journal article·2019-01

Optimization of Thermoelectric Properties of Mechanically Alloyed p-Type SiGe by Mathematical Modelling

Sajid Ahmad, Ajay Singh, Ranita Basu, Satish Vitta, K. P. Muthe, S. C. Gadkari, S. K. Gupta

Journal of Electronic Materials· Volume 48· Issue 1
Publisher page

Abstract

Silicon germanium (SiGe) is a conventional high temperature thermoelectric material, which is usually synthesized through a mechanical alloying route using a ball mill, followed by sintering using a vacuum hot press for fabrication of dense bulk samples. The milling time and sintering temperature are two important parameters that have a major influence on the thermoelectric properties of synthesized samples. In the present work, a simulation technique (i.e., response surface analysis) was employed to study the effect of milling time and sintering temperature on the thermoelectric properties of p-type SiGe. The statistical optimisation of thermoelectric properties was performed using the central composite rotatable design. The responses like electrical resistivity, thermal conductivity, Seebeck coefficient, power factor and the figure-of-merit (ZT) of p-type SiGe alloys were evaluated. The experimental data was fitted to a second order polynomial model and the fitted model was evaluated by regression analysis and analysis of variance (ANOVA). A surprising finding of the analysis is that all responses are optimized at similar values of hot press temperature and ball milling times. There was a model predicted optimum value of ZT = 1.148 at sintering temperature of 1504.5 K and ball milling time of 53.6 h.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal properties of materials · Thermal Radiation and Cooling Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. E.A. Skrabek and D.S. Trimmer, CRC Handbook of Thermoelectrics, ed. D.M. Rowe (Boca Raton: CRC Press, 1995),
2. T.M. Tritt and M.A. Subramanian, MRS Bull. 31, 188 (2006).10.1557/mrs2006.44 ↗
3. T.M. Tritt, eds., Semiconductors and Semimetals, Vol. 69–71 (San Diego: Academic, 2001).
4. C.M. Bhandari and D.M. Rowe, Contemp. Phys. 21, 219 (1980).10.1080/00107518008210957 ↗
5. R.G. Lange and W.P. Carroll, Energy Convers. Manag. 49, 393 (2008).10.1016/j.enconman.2007.10.028 ↗
6. D.M. Rowe, Appl. Energy 40, 241 (1991).10.1016/0306-2619(91)90020-X ↗
7. A. Lahwal, X. Zeng, S. Bhattacharya, M. Zhou, D. Hitchcock, M. Karakaya, J. He, A.M. Rao, and T.M. Tritt, Energies 8, 10958 (2015).10.3390/en81010958 ↗
8. X.W. Wang, H. Lee, Y.C. Lan, G.H. Zhu, G. Joshi, D.Z. Wang, J. Yang, A.J. Muto, M.Y. Tang, J. Klatsky, S. Song, M.S. Dresselhaus, G. Chen, and Z.F. Ren, Appl. Phys. Lett. 93, 193121 (2008).10.1063/1.3027060 ↗
9. G. Joshi, H. Lee, Y.C. Lan, X.W. Wang, G.H. Zhu, D.Z. Wang, R.W. Gould, D.C. Cuff, M.Y. Tang, M.S. Dresselhaus, G. Chen, and Z. Ren, Nano Lett. 8, 4670 (2008).10.1021/nl8026795 ↗
10. R. Basu, S. Bhattacharya, R. Bhatt, M. Roy, S. Ahmad, A. Singh, M. Navaneethan, Y. Hayakawa, D.K. Aswal, and S.K. Gupta, J. Mater. Chem. A 2, 6922 (2014).10.1039/c3ta14259k ↗
11. S. Ahmad, A. Singh, A. Bohra, R. Basu, S. Bhattacharya, R. Bhatt, K.N. Meshram, M. Roy, S.K. Sarkar, Y. Hayakawa, A.K. Debnath, D.K. Aswal, and S.K. Gupta, Nano Energy 27, 282 (2016).10.1016/j.nanoen.2016.07.002 ↗
12. J.P. Dismukes, L. Ekstrom, E.F. Steigmeier, I. Kudman, and D.S. Beers, J. Appl. Phys. 35, 2899 (1964).10.1063/1.1713126 ↗
13. M. Zehbarjadi, G. Joshi, G. Zhu, B. Yu, A. Minnich, Y.C. Lan, X. Wang, M.S. Dresselhaus, Z. Ren, and G. Chen, Nano Lett. 11, 2225 (2011).10.1021/nl201206d ↗
14. B. Yu, M. Zebarjadi, H. Wang, K. Lukas, H. Wang, D. Wang, C. Opeil, M. Dresselhaus, G. Chen, and Z. Ren, Nano Lett. 12, 2077 (2012).10.1021/nl3003045 ↗
15. J.A. Perez-Taborda, M.M. Rojo, J. Maiz, N. Neophytou, and M.M. Gonzalez, Sci. Rep. 6, 32778 (2016).10.1038/srep32778 ↗
16. Z. Zamanipour, X. Shi, A.M. Dehkordi, J.S. Krasinski, and D. Vashaee, Phys. Status Solidi A 209, 2049 (2012).10.1002/pssa.201228102 ↗
17. J. Schilz and V.N. Romanenko, J. Mater. Sci.: Mater. Electron. 6, 265 (1995).
18. R.M. Davis and C.C. Koch, Metallurgia 21, 305 (1987).
19. J. Schilz, M. Riffel, K. Pixiusa, and H.J. Meyer, Powder Technol. 105, 149 (1999).10.1016/S0032-5910(99)00130-8 ↗
20. L. Lu, M.O. Lai, and S. Zhang, J. Mater. Process. Technol. 67, 100 (1997).10.1016/S0924-0136(96)02826-9 ↗
21. M.H. Elsheikh, D.A. Shnawah, M.F.M. Sabri, S.B.M. Said, M.H. Hassan, M.B.A. Bashir, and M. Mohamad, Renew. Sustain. Energy Rev. 30, 337 (2014).10.1016/j.rser.2013.10.027 ↗
22. Z. Rizlan and O. Mamat, Chin. J. Eng., 802459 (2014).10.1155/2014/802459 ↗
23. M. Abdellahia and M. Bahmanpour, Mater. Res. 17, 781 (2014).10.1590/S1516-14392014005000023 ↗
24. A. Asfaram, M. Ghaedi, S. Agarwal, I. Tyagi, and V.K. Gupta, RSC Adv. 5, 18438 (2015).10.1039/C4RA15637D ↗
25. S. Lakshmanan and M. Kumar, Int. J. Eng. Sci. Innov. Technol. 2, 64 (2013).
26. N.S.M. El-Tayeb, T.C. Yap, V.C. Venkatesh, and P.V. Brevern, Mater. Des. 30, 4023 (2009).10.1016/j.matdes.2009.05.020 ↗
27. K. Dass and S.R. Chauhan, Mater. Manuf. Processes 27, 531 (2012).10.1080/10426914.2011.593236 ↗
28. M. Mia, M.A. Khan, and N.R. Dhar, Int. J. Adv. Manuf. Technol. 93, 975 (2017).10.1007/s00170-017-0566-9 ↗
29. S. Bathula, J. Mula, B.G. Bhasker, N.K. Singh, K. Tyagi, A.K. Srivastava, and A. Dhar, Nanoscale 7, 12474 (2015).10.1039/C5NR01786F ↗