journal article·2009-06

Comparison of Insulated with Bare Au Bonding Wire: HAZ Length, HAZ Breaking Force, and FAB Deformability

Wan Ho Song, Chunjin Hang, Andrew Pequegnat, Michael Mayer, Norman Y. Zhou, Young-Kyu Song, John Persic

Journal of Electronic Materials· Volume 38· Issue 6
Publisher page

Abstract

Two types (A and B) of 25-μm-diameter bare Au bonding wire and their corresponding insulated wire were used to produce 50-μm-diameter free-air balls (FABs) for heat-affected zone (HAZ) and FAB deformability analyses. Insulated wires showed no significant difference in HAZ length compared with bare wire for type A, while their difference lay in the range of 4% to 12% longer for type B. The HAZ breaking load of bare wire is 0.3% to 1.8% smaller than that of insulated wire for type A and not significantly different for type B even though the HAZ length is shown to be larger for insulated wire B. The deformability of the FAB from insulated wires is 1.0% to 2.1% smaller than that from bare wires for type A and 2.1% to 3.4% larger for type B.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Mechanical stress and fatigue analysis · Numerical methods in engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. G. Harman, Wire Bonding in Microelectronics: Materials, Processes, Reliability, and Yield, 2nd ed. (New York: McGraw-Hill, 1997)
2. R. Lyn, J. Persic, and Y.K. Song, 39th Intl. Symp. Microelectron. Proc. (IMAPS) (2006)
3. Semiconductor Industry Association. International Technology Roadmap for Semiconductors (ITRS), 2007. http://www.itrs.net/Links/2007ITRS/Home2007.htm
4. J. Lee, M. Mayer, Y. Zhou, and J. Persic, IEEE/CPMT Elec. Pack. Tech. Conf. Proc. (2007), p. 725
5. S.J. Hong, J.S. Cho, J.T. Moon, and J. Lee, Adv. Elec. Mater. Pack. Proc. (2001), p. 55
6. Y. Ohno, Y. Ohzeki, T. Aso, and O. Kitamura, Elec. Comp. Tech. Conf. Proc. (1992), p. 899
7. L. Hao, S.H. Ong, and L.C. Tang, IEEE/CPMT Elec. Pack. Tech. Conf. Proc. (1998), p. 313
8. J. Lee, M. Mayer, Y. Zhou, and S. J. Hong, Microelec. J., 38, 842 (2007) doi: 10.1016/j.mejo.2007.07.09510.1016/j.mejo.2007.07.095 ↗
9. C. Hang, I. Lum, J. Lee, M. Mayer, C. Wang, Y. Zhou, S.J. Hong, and S.M. Lee, Microelectron. Eng. 85, 1795 (2008), doi: 10.1016/j.mee.2008.05.00810.1016/j.mee.2008.05.008 ↗
10. G.F. Vander Voort (1984) Metallography: Principles and Practice. New York: McGraw-Hill10.31399/asm.tb.mpp.9781627082600 ↗
11. G.E.P. Box, W.G. Hunter and J.S. Hunter, Statistics for Experimenters: An Introduction to Design, Data Analysis and Model Building (New York: Wiley, 1978)
12. J. Schiøtz and K.W. Jacobsen, Science, 301, 1357 (2003). doi: 10.1126/science.108663610.1126/science.1086636 ↗