Mater. 14, 1146 (2005).10.1016/j.diamond.2004.11.015 ↗