journal article·2014-11Open access

Fabrication of Relaxer-Based Piezoelectric Energy Harvesters Using a Sacrificial Poly-Si Seeding Layer

E. M. A. Fuentes-Fernandez, A. M. Salomon-Preciado, B. E. Gnade, M. A. Quevedo-Lopez, P. Shah, H. N. Alshareef

Journal of Electronic Materials· Volume 43· Issue 11

Abstract

The effect of a polycrystalline silicon (poly-Si) seeding layer on the properties of relaxor Pb(Zr0.53,Ti0.47)O3–Pb(Zn1/3,Nb2/3)O3 (PZT–PZN) thin films and energy-harvesting cantilevers was studied. We deposited thin films of the relaxor on two substrates, with and without a poly-Si seeding layer. The seeding layer, which also served as a sacrificial layer to facilitate cantilever release, was found to improve morphology, phase purity, crystal orientation, and electrical properties. We attributed these results to reduction of the number of nucleation sites and, therefore, to an increase in relaxor film grain size. The areal power density of the wet-based released harvester was measured. The power density output of the energy harvester with this relaxor composition and the poly-Si seeding layer was 325 μW/cm2.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative Energy Harvesting Technologies · Advanced Sensor and Energy Harvesting Materials · Ferroelectric and Piezoelectric Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. I.R. Henderson, Piezoelectric Ceramics: Principles and Applications (Mackeyville: APC International Ltd., 2002), pp. 23–30.
2. A. Bell, Frontiers of Ferroelectricity (New York, USA: Springer, 2007), p. 13.10.1007/978-0-387-38039-1_2 ↗
3. S. Priya and D.J. Inman, Energy Harvesting Technologies (New York, USA: Springer, 2009), pp. 129–207.10.1007/978-0-387-76464-1 ↗
4. S. Priya, C.-T. Chen, D. Fye, and J. Zahnd, Jpn. J. Appl. Phys. 44, L104 (2005).10.1143/JJAP.44.L104 ↗
5. S. Priya, J. Electroceram. 19, 167 (2007).10.1007/s10832-007-9043-4 ↗
6. S.P. Beeby, M.J. Tudor, and N.M. White, Meas. Sci. Technol. 17, R175 (2006).10.1088/0957-0233/17/12/R01 ↗
7. X. Bai, Y. Wen, J. Yang, P. Li, J. Qiu, and Y. Zhu, J. Appl. Phys. 111, 07A938 (2012).10.1063/1.3677877 ↗
8. R. Amirtharajah and A.P. Chandrakasan, IEEE J. Solid-State Circuits 33, 687 (1998).10.1109/4.668982 ↗
9. P.D. Mitcheson, P. Miao, B.H. Stark, E.M. Yeatman, A.S. Holmes, and T.C. Green, Sens. Actuators A 115, 523 (2004).10.1016/j.sna.2004.04.026 ↗
10. S. Roundy, P.K. Wright, and J. Rabaey, Comput. Commun. 26, 1131 (2003).10.1016/S0140-3664(02)00248-7 ↗
11. W. Lei and F.G. Yuan, Smart Mater. Struct. 17, 045009 (2008).10.1088/0964-1726/17/4/045009 ↗
12. J. Chen, G. Zhu, W. Yang, Q. Jing, P. Bai, Y. Yang, T.-C. Hou, and Z.L. Wang, Adv. Mater. 25, 6094 (2013).10.1002/adma.201302397 ↗
13. E. Fuentes-Fernandez, L. Baldenegro-Perez, M. Quevedo-Lopez, B. Gnade, A. Hande, P. Shah, and H.N. Alshareef, Solid-State Electron. 63, 89 (2011).10.1016/j.sse.2011.05.027 ↗
14. L.A. Baldenegro-Perez, W. Debray-Mechtaly, E. Fuentes-Fernandez, M.A. Quevedo-Lopez, H.N. Alshareef, P. Shah, and B.A. Gnade, Mater. Sci. Forum 644, 97 (2010).10.4028/www.scientific.net/MSF.644.97 ↗
15. E. Fuentes-Fernandez, W. Debray-Mechtaly, M.A. Quevedo-Lopez, B. Gnade, A. Rajasekaran, A. Hande, P. Shah, and H.N. Alshareef, J. Electron. Mater. 40, 85 (2011).10.1007/s11664-010-1407-x ↗
16. A. Hajati and S.-G. Kim, Appl. Phys. Lett. 99, 083105 (2011).10.1063/1.3629551 ↗
17. S.-H. Kim, Y.-S. Choi, C.-E. Kim, and D.-Y. Yang, Thin Solid Films 325, 72 (1998).10.1016/S0040-6090(98)00486-6 ↗
18. S. Priya, H.-W. Kim, and K. Uchino, J. Am. Ceram. Soc. 87, 1907 (2004).10.1111/j.1151-2916.2004.tb06339.x ↗
19. V. Raghunathan, C. Schurgers, P. Sung, and M.B. Srivastava, IEEE Signal Process. Mag. 19, 40 (2002).10.1109/79.985679 ↗
20. P.D. Mitcheson, T.C. Green, E.M. Yeatman, and A.S. Holmes, J. Microelectromech. Syst. 13, 429 (2004).10.1109/JMEMS.2004.830151 ↗
