Enhanced Anti-Corrosion Protection of Carbon Steel with Silica-Polypyrrole-Dodecyl Sulfate Incorporated into Epoxy Coating
Source abstract
Abstract
Nanocomposites based on silica, polypyrrole, and sodium dodecyl sulfate dopant (SiO2-PPy-DoS) were synthesized by an in situ polymerization method. The characterizations of the synthesized materials were analyzed using Fourier-transform infrared spectroscopy, energy dispersive x-ray analysis, scanning electron microscopy, thermal gravimetric analysis, and x-ray photoelectron spectroscopy. The results showed that the SiO2-PPy-DoS composite had spherical shape with size of around 250–500 nm. The electrical conductivity of the SiO2-PPy-DoS nanocomposite was measured to be around 0.287 S/cm, which was larger than that of SiO2-PPy (0.101 S/cm). An enhanced anti-corrosion protection of carbon steel substrate (CT3) using an epoxy coating containing SiO2-PPy-DoS was achieved with an impedance modulus value of 108 Ω cm−2 at 10 mHz after 840 h soaked in NaCl solution of 3%, indicating that DoS can be used as an additive to improve anti-corrosion capacity for carbon steel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications · Analytical Chemistry and Sensors · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. C.M. Hansson, Metall. Mater. Trans. A 42A, 2952 (2011).10.1007/s11661-011-0703-2 ↗
2. A. Popoola, O.E. Olorunniwo, and O.O. Ige, Developments in Corrosion Protection, ed. M. Aliofkhazraei (IntechOpen: Rijeka, 2014), p. 241.
3. S.S. Pathak, S.K. Mendon, M.D. Blanton, and J.W. Rawlins, Metals 2, 353 (2012).10.3390/met2030353 ↗
4. C. Edeleanu, Platin. Met. Rev. 4, 86 (1960).10.1595/003214060X438691 ↗
5. G. Williams, S. Geary, and H.N. McMurray, Corros. Sci. 57, 139 (2012).10.1016/j.corsci.2011.12.024 ↗
6. R. Vera, R. Schrebler, P. Greza, and H. Romero, Prog. Org. Coat. 77, 853 (2014).10.1016/j.porgcoat.2014.01.015 ↗
7. Y.W. Song, D.Y. Shan, and E.H. Han, Electrochim. Acta 53, 2135 (2008).10.1016/j.electacta.2007.09.026 ↗
8. R.R. Hussain, J. Civil Environ. Eng. (2014). https://doi.org/10.4172/2165-784X.1000e116 .10.4172/2165-784X.1000e116 ↗
9. S.D.A.S. Ramôa, G.M.O. Barra, C. Merlini, W.H. Schreiner, S. Livi, and B.G. Soares, Appl. Clay Sci. 104, 160 (2015).10.1016/j.clay.2014.11.026 ↗
10. E. Hur, G.O. Bereket, and Y.U. Sahin, Mater. Chem. Phys. 100, 19 (2006).10.1016/j.matchemphys.2005.11.034 ↗
11. J.G. Hyun, S.D. Cho, and K.W. Paik, J. Electron. Mater. 34, 1264 (2006).10.1007/s11664-005-0273-4 ↗
12. V.T.H. Vu, T.T.M. Dinh, N.T. Pham, T.T. Nguyen, P.T. Nguyen, and H.T.X. To, Int. J. Corros. (2018). https://doi.org/10.1155/2018/6395803/ .10.1155/2018/6395803/ ↗
