journal article·2014-09

Phase Evolution in the AuCu/Sn System by Solid-State Reactive Diffusion

Sangeeta Santra, Sarfaraj Islam, Raju Ravi, Vesa Vuorinen, Tomi Laurila, Aloke Paul

Journal of Electronic Materials· Volume 43· Issue 9
Publisher page

Abstract

The interfacial reactions between several Au(Cu) alloys and pure Sn were studied experimentally at 200°C. Amounts of Cu in the AuSn4 and AuSn2 phases were as low as 1 at.%. On the basis of these experimental results there is no continuous solid solution between (Au,Cu)Sn and (Cu,Au)6Sn5. The copper content of (Au,Cu)Sn was determined to be approximately 7–8 at.%. Substantial amounts of Au were present in the (Cu,Au)6Sn5 and (Cu,Au)3Sn phases. Two ternary compounds were formed, one with stoichiometry varying from (Au40.5Cu39)Sn20.5 to (Au20.2Cu59.3)Sn20.5 (ternary “B”), the other with the composition Au34Cu33Sn33 (ternary “C”). The measured phase boundary compositions of the product phases are plotted on the available Au–Cu–Sn isotherm and the phase equilibria are discussed. The complexity and average thickness of the diffusion zone decreases with increasing Cu content except for the Au(40 at.%Cu) couple.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Intermetallics and Advanced Alloy Properties · Metallurgical and Alloy Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. P. Zarrow, Circuit Assem. (1999).
2. A.F.J. Baggerman and M.J. Batenburg, IEEE Trans. Compon. Packag. Technol. B 18, 257 (1995). doi: 10.1109/96.386258 .10.1109/96.386258 ↗
3. C.Y. Liu and S.J. Wang, J. Mater. Res. 19, 2536 (2004). doi: 10.1557/JMR.2004.0330 .10.1557/JMR.2004.0330 ↗
4. S. Zama, D.F. Baldwin, T. Hikami, and H. Murata, IEEE Trans. Electron. Packag. Manuf. 24, 261 (2001). doi: 10.1109/6104.980034 .10.1109/6104.980034 ↗
5. T. Laurila, V. Vuorinen, and J.F. Kivilahti, Mater. Sci. Eng. R 49, 1 (2005). doi: 10.1016/j.mser.2005.03.001 .10.1016/j.mser.2005.03.001 ↗
6. M. Creydt and R. Fichter, Metallurgy 25, 1124 (1971).
7. C.W. Chang, Q.P. Lee, C.E. Ho, and C.R. Kao, J. Electron. Mater. 35, 366 (2006). doi: 10.1007/BF02692458 .10.1007/BF02692458 ↗
8. Y.W. Yen, H.W. Tsang, K. Zeng, S.J. Wang, and C.Y. Liu, J.␣Electron. Mater. 38, 2257 (2009). doi: 10.1007/S11664-009-0920-2 .10.1007/s11664-009-0920-2 ↗
9. Y.W. Yen, C.C. Jao, H.M. Hsiao, C.Y. Lin, and C. Lee, J.␣Electron. Mater. 36, 147 (2007). doi: 10.1007/S11664-006-0029-9 .10.1007/s11664-006-0029-9 ↗
10. C.F. Yang and S.W. Chen, Intermetallics 18, 672 (2010). doi: 10.1016/j.intermet.2009.11.003 .10.1016/j.intermet.2009.11.003 ↗
11. O.B. Karlsen, A. Kjekshus, and E. Røst, Acta Chem. Scand. 44, 197 (1990). doi: 10.3891/acta.chem.scand.44-0197 .10.3891/acta.chem.scand.44-0197 ↗
12. O.B. Karlsen, A. Kjekshus, and E. Røst, Acta Chem. Scand. 46, 147 (1992). doi: 10.3891/acta.chem.scand.46-0147 .10.3891/acta.chem.scand.46-0147 ↗
13. O.B. Karlsen, A. Kjekshus, C. Rømming, and E. Røst, Acta Chem. Scand. 44, 1076 (1992). doi: 10.3891/acta.chem.scand.46-1076 .10.3891/acta.chem.scand.46-1076 ↗
14. E. Zakel (Ph.D. thesis, Technical University Berlin, 1994).
15. J.F. Roeder, M.R. Notis, and J.I. Goldstein, Defect Diffus. Forum 59, 271 (1988). doi: 10.4028/www.scientific.net/DDF.59.271 .10.4028/www.scientific.net/DDF.59.271 ↗
16. C.N.C. Luciano, K.I. Udoh, M. Nakagawa, S. Matsuya, and M. Ohta, J. Alloys Compd. 337, 289 (2002). doi: 10.1016/S0925-8388(01)01960-0 .10.1016/S0925-8388(01)01960-0 ↗
17. H. Okamoto and T.B. Massalski, Bull. Alloy Phase Diagr. 5, 492 (1984). doi: 10.1007/BF02872904 .10.1007/BF02872904 ↗