21. A. Erturk and D.J. Inman, Smart Mater. Struct. 18, 025009 (2009).10.1088/0964-1726/18/2/025009 ↗
22. W.J. Choi, Y. Jeon, J.H. Jeong, R. Sood, and S.G. Kim, J. Electroceram. 17, 543 (2006).10.1007/s10832-006-6287-3 ↗
23. W. Yang, J. Chen, G. Zhu, X. Wen, P. Bai, Y. Su, Y. Lin, and Z. Wang, Nano Res. 6, 880 (2013).10.1007/s12274-013-0364-0 ↗
24. S. Roundy and P.K. Wright, Smart Mater. Struct. 13, 1131 (2004).10.1088/0964-1726/13/5/018 ↗
25. Y.B. Jeon, R. Sood, J.h. Jeong, and S.G. Kim, Sens. Actuators A 122, 16 (2005).10.1016/j.sna.2004.12.032 ↗
26. H.N. Al-Shareef, K.R. Bellur, O. Auciello, X. Chen, and A.I. Kingon, Thin Solid Films 252, 38 (1994).10.1016/0040-6090(94)90822-2 ↗
27. E.M.A. Fuentes-Fernandez, W. Debray-Mechtaly, M.A. Quevedo-Lopez, B. Gnade, E. Leon-Salguero, P. Shah, and H.N. Alshareef, Smart Mater. Res. 2012, 9 (2012).
28. C. Zorman, M. Mehregany, Springer Handbook of Nanotechnology, ed. B. Bhushan, (Berlin: Springer, 2004), pp. 203.10.1007/3-540-29838-X_7 ↗
29. D. Dimos, M.V. Raymond, R.W. Schwartz, H.N. Al-Shareef, and C.H. Mueller, J. Electroceram. 1, 145 (1997).10.1023/A:1009924716633 ↗
30. G.W. Farnell, I.A. Cermak, P. Silverster, and S.K. Wong, IEEE Trans. Sonics Ultrason. Ind. Eng. Chem. 17, 188 (1970).10.1109/T-SU.1970.29560 ↗
31. H. Fan, S.-H. Lee, C.-B. Yoon, G.-T. Park, J.-J. Choi, and H.-E. Kim, J. Eur. Ceram. Soc. 22, 1699 (2002).10.1016/S0955-2219(01)00464-2 ↗
32. M.L. Calzada, M. Algueró, A. Santos, M. Stewart, M.G. Cain, and L. Pardo, J. Mater. Res. 24, 526 (2009).10.1557/JMR.2009.0045 ↗
33. T. Haccart, E. Cattan, and D. Remiens, Semicond. Phys. Quantum Electron. Optoelectron. 5, 78 (2002).10.15407/spqeo5.01.078 ↗
34. H. Xiyun, Z. Xia, Z. Xinsen, Q. Pinsun, C. Wenxiu, and D. Aili, J. Phys. Conf. Ser. 152, 012068 (2009).10.1088/1742-6596/152/1/012068 ↗
35. N. Wongdamnern, N. Triamnak, M. Unruan, K. Kanchiang, A. Ngamjarurojana, S. Ananta, Y. Laosiritaworn, and R. Yimnirun, Phys. Lett. A 374, 391 (2010).10.1016/j.physleta.2009.11.019 ↗
36. R. Yimnirun, N. Wongdamnern, N. Triamnak, M. Unruan, A. Ngamjarurojana, S. Ananta, and Y. Laosiritaworn, J. Appl. Phys. 103, 086105 (2008).10.1063/1.2907755 ↗
37. K. Tanaka, T. Kubota, and Y. Sakabe, Sens. Actuators A 96, 179 (2002).10.1016/S0924-4247(01)00791-9 ↗
38. P. Muralt, J. Appl. Phys. 100, 051605 (2006).
39. T. Maeder, P. Muralt, L. Sagalowicz, I. Reaney, M. Kohli, A. Kholkin, and N. Setter, Appl. Phys. Lett. 68, 776 (1996).10.1063/1.116529 ↗
40. P. Muralt, T. Maeder, L. Sagalowicz, S. Hiboux, S. Scalese, D. Naumovic, R.G. Agostino, N. Xanthopoulos, H.J. Mathieu, L. Patthey, and E.L. Bullock, J. Appl. Phys. 83, 3835 (1998).10.1063/1.366614 ↗
41. A. Katsuhiro, F. Yukio, N. Ken, and N. Akitoshi, Jpn. J. Appl. Phys. 34, 192 (1995).10.1143/JJAP.34.192 ↗
42. E. Schulz, Acta Polym. 31, 216 (1980).10.1002/actp.1980.010310319 ↗
43. H. Reiss, J. Chem. Phys. 18, 840 (1950).10.1063/1.1747784 ↗
44. M. Volmer and A. Weber, Z. Phys. Chem. 119, 277 (1925).
45. B.A. Tuttle, T.J. Garino, J.A. Voight, T.J. Headley, D. Dimos, and M.O. Eatough, Science and Technology of Electroceramic Thin Films (The Netherlands: Kluwer Academic Publishers, 1995), pp. 427–437.
46. S. Trolier-McKinstry and P. Muralt, J. Electroceram. 12, 7 (2004).10.1023/B:JECR.0000033998.72845.51 ↗
47. N. Kim, (Ph.D. thesis, The Pennsylvania State University, University Park, PA, 1994).
48. T.M. Shaw, S. Trolier-McKinstry, and P.C. McIntyre, Annu. Rev. Mater. Sci. 30, 263 (2000).10.1146/annurev.matsci.30.1.263 ↗
49. M.H. Frey and D.A. Payne, Phys. Rev. B 54, 3158 (1996).10.1103/PhysRevB.54.3158 ↗
50. G. Arlt, D. Hennings, and G. de With, J. Appl. Phys. 58, 1619 (1985).10.1063/1.336051 ↗
51. X. Tian-Bing, J.S. Emilie, K. Jin Ho, Z. Lei, Z. Wanlu, and T. Xiudong, J. Xiaoning Smart Mater. Struct. 22, 065015 (2013).10.1088/0964-1726/22/6/065015 ↗