13. V.T.H. Vu, N.T. Pham, T.T. Nguyen, P.T. Nguyen, H.T.X. To, and T.T.M. Dinh, Vietnam J. Chem. 55, 781 (2017).
14. V.T.H. Vu, H.T.X. To, N.T. Pham, P.T. Nguyen, T.T. Nguyen, D. Didier, and T.T.M. Dinh, J. Nanosci. Nanotech. (2018). https://doi.org/10.1166/jnn.2018.15198 .10.1166/jnn.2018.15198 ↗
15. N. Romyen, S. Thongyai, P. Praserthdam, and S. Wacharawichanant, J. Electron. Mater. 46, 6709 (2017).10.1007/s11664-017-5693-4 ↗
16. S. Konwer, R. Boruah, and S.K. Dolui, J. Electron. Mater. 40, 2448 (2011).10.1007/s11664-011-1749-z ↗
17. J. Wang, Y. Xu, X. Sun, S. Mao, and F. Xiao, J. Electrochem. Soc. 154, C445 (2007).10.1149/1.2746567 ↗
18. K. Yoshino, K. Kaneto, and S. Takeda, Synth. Met. 18, 741 (1987).10.1016/0379-6779(87)90972-6 ↗
19. M. Rohwerder, Int. J. Mat. Res. 100, 1331 (2009).10.3139/146.110205 ↗
20. N. Su, H.B. Li, S.J. Yuan, S.P. Yi, and E.Q. Yin, Expr. Polym. Lett. 6, 697 (2012).10.3144/expresspolymlett.2012.75 ↗
21. K. Qi, Y. Qiu, Z. Chen, and X. Guo, Corros. Sci. 60, 50 (2012).10.1016/j.corsci.2012.04.013 ↗
22. S.H. Yang, C.K. Yang, J.H. Yan, and C.M. Lin, J. Electron. Mater. 43, 3593 (2014).10.1007/s11664-014-3242-y ↗
23. Z. Xiang, Y. Wang, P. Ju, and D. Zhang, J. Electron. Mater. 46, 758 (2016).10.1007/s11664-016-4939-x ↗
24. M. Ramezani and S.M.H. Mashkani, J. Electron. Mater. 46, 1371 (2016).10.1007/s11664-016-5129-6 ↗
25. T.K.O. Vuong, D.L. Tran, T.T. Vu, T.L. Le, H.N. Pham, T.T. Le, H.M. Do, and X.P. Nguyen, J. Electron. Mater. 45, 4010 (2016).10.1007/s11664-016-4650-y ↗
26. T. Ohtsuka, Int. J. Corr. (2012). https://doi.org/10.1155/2012/915090 .10.1155/2012/915090 ↗
27. C.-H. Sha and C.C. Lee, J. Electron. Packag. 133, 021005 (2011).10.1115/1.4003990 ↗
28. ASTM-D4541, Standard test method for pull-off strength of coatings using portable adhesion testers (2010)
29. ASTM-D2794, Standard test method for resistance of organic coatings to the effects of rapid deformation (Impact) (2010)
30. F. Yang, Y. Chu, S. Ma, Y. Zhang, and J. Liu, J. Colloid Interface Sci. 301, 470 (2006).10.1016/j.jcis.2006.05.038 ↗
31. Y.D. Kim and G. Hong, Korean J. Chem. Eng. 29, 964 (2012).10.1007/s11814-011-0270-7 ↗
32. X. Liu, H. Wu, F. Ren, G. Qiu, and M. Tang, Mater. Chem. Phys. 109, 5 (2008).10.1016/j.matchemphys.2007.10.014 ↗
33. I.Y. Jeon, H.J. Choi, L.S. Tan, and J.B. Baek, J. Polym. Sci. 49, 2529 (2011).10.1002/pola.24684 ↗
34. W. Su and J.O. Iroh, Electrochim. Acta 44, 2173 (1999).10.1016/S0013-4686(98)00343-0 ↗
35. C. Yang, X. Wang, Y. Wang, and P. Liu, Powder Technol. 217, 134 (2012).10.1016/j.powtec.2011.10.019 ↗
36. N. Su, Nanoscale Res. Lett. 10, 301 (2015).10.1186/s11671-015-0997-x ↗
37. S.D.A.S. Ramôa, G.M.O. Barra, C. Merlini, W.H. Schreiner, S. Livi, and B.G. Soares, Appli. Clay Sci. 104, 160 (2015).10.1016/j.clay.2014.11.026 ↗
38. S. Konwer, R. Boruah, and S.K. Dolui, J. Electron. Mater. 40, 2248 (2011).10.1007/s11664-011-1749-z ↗
39. V. Schmidt, C. Giacomelli, and V. Soldi, Polym. Degrad. Stab. 87, 25 (2005).10.1016/j.polymdegradstab.2004.07.003 ↗
40. D. Kowalski, M. Ueda, and T. Ohtsuka, Corr. Sci. 49, 3442 (2007).10.1016/j.corsci.2007.03.007 ↗
41. A. Reung-u-rai, A. Prom-jun, W. Prissanaroon-ouajai, S. Ouajai, and J. Metals, Mater. Miner. 18, 27 (2008).
42. T. Liu, N. Liu, S. Zhai, S. Gao, Z. Xiao, Q. An, and D. Yang, J. Alloys Compd. 779, 831 (2019).10.1016/j.jallcom.2018.11.167 ↗
43. H. Veisi, B. Maleki, F.H. Eshbala, H. Veisi, R. Masti, S.S. Ashrafi, and M. Baghayeri, RSC Adv. 4, 30638 (2014).10.1039/C4RA04725G ↗
44. T.X.H. To, T.A. Nguyen, A.T. Trinh, V.T. Bui, H. Thai, T.M.T. Dinh, and S. Daopiset, J. Coat. Technol. Res. 13, 805 (2016).10.1007/s11998-016-9791-7 ↗
45. S. Abhijit and P.A. Mahanwar, Pigm. Resin Technol. 42, 317 (2013).10.1108/PRT-04-2011-0030 ↗