18. J. Ciulik and M.R. Notis, J. Alloys Compd. 191, 71 (1993). doi: 10.1016/0925-8388(93)90273-P .10.1016/0925-8388(93)90273-P ↗
19. H.S. Liu, C.L. Liu, K. Ishida, and Z.P. Jui, J. Electron. Mater. 3, 1290 (2003). doi: 10.1007/S11664-003-0025-2 .
20. T. Yamada, K. Miura, M. Kajihara, N. Kurokawa, and K. Sakamoto, Mater. Sci. Eng. A 390, 118 (2005). doi: 10.1016/j.msea.2004.08.053 .10.1016/j.msea.2004.08.053 ↗
21. A. Paul, A.A. Kodentsov, and F.J.J. van Loo, Int. J. Mater. Res. 95, 913 (2004).10.1515/ijmr-2004-0169 ↗
22. S. Nakahara, R. McCoy, L. Buene, and J. Vandenberg, Thin Solid Films 84, 185 (1981). doi: 10.1016/0040-6090(81)90468-5 .10.1016/0040-6090(81)90468-5 ↗
23. R. Ravi and A. Paul, J. Mater. Sci. 23, 2306 (2012). doi: 10.1007/S10854-012-0832-4 .
24. S. Roy and A. Paul, Philos. Mag. 1 (2012). doi: 10.1080/14786435.2012.705036 .10.1080/14786435.2012.705036 ↗
25. S. Prasad and A. Paul, Intermetallics 19, 1191 (2011). doi: 10.1016/j.intermet.2011.03.027 .10.1016/j.intermet.2011.03.027 ↗
26. J.Y. Byun, J.K. Yoon, G.H. Kim, J.S. Kim, and C.S. Choi, Scr. Mater. 46, 537 (2002). doi: 10.1016/S1359-6462(02)00029-5 .10.1016/S1359-6462(02)00029-5 ↗
27. R. Labie, W. Ruythooren, and J.V. Humbeck, Intermetallics 15, 396 (2007). doi: 10.1016/j.intermet.2006.08.003 .10.1016/j.intermet.2006.08.003 ↗
28. T. Takenaka, S. Kano, M. Kajihara, N. Kurokawa, and K. Sakamoto, Mater. Sci. Eng. A 396, 115 (2005). doi: 10.1016/j.msea.2005.01.025 .10.1016/j.msea.2005.01.025 ↗
29. M. Onishi and H. Fujibuchi, Trans. Jpn. Inst. Met. 16, 539–547 (1975).10.2320/matertrans1960.16.539 ↗
30. S. Kumar, C.A. Handwerker, and M.A. Dayananda, J. Phase Equilib. Diffus. 32, 309 (2011). doi: 10.1007/s11669-011-9907-9 .10.1007/s11669-011-9907-9 ↗
31. A. Paul, C. Ghosh, and W.J. Boettinger, Met. Mater. Trans. A 42A, 952 (2011). doi: 10.1007/S11661-010-0592-9 .10.1007/s11661-010-0592-9 ↗
32. A. Paul (Ph.D. thesis, Eindhoven University of Technology, The Netherlands, 2004).
33. T.W. Ming, H.E. An-qiang, L. Qi, and D.G. Ivey, Trans. Nonferr. Met. Soc. China 20, 90 (2010). doi: 10.1016/S1003-6326(09)60102-3 .10.1016/S1003-6326(09)60102-3 ↗
34. M. Li, Z. Du, C. Guo, and C. Li, J. Alloys Compd. 477, 104 (2009). doi: 10.1016/j.jallcom.2008.09.141 .10.1016/j.jallcom.2008.09.141 ↗
35. J.W. Gibbs, Scientific Papers (New York: Dover, 1961).
36. A.K. Kumar and A. Paul, J. Electron. Mater. 38, 700 (2009). doi: 10.1007/s11664-008-0632-z .10.1007/s11664-008-0632-z ↗
37. T. Laurila, V. Vuorinen, A.K. Kumar, and A. Paul, Appl. Phys. Lett. 96, 231910 (2010). doi: 10.1063/1.3453502 .10.1063/1.3453502 ↗
38. S. Prasad and A. Paul, Intermetallics 22, 210 (2012). doi: 10.1016/j.intermet.2011.11.012 .10.1016/j.intermet.2011.11.012 ↗
39. T. Takenaka, S. Kano, M. Kajihara, N. Kurokawa, and K. Sakamoto, Mater. Trans. 46, 1825 (2005).10.2320/matertrans.46.1825 ↗
40. T. Yamada, K. Miura, M. Kajihara, N. Kurokawa, and K. Sakamoto, J. Mater. Sci. 39, 2327 (2004). doi: 10.1023/B:JMSC.0000019993.32079.c2 .10.1023/B:JMSC.0000019993.32079.c2 ↗
41. T. Yamada, K. Miura, M. Kajihara, N. Kurokawa, and K. Sakamoto, Mater. Sci. Eng. A 390, 118 (2005). doi: 10.1016/j.msea.2004.08.053 .10.1016/j.msea.2004.08.053 ↗
42. T. Takenaka, M. Kajihara, N. Kurokawa, and K. Sakamoto, Mater. Sci. Eng. A 427, 210 (2006). doi: 10.1016/j.msea.2006.04.111 .10.1016/j.msea.2006.04.111 ↗
43. V.C. Marcotte and K. Schroder, MRS Symp. Proc. 19, 403 (1983). doi: 10.1557/PROC-19-403 .10.1557/PROC-19-403 ↗