Sliding Mode Control for MPPT of a Thermogenerator
Source abstract
Abstract
This paper reports a practical implementation for maximum power point tracking (MPPT) of a thermoelectric generator (TEG) module using sliding mode control. The principal goal is to apply a robust technique of control to ensure maximum power transfer towards the load through a boost converter. On the one hand, the proposed technique improves rapidly the effect of load variation, and on the other hand, it increases the overall performance of the system. The MPPT control is modeled in Simulink/Matlab with the theoretical Models of a TEG module and a boost converter. Simulation results give the sliding mode control performance under different temperature gradients. Hardware based on an Arduino card is implemented, where the experimental results are presented and analyzed. The experimental results are compared with simulation data where a good agreement is observed. Finally, the results show the effectiveness and the robustness of sliding mode control.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Advanced Battery Technologies Research · Advanced Thermodynamic Systems and Engines
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. A. Paraskevas and E. Koutroulis, Energy. Convers. Manag. 108, 355 (2016).10.1016/j.enconman.2015.11.027 ↗
2. J.P. Im, S.W. Wang, S.T. Ryu, and G.H. Cho, IEEE J. Solid-State Circuits 47, 3055 (2012).10.1109/JSSC.2012.2225734 ↗
3. J. Kim and C. Kim, IEEE Trans. Power Electron. 28, 3827 (2013).10.1109/TPEL.2012.2231098 ↗
4. N. Phillip, O. Maganga, K.J. Burnham, M.A. Ellis, S. Robinson, J. Dunn, and C. Rouaud, J. Electron. Mater. 42, 1900 (2013).10.1007/s11664-012-2460-4 ↗
5. S. Dalola, M. Ferrari, V. Ferrari, M. Guizzetti, D. Marioli, and A. Taroni, IEEE Trans. Instrum. Meas. 58, 99 (2009).10.1109/TIM.2008.928405 ↗
6. P.S. Weng, H.Y. Tang, P.C. Ku, and L.H. Lu, IEEE J. Solid-State Circuits 48, 1031 (2013).10.1109/JSSC.2013.2237998 ↗
7. E. Brownell and M. Hodes, IEEE Trans. Comp. Packag. Manuf. Technol. 4, 612 (2014).10.1109/TCPMT.2013.2295169 ↗
8. K. Dahech, M. Allouche, T. Damak, and F. Tadeo, Electr. Power Syst. Res. 143, 182 (2017).10.1016/j.epsr.2016.10.043 ↗
9. D. Galayko and P. Basset, in Proceedings of Power MEMS 2008 + microEMS, Sendai, Japan, 2008, pp. 9–12.
10. J.D. Park, H. Lee, and M. Bond, Energy Convers. Manag. 86, 233 (2014).10.1016/j.enconman.2014.05.027 ↗
11. A. Montecucco and A.R. Knox, IEEE Trans. Power Electron. 30, 828 (2015).10.1109/TPEL.2014.2313294 ↗
12. J. Eakburanawat and I. Boonyaroonate, Appl. Energy 83, 687 (2006).10.1016/j.apenergy.2005.06.004 ↗
13. C.E. Kinsella, S.M. O’Shaughnessy, M.J. Deasy, M. Duffy, and A.J. Robinson, Appl. Energy 114, 80 (2014).10.1016/j.apenergy.2013.09.025 ↗
14. S. Benahdouga, R. Khenfer, M. Meddad, A. Eddiai, and K. Benkhouja, Mol. Cryst. Liq. Cryst. 628, 41 (2016).10.1080/15421406.2015.1137124 ↗
15. S.B. Riffat and X. Ma, Appl. Therm. Eng. 23, 913 (2003).10.1016/S1359-4311(03)00012-7 ↗
16. D. Dai, Y. Zhou, and J. Liu, Renew. Energy 36, 3530 (2011).10.1016/j.renene.2011.06.012 ↗
17. S.F. Tie and C.W. Tan, Renew. Sustain. Energy Rev. 20, 82 (2013).10.1016/j.rser.2012.11.077 ↗
18. K.R. Ullah, R. Saidur, H.W. Ping, R.K. Akikur, and N.H. Shuvo, Renew. Sustain. Energy Rev. 24, 499 (2013).10.1016/j.rser.2013.03.024 ↗
19. B.D.O. Anderson and J.B. Moore, Linear Optimal Control (Englewood Cliffs, NJ: Prentice-Hall, Inc., 1971).
20. Y. Yang, X.J. Wei, and J. Liu, J. Phys. D Appl. Phys. 40, 5790 (2007).10.1088/0022-3727/40/18/042 ↗
21. C. Wu, Appl. Therm. Eng. 16, 63 (1996).10.1016/1359-4311(95)00014-5 ↗
22. Y.Y. Hsiao, W.C. Chang, and S.L. Chen, Energy 35, 1447 (2010).10.1016/j.energy.2009.11.030 ↗
23. X. Gou, H. Xiao, and S. Yang, Appl. Energy 87, 3131 (2010).10.1016/j.apenergy.2010.02.013 ↗
24. R. Yang, G. Chen, A.R. Kumar, G.J. Snyder, and J.P. Fleurial, Energy Convers. Manag. 46, 1407 (2005).10.1016/j.enconman.2004.07.004 ↗
25. K. Yazawa and A. Shakouri, Environ. Sci. Technol. 45, 7548 (2011).10.1021/es2005418 ↗
26. D. Nemir and J. Beck, J. Electron. Mater. 39, 1897 (2010).10.1007/s11664-009-1060-4 ↗
27. L. Janak, Z. Ancik, and Z. Hadas, Mechatronics 2013, ed. T. Brˇezina and R. Jablonski (Cham: Springer, 2014), pp. 265–271.10.1007/978-3-319-02294-9_34 ↗
28. S. Benahdouga, D. Boukhetala, and F. Boudjema, Electr. Power Energy Syst. 43, 1081 (2012).10.1016/j.ijepes.2012.06.018 ↗
29. J. Ghazanfari and M.M. Farsangi, Iran. J. Electric. Electron. Eng. 9, 189 (2013).
30. A. Prabhakaran and A.S. Mathew, Int. Res. J. Eng. Technol. 3, 1600 (2016).
31. D. Rekioua, A.Y. Achour, and T. Rekioua, Energy Proc. 36, 219 (2013).10.1016/j.egypro.2013.07.025 ↗
32. T.H. Kwan and X. Wu, Energy Proc. 105, 14 (2017).10.1016/j.egypro.2017.03.274 ↗