Demonstration and Characterization of Sn-3.0Ag-0.5Cu/ Sn-57Bi-1Ag Combination Solder for 3-D Multistack Packaging
Source abstract
Abstract
A combination solder of Sn-3.0Ag-0.5Cu (numbers are all in weight percent unless specified otherwise) wrapped by Sn-57Bi-1Ag was tested for application to three-dimensional (3-D) multistack packaging. The experimental variables controlled were the reflow peak temperatures (170, 185, 200, and 230°C), the reflow cycles (up to four times), and the mask which controls the amount of Sn-57Bi-1Ag solder paste (two sizes). We demonstrate and evaluate the combination solder structure, focusing on microstructural changes and the shear strength. The degree of mixing in the combination solder, which is enhanced by an increase in the reflow peak temperature, is independent of the number of reflow cycles. The ball shear strength and the lab shear strength both increased with increases in the reflow peak temperatures. This behavior is explained by the amount of the brittle Bi phase that constitutes the eutectic Sn-Bi phase.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. G. O’Malley, IEEE CPMT B 17, 284 (1994)
2. V.K. Nagesh, R. Peddada, S. Ramalingam, B. Sur, and A.␣Tai, Proceedings of the 49th Electronic Components and␣Technology Conference (Piscataway, NJ: IEEE, 1999), pp. 975–978
3. R. Shukla, V. Murali, and A. Bhansali, Proceedings of the 49th Electronic Components and Technology Conference (Piscataway, NJ: IEEE, 1999), pp. 945–949
4. J.-W. Nah, J.H. Kim, H.M. Lee, and K.-W. Paik, Acta Mater. 52, 129 (2004)10.1016/j.actamat.2003.08.035 ↗
5. D.O. Powell and A.K. Trivedi, Proceedings of the 43th Electronic Components and Technology Conference (Piscataway, NJ: IEEE, 1993), pp.182–186
6. Y.-H. Liu, and K.-L. Lin, J. Mater. Res. 20, 2184 (2005)10.1557/JMR.2005.0271 ↗
7. J.W. Nah, K.W. Paik, J.O. Suh, and K.N. Tu, J. Appl. Phys. 94, 7560 (2003)10.1063/1.1628388 ↗
8. K.S. Kim, S.H. Huh, and K. Suganuma, J. Alloy. Compd. 352, 226 (2003)10.1016/S0925-8388(02)01166-0 ↗
9. M.G. Cho, K.W. Paik, H.M. Lee, S.W. Booh, and T.-G. Kim, J. Electron. Mater. 35, 35 (2006)10.1007/s11664-006-0181-2 ↗
10. D.-G. Kim, and S.-B. Jung, J. Alloy. Compd. 386, 151 (2005)10.1016/j.jallcom.2004.05.055 ↗
11. M. McCormack, H.S. Chen, G.W. Kammlott, and S. Jin, J. Electron. Mater. 26, 954 (1997)10.1007/s11664-997-0281-7 ↗
12. H. Okamoto, Desk Handbook: Phase Diagrams for Binary Alloy. ASM International, Materials Park pp. 157 (2000)
13. M. He, Z. Chen, and G. Qi, Acta Mater. 52, 2047 (2004)10.1016/j.actamat.2003.12.042 ↗
14. C.-W. Hwang, K. Suganuma, M. Kiso, and S. Hashimoto, J. Mater. Res. 18, 2540 (2003)10.1557/JMR.2003.0354 ↗
15. J. Zhao, L. Qi, X.-M. Wang, and L. Wang, J. Alloy. Compd. 375, 196 (2004)10.1016/j.jallcom.2003.12.005 ↗
16. Y. Kariya, and M. Otsuka, J. Electron. Mater. 27, 866 (1998)10.1007/s11664-998-0111-6 ↗
17. K. Suganuma, T. Sakai, K.-S. Kim, Y. Takagi, J. Sugimoto, and M. Ueshima, IEEE Trans. Electron. Packag. Manuf. 25, 257 (2002)10.1109/TEPM.2002.807718 ↗
18. Y.-H. Jo, MS Thesis, KAIST, Korea (2006)
19. B. Sundman, B. Jansson, and J.O. Andersson, CALPHAD. 9, 153 (1985)10.1016/0364-5916(85)90021-5 ↗
20. S.-Y. Jang, T.-S. Park, Y.-S. Kim, J.-W. Jeong, J.-J. Bang, and D.-K. Kang, Proceedings of the 55th Electronic Components and Technology Conference (Piscataway, NJ: IEEE, 2005), pp. 660–664
21. T.H. Ho, J.Y. Lee, R.S. Lee, and A.W. Lin, Proceedings of the 45th Electronic Components and Technology Conference (Piscataway, NJ: IEEE, 1995), pp. 930–936
22. P.L. Liu, and J.K. Shang, Scripta Mater. 44, 1019 (2001)10.1016/S1359-6462(01)00670-4 ↗