journal article·2014-04

Multiscale Modeling of the Effect of Micro-alloying Mn and Sb on the Viscoplastic Response of SAC105 Solder

Subhasis Mukherjee, Abhijit Dasgupta, Bite Zhou, Thomas R. Bieler

Journal of Electronic Materials· Volume 43· Issue 4
Publisher page

Abstract

This study investigates the time-dependent viscoplastic response of two relatively new SAC105-X solders—SAC105-05Mn (Sn1.0Ag0.5Cu (SAC105) doped with 0.05 wt.% Mn), and SAC105-55Sb (SAC105 doped with 0.55 wt.% Sb). The results showed that the addition of Mn or Sb increases the creep resistance of SAC105 solder by one to two orders of magnitude at the tested stress levels of 2–20 MPa. The addition of Mn as a fourth alloying element promotes homogeneous distribution of micron-scale Cu6Sn5 intermetallic compounds (IMCs), thereby reducing their interparticle spacing as compared to that of SAC105. On the other hand, addition of Sb does not change the spacing of the Cu6Sn5 particle, but promotes the formation of uniformly sized Sn dendritic lobes, homogeneously distributed in the whole solder joint. Moreover, Sb also forms a solid solution with Sn and strengthens the Sn matrix in SAC105-55Sb itself. The effects of these microstructural changes (obtained using image processing) on the secondary creep constitutive response of SAC105 solder interconnects were then modeled using a mechanistic multiscale creep model. The mechanistic model was able to accurately capture the trends in the secondary creep constitutive response of the alloys and to explain the improvement in creep resistance of SAC105 due to the addition of Mn and Sb.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. T.R. Bieler, H. Jiang, L.P. Lehman, T. Kirkpatrick, and E.J. Cotts, Proceedings of 56th Electronic Components and Technology Conference (2006).
2. S. Terashima, T. Kohno, A. Mizusawa, K. Arai, O. Okada, T. Wakabayashi, M. Tanaka, and K. Tatsumi, J. Electron. Mater. 38, 33 (2008).10.1007/s11664-008-0560-y ↗
3. M. Lu, D.-Y. Shih, P. Lauro, C. Goldsmith, and D.W. Henderson, Appl. Phys. Lett. 92, 211909 (2008).10.1063/1.2936996 ↗
4. J. Li, T.T. Mattila, and J.K. Kivilahti, J. Electron. Mater. 39, 77 (2009).10.1007/s11664-009-0957-2 ↗
5. Y. Wang, K.H. Lu, V. Gupta, L. Stiborek, D. Shirley, J. Im, and P.S. Ho, IEEE 61st Electronic Components and Technology Conference, ECTC 2011 (2011), pp. 711–716.
6. K. Lee, K.-S. Kim, K. Yamanaka, Y. Tsukada, S. Kuritani, M. Ueshima, and K. Suganuma, IEEE CPMT Symposium Japan. (2010), pp. 1–410.1109/CPMTSYMPJ.2010.5679668 ↗
7. T.T. Mattila, E. Kaloinen, A. Syed, and J.K. Kivilahti, Proceedings of 57th. Electronic Components and Technology Conference, ECTC’07 (2007), pp. 381–390.
8. H. Kim, M. Zhang, C. M. Kumar, D. Suh, P. Liu, D. Kim, M. Xie, and Z. Wang, 57th Electronic Components and Technology Conference (ECTC’07 2007) (2007), pp. 962–967.
9. W.H. Zhu, L. Xu, J.H.L. Pang, X.R. Zhang, E. Poh, Y.F. Sun, A.Y.S. Sun, C.K. Wang, and H.B. Tan, 58th Electronic Components and Technology Conference, ECTC 2008 (2008), pp. 1667–1672.
10. K.S. Kim, S.H. Huh, and K. Suganuma, Microelectron. Reliab. 43, 259 (2003).10.1016/S0026-2714(02)00239-1 ↗
11. G.Y. Li, B.L. Chen, X.Q. Shi, S.C.K. Wong, and Z.F. Wang, Thin Solid Films 504, 421 (2006).10.1016/j.tsf.2005.09.060 ↗
12. B.L. Chen and G.Y. Li, Thin Solid Films 462–463, 395 (2004).10.1016/j.tsf.2004.05.063 ↗
13. B.L. Chen and G.Y. Li, IEEE Trans. Compon. Packag. Technol. 28, 534 (2005).10.1109/TCAPT.2005.848573 ↗
14. M. Amagai, Microelectron. Reliab. 48, 1 (2008).10.1016/j.microrel.2007.05.004 ↗
15. G.Y. Li, B.L. Chen, and J.N. Tey, IEEE Trans. Electron. Packag. Manuf. 27, 77 (2004).10.1109/TEPM.2004.830507 ↗
16. W. Liu, N.-C. Lee, A. Porras, M. Ding, A. Gallagher, A. Huang, S. Chen, and J. C.-B. Lee, 11th Electronics Packaging Technology Conference, EPTC ‘09 (2009), pp. 49–63.
17. W. Liu, N.-C. Lee, A. Porras, M. Ding, A. Gallagher, A. Huang, S. Chen, and J. C.-B. Lee, 59th Electronic Components and Technology Conference, ECTC 2009 (2009), pp. 994–1007.
18. W. Liu and N.-C. Lee, JOM 59, 26 (2007).10.1007/s11837-007-0085-5 ↗
19. Y.-R. Liu, J.-M. Song, Y.-S. Lai, and Y.-T. Chiu, 4th International Microsystems, Packaging, Assembly and Circuits Technology Conference (IMPACT 2009) (2009), pp. 501–504.
20. L.-W. Lin, J.-M. Song, Y.-S. Lai, Y.-T. Chiu, and N.-C. Lee, International Conference on Electronic Materials and Packaging (EMAP 2008), pp. 33–36.
21. Q. Zhang, A. Dasgupta, and P. Haswell, J. Electron. Mater. 33, 1338 (2004).10.1007/s11664-004-0163-1 ↗
22. N. Iosipescu, J. Mater. 2, 537 (1967).
23. T. Reinikainen, M. Poech, M. Krumm, and J. Kivilahti, J. Electron. Packag. 120, 106 (1998).10.1115/1.2792277 ↗
24. G. Cuddalorepatta, M. Williams, and A. Dasgupta, J. Electron. Mater. 39, 2292 (2010).10.1007/s11664-010-1296-z ↗
25. S. Mukherjee, T.T. Mattila, and A. Dasgupta, 13th IEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITHERM) (2012), pp. 888–89510.1109/ITHERM.2012.6231520 ↗
26. G. Cuddalorepatta and A. Dasgupta, Acta Mater. 58, 5989 (2010).10.1016/j.actamat.2010.07.016 ↗
27. L.P. Lehman, Y. Xing, T.R. Bieler, and E.J. Cotts, Acta Mater. 58, 3546 (2010).10.1016/j.actamat.2010.01.030 ↗
28. J. Rösler and M. Bäker, Acta Mater. 48, 3553 (2000).10.1016/S1359-6454(00)00109-9 ↗
29. N. Hamada, M. Hamada, T. Uesugi, Y. Takigawa, and K. Higashi, Mater. Trans. 51, 1747 (2010).10.2320/matertrans.MJ201023 ↗
30. S.N. Nasser and M. Hori, Micromechanics: Overall Properties of Heterogeneous Materials (Amsterdam: North-Holland, 1993).
31. M. Pei and J. Qu, J. Electron. Packag. 130, 031004 (2008).10.1115/1.2957321 ↗