Full Sputtering Deposition of Thin Film Solar Cells: A Way of Achieving High Efficiency Sustainable Tandem Cells?
Source abstract
Abstract
In the first part of this paper, we will show that a sputtering-based fabrication process exhibiting a low environmental footprint has been developed for the fabrication of copper indium gallium selenide (CIGS) absorbing material. Its originality lies in using room temperature sputtering in a pulsed—direct current mode of a single quaternary target followed by a post-anneal. At any stage of the process, selenium or sulfur atmosphere is used. Inert gas is used, respectively argon and a forming gas, for the deposition and annealing step, respectively. CIGS cells have been fabricated using such an absorbing layer. They exhibit an efficiency close to 12%. A tandem cell approach, using a thin film technology in conjunction with the well-established Si technology, is a promising technique, achieving cells with 30%, and higher, efficiency. Such cells are awaited, jointly with a stronger implementation of low environmental footprint technologies, as a vision for 2030. In the first section, sputtering technique has shown its ability to be developed in such a way achieving an environmentally friendly process that can be moreover compatible to be co-integrated with, for example, Si technology. In a second section, we will present a prospective discussion on the materials that can be applied to produce a sustainable approach for such a tandem cell configuration.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. M.A. Green (ed.), Silicon solar cells, advanced principles and practice, University of New South Wales Sydney, N.S.W. 2052 (Bridge Printery Sydney, 1995). ISBN 0-7334-0994-6
2. New world record for solar cell efficiency at 46% French–German cooperation confirms competitive advantage of European photovoltaic industry: https://www.ise.fraunhofer. de/en/press-and-media/press-releases/press-releases-2014/ new-world-record-for-solar-cell-efficiency-at-46-percent . Accessed 28 Sept 2016
3. S. Albrecht, M. Saliba, J.P. Correa Baena, F. Lang, L. Kegelmann, M. Mews, L. Steier, A. Abate, J. Rappich, L. Korte, R. Schlatmann, M. Khaja Nazeeruddin, A. Hagfeldt, M. Grätzel, and B. Rech, Energy Environ. Sci. 9, 81 (2016).10.1039/C5EE02965A ↗
4. MiaSolé: http://miasole.com/ , Accessed 28 Sept 2016
5. Solar frontier. http://www.solar-frontier.com/eng/ . Accessed 28 Sept 2016
6. Avancis, company, vision and history. http://www.avancis. de/en/company/vision-and-history/ . Accessed 28 Sept 2016
7. B. Ayachi, T. Aviles, J.-P. Vilcot, and C. Sion, Appl. Surf. Sci. 366, 53 (2016).10.1016/j.apsusc.2016.01.054 ↗
8. European Commission, report on critical raw materials for␣the EU, http://ec.europa.eu/docsroom/documents/10010/ attachments/1/translations/fen/renditions/native&usg=afqjcn ef6skhherpeb2gxs_dxbbftlw_7a . Accessed 15 Nov 2016
9. S. Essig, S. Ward, M.A. Steiner, D.J. Friedman, J.F. Geisz, P. Stradins, and D.L. Young, Energy Procedia 77, 464 (2015).10.1016/j.egypro.2015.07.066 ↗
10. O. Durand, S. Almosni, C. Cornet, A. Létoublon, C. Levallois, A. Rolland, J. Even, P. Rale, L. Lombez, and J.-F. Guillemoles, Sol Alternat Energy SPIE Newsroom (2015). doi: 10.1117/2.1201503.005793 .10.1117/2.1201503.005793 ↗
11. T.P. White, N.N. Lal, and K.R. Catchpole, IEEE J. Photovolt. 4, 208 (2014).10.1109/JPHOTOV.2013.2283342 ↗
12. Y. Hinuma, T. Hatakeyama, Y. Kumagai, L.A. Burton, H. Sato, Y. Muraba, S. Iimura, H. Hiramatsu, I. Tanaka, H. Hosono, and F. Oba, Nat. Commun. 7, 11962 (2016).10.1038/ncomms11962 ↗
13. A. Punya, W.R. Lambrecht, and M. van Schilfgaarde, Phys. Rev. B 84, 165204 (2011).10.1103/PhysRevB.84.165204 ↗
14. N. Feldberg, B. Keen, J.D. Aldous, D.O. Scanlon, P.A. Stampe, R.J. Kennedy, R.J. Reeves, T.D. Veal, and S.M. Durbin, in Proceedings of 38th IEEE PVSC (2012), pp. 2524–2527.
15. L. Lahourcade, N.C. Coronel, K.T. Delaney, S.K. Shukla, N.A. Spaldin, and H.A. Atwater, Adv. Mater. 25, 2562 (2013).10.1002/adma.201204718 ↗
16. P.C. Quayle, K. He, J. Shan, and K. Kash, MRS Commun. 3, 135 (2013).10.1557/mrc.2013.19 ↗
17. A. Punya and W.R.L. Albrecht, Phys. Rev. B 88, 075302 (2013).10.1103/PhysRevB.88.075302 ↗
18. F. Deng, H. Cao, L. Liang, J. Li, J. Gao, H. Zhang, R. Qin, and C. Liu, Opt. Lett. 40, 1282 (2015).10.1364/OL.40.001282 ↗
19. A.N. Fioretti, A. Zakutayev, H. Moutinho, C. Melamed, J.D. Perkins, A.G. Norman, M. Al-Jassim, E.S. Toberer, and A.C. Tamboli, J. Mater. Chem. C 3, 11017 (2015).10.1039/C5TC02663F ↗
20. T.D. Veal, N. Feldberg, N.F. Quackenbush, W.M. Linhart, D.O. Scanlon, L.F.J. Piper, and S.M. Durbin, Adv. Energy Mater. 5, 1501462 (2015).10.1002/aenm.201501462 ↗
21. A.M. Shing, N.C. Coronel, N.S. Lewis, and H.A. Atwater, Appl. Phys. Lett. Mater. 3, 076104 (2015).
22. R. Qin, H. Cao, L. Liang, Y. Xie, F. Zhuge, H. Zhang, J. Gao, K. Javaid, C. Liu, and W. Sun, Appl. Phys. Lett. 108, 142104 (2016).10.1063/1.4945728 ↗
23. T. Omata, H. Nagatani, I. Suzuki, and M. Kita, Sci. Technol. Adv. Mater. 16, 024902 (2015).10.1088/1468-6996/16/2/024902 ↗
24. T.C. Than, B.T. Bui, B. Wegmuller, M.H. Nguyen, L.H.H. Ngoc, V.D. Bui, Q.H. Nguyen, C.H. Hoang, and T. Nguyen-Tran, J. Electron. Mater. 45, 2407–2414 (2016).10.1007/s11664-016-4353-4 ↗