Computational Optimization of a Thermoelectric Ice-Maker as a Function of the Geometric Parameters of a Peltier Module
Source abstract
Abstract
The objective of this paper is to optimize a thermoelectric ice-maker installed in a no-frost refrigerator, by means of a computational model. This model provides the electric power consumption of the Peltier module and the ice production. The Peltier module is the most important part of the thermoelectric ice-maker; therefore, it must be optimized in order to obtain an efficient ice-maker. First of all, the length of the thermocouples of the Peltier module has been optimized in order to obtain the maximum ice production. It turned out that 3.5 kg per day could be achieved if 1.5-mm-long thermocouples were used. The coefficient of performance (COP) was 0.44. Second, the ice production was expressed as a function of the number of thermocouples of the Peltier module. Given a constant electric power consumption of the module, the results showed that the maximum ice production was achieved with a Peltier module with 254 thermocouples. However, if a module with 140 thermocouples was installed, the ice production would decrease by only 1%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Heat Transfer and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. G. Min and D.M. Rowe, Appl. Energ. 83, 133 (2006).10.1016/j.apenergy.2005.01.002 ↗
2. D. Astrain and J.G. Vián, J. Enhanc. Heat Transf. 12, 159 (2005).10.1615/JEnhHeatTransf.v12.i2.20 ↗
3. D. Astrain, J.G. Vian, and M. Dominguez, Appl. Therm. Eng. 23, 2183 (2003).10.1016/S1359-4311(03)00202-3 ↗
4. J.G. Vian and D. Astrain, Appl. Therm. Eng. 28, 1514 (2008).10.1016/j.applthermaleng.2007.08.014 ↗
5. S.B. Riffat and S.A. Omer, Renew. Energ. 23, 313 (2001).10.1016/S0960-1481(00)00170-1 ↗
6. H.H. Sik, K.S. Young, J.T. Ho, J.Y. Jun, L. Daewoong, J.K. Sang, and O.D. Hoon, 11th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (2008), pp. 1222–1230.
7. B.J. Huang, C.J. Chin, and C.L. Duang, Int. J. Refrig. 23, 208 (2000).10.1016/S0140-7007(99)00046-8 ↗
8. M.H. Hasan and T.K. Chuan, 9th Electronics Packaging Technology Conference (2007), pp. 848–852.
9. C. Reiyu, Appl. Therm. Eng. 24, 2207 (2004).10.1016/j.applthermaleng.2004.03.001 ↗
10. R. Chein and C. Yehong, Int. J. Refrig. 28, 828 (2005).10.1016/j.ijrefrig.2005.02.001 ↗
11. J.G. Vián, D. Astrain, and J.J. Aguas, J. Thermoelectr. 3, 52 (1999).
12. J.G. Vián, D. Astrain, and M. Domínguez, Appl. Therm. Eng. 22, 407 (2002).10.1016/S1359-4311(01)00102-8 ↗
13. J.G. Vián, D. Astrain, and M. Dominguez, J. Thermoelectr. 1, 38 (2001).
14. J.G. Vián and D. Astrain, Appl. Therm. Eng. 29, 1935 (2009).10.1016/j.applthermaleng.2008.09.018 ↗
15. J.G. Vián, D. Astrain, and A. Rodríguez, 6th European Conference on Thermoelectrics, Paris (2008), p. P1-19-1.
16. J.G. Vián, A. Rodríguez, D. Astrain, J.G-Barberena, and I.P. Urdiain, 25th International Conference on Thermoelectrics, Wien (2006), p. 120.
17. J.G. Vián, D. Astrain, and A. Rodríguez, 5th European Conference on Thermoelectrics, Odessa, Ukraine (2007), p. 84.
18. A. Rodríguez, J.G. Vián, and D. Astrain, Appl. Therm. Eng. 29, 2961 (2009).10.1016/j.applthermaleng.2009.03.005 ↗
19. D. Astrain, J.G. Vián, and J. Albizua, Appl. Therm. Eng. 25, 3149 (2005).10.1016/j.applthermaleng.2005.04.003 ↗
20. www.melcor.com .
21. F.J. Villasevil Marco, Doctoral Thesis, Universitat Politecnica de Catalunya (2006).
22. G. Min and M. Rowe, J. Power Sources 38, 253 (1992).10.1016/0378-7753(92)80114-Q ↗
23. J. Luo, L. Chen, F. Sun, and C. Wu, Energy Convers. Manag. 44, 3197 (2003).10.1016/S0196-8904(03)00107-9 ↗
24. G.S. Attey, 25th International Conference on Thermoelectrics, Nagoya, Japan (1998), p. 519.