journal article·2019-04

Development of the Automotive Thermoelectric Generator Electrical Network

Pavel Shiriaev, Konstantin Shishov, Alexey Osipkov, Leonid Tishchenko

Journal of Electronic Materials· Volume 48· Issue 4
Publisher page

Abstract

The automotive thermoelectric generator (ATEG) produces electrical power by converting heat energy of engine exhaust gasses. The transfer of this electrical energy to a vehicle’s electrical system should be done with minimum losses. The electrical parameters of thermoelectric modules (TEMs), which are installed in the ATEG, are changing due to non-stationary ATEG operating conditions. This fact leads to a mismatch between ATEG resistance and equivalent electrical load resistance, causing the issue of generating maximum energy. One potential solution to this problem is a maximum power point tracking (MPPT) method. MPPT controllers provide harvesting maximum power from the ATEG. In this way, MPPT application is required for thermoelectric systems with variable heat flow. However, any MPPT controller has its own conversion losses, which affect overall ATEG system efficiency. These losses depend on MPPT controller working conditions, i.e. TEMs output voltages and currents. Therefore, the simulation of the electrical circuit should be done during driving cycles to evaluate the total efficiency of the entire system. This evaluation helps to estimate the effectiveness of each element of the electrical network. In this paper, we elaborate our theoretical and experimental studies of the ATEG electrical network and do comprehensive discussion over the design for it.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advanced Thermoelectric Materials and Devices · Vehicle emissions and performance

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. G. Fontaras, N.-G. Zacharof, and B. Ciuffo, Prog. Energy Combust. Sci. 60, 97 (2017).10.1016/j.pecs.2016.12.004 ↗
2. STATISTA International Car Sales 1990–2018 Statistic, https://www.statista.com/statistics/200002/international-car-sales-since-1990/ . Accessed 30 July 2018.
3. G.B. Hamra, F. Laden, A.J. Cohen, O. Raaschou-Nielsen, M. Brauer, and D. Loomis, Environ. Health Perspect. 123, 1107 (2015).10.1289/ehp.1408882 ↗
4. F. An, R. Earley, and L. Green-Weiskel, Global overview on fuel efficiency and motor vehicle emission standards: policy options and perspectives for international cooperation. (United Nations, Department of Economic and Social Affairs, Commission on Sustainable Development Nineteenth Session New York, 2–13 May 2011. Background paper, No. 3, CSD19/2011/BP3), http://graenaorkan.is.w7.nethonnun.is/wp-content/uploads/2011/10/Background-paper3-transport1.pdf . Accessed 30 July 2018.
5. M. Hatami, D. Ganji, and M. Gorji-Bandpy, Renew. Sustain. Energy Rev. 37, 168 (2014).10.1016/j.rser.2014.05.004 ↗
6. A. Osipkov, R. Poshekhonov, K. Shishov, and P. Shiriaev, Bringing Thermoelectricity into Reality, ed. P. Aranguren (London: IntechOpen, 2018), p. 185.
7. R.A. Poshekhonov, G.A. Arutyunyan, S.A. Pankratov, A.S. Osipkov, D.O. Onishchenko, and A.I. Leontyev, Semiconductors 51, 981 (2017).10.1134/S1063782617080255 ↗
8. D.O. Onishchenko, S.A. Pankratov, A.A. Zotov, A.S. Osipkov, and R.A. Poshekhonov, Int. J. Appl. Eng. Res. 12, 721 (2017).
9. A.I. Leontiev, R.Z. Kavtaradze, D.O. Onishchenko, A.S. Golosov, and S.A. Pankratov, High Temp. 54, 105 (2016).10.1134/S0018151X16010053 ↗
10. R.A. Poshekhonov, A.S. Osipkov, and M.O. Makeev, Glob. J. Pure Appl. Math. 12, 677 (2016).
11. A.I. Leontyev, D.O. Onishchenko, and G.A. Arutyunyan, Thermophys. Aeromech. 23, 747 (2016).10.1134/S0869864316050139 ↗
12. A. Osipkov, R. Poshekhonov, G. Arutyunyan, A. Basov, and R. Safonov, J. Electron. Mater. 46, 6195 (2017).10.1007/s11664-017-5652-0 ↗
13. L.I. Anatychuk and R.V. Kuz, Computer Designing and Test Results of Automotive Thermoelectric Generator. Thermoelectrics Goes Automotive (Renningen: Thermoelektrik II expert Verlag, IAV, 2011).
14. D. Tatarinov, M. Koppers, G. Bastian, and D. Schramm, J. Electron. Mater. 42, 2274 (2013).10.1007/s11664-013-2642-8 ↗
15. S. Yu, Q. Du, H. Diao, G. Shu, and K. Jiao, Energy Convers. Manag. 96, 363 (2015).10.1016/j.enconman.2015.03.002 ↗
16. W. Fang, S. Quan, C. Xie, X. Tang, L. Wang, and L. Huang, J. Electron. Mater. 45, 1613 (2015).10.1007/s11664-015-4130-9 ↗
17. D. Mitrani, J. Tome, J. Salazar, A. Turo, M. Garcia, and J. Chavez, IEEE Trans. Instrum. Meas. 54, 1548 (2005).10.1109/TIM.2005.851473 ↗
18. A. Montecucco, J. Siviter, and A.R. Knox, Appl. Energy 123, 47 (2014).10.1016/j.apenergy.2014.02.030 ↗
19. N. Femia, G. Petrone, G. Spagnuolo, and M. Vitelli, IEEE Trans. Power Electron. 20, 963 (2005).10.1109/TPEL.2005.850975 ↗
20. M.K. Kazimierczuk, Pulse-Width Modulated DC–DC Power Converters, 2nd ed. (Chichester: Wiley, 2016).
21. D. Schelle and J. Castorena, Power Electron. Technol. 46–53 (2006).
22. D. Linden, Handbook of Batteries (New York: McGraw-Hill, 1995).
23. D. Jänsch, J. Lauterbach, M. Pohle, and P. Steinberg, in Conference of Energy and Thermal Management, Air Conditioning, Waste Heat Recovery (2016), pp. 116–143.
24. V. Jovovic, Thermoelectric Waste Heat Recovery Program for Passenger Vehicles, https://www.osti.gov/servlets/purl/1337561 . Accessed 31 July 2018.
25. I. Arsie, A. Cricchio, C. Pianese, V. Ricciardi, and M.D. Cesare, Energy Procedia 82, 81 (2015).10.1016/j.egypro.2015.11.886 ↗
26. R. Kühn, O. Koeppen, P. Schulze, and D. Jänsch, Mater. Today: Proc. 2, 761 (2015).10.1016/j.matpr.2015.05.096 ↗
27. J. Merkisz, P. Fuc, P. Lijewski, A. Ziolkowski, and K.T. Wojciechowski, J. Electron. Mater. 47, 3059 (2018).10.1007/s11664-018-6125-9 ↗
28. R. Quan, Appl. Mech. Mater. 700, 694 (2014).10.4028/www.scientific.net/AMM.700.694 ↗
29. R.R. Gopi and S. Sreejith, Renew. Sustain. Energy Rev. 94, 1 (2018).10.1016/j.rser.2018.05.047 ↗