Thickness Dependent Structural and Dielectric Properties of Calcium Copper Titanate Thin Films Produced by Spin-Coating Method for Microelectronic Devices
Source abstract
Abstract
Calcium copper titanate (CaCu3Ti4O12, CCTO) thin films have been deposited on platinized silicon [(111)Pt/Ti/SiO2/Si] substrate through a sol–gel spin coating technique and annealed at 600–900°C with a variation of 100°C per sample for 3 h. The activation energy for crystalline growth, as well as optimal annealing temperature (900°C) of the CCTO crystallites was studied by x-ray diffraction analysis (XRD). Thickness dependent structural, morphological, and optical properties of CCTO thin films were observed. The field emission scanning electron microscopy (FE-SEM) verified that the CCTO thin films are uniform, fully covered, densely packed, and the particle size was found to be increased with film thickness. Meanwhile, quantitative analysis of dielectric properties (interfacial capacitance, dead layers, and bulk dielectric constant) of CCTO thin film with metal–insulator–metal (M–I–M) structures has been investigated systematically using a series capacitor model. Room temperature dielectric properties of all the samples exhibit dispersion at low frequencies, which can be explained based on Maxwell–Wagner two-layer models and Koop’s theory. It was found that the 483 nm thick CCTO film represents a high dielectric constant (e r = 3334), low loss (tan δ = 3.54), capacitance (C = 4951 nF), which might satisfy the requirements of embedded capacitor.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dielectric properties of ceramics · Ferroelectric and Piezoelectric Materials · Multiferroics and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. A. Norshamira and M. Mariatti, in AIP Conference Proceedings (2015), pp. 020021–020021-6.10.1063/1.4919159 ↗
2. H. Wang, F. Dai, D. Guidotti, Y. Lv, L. Cao and L. Wan, in 11th International Conference on Electronic Packaging Technology & High Density Packaging (2010), pp. 843–846.
3. W. Chen, K.G. McCarthy, A. Mathewson, M. Copuroglu, S. O’Brien, and R. Winfield, IEEE Electron Device Lett. 31, 996 (2010).10.1109/LED.2010.2052585 ↗
4. M. Li, X.L. Chen, D.F. Zhang, W.Y. Wang, and W.J. Wang, Sens. Actuators, B 147, 447 (2010).10.1016/j.snb.2010.03.063 ↗
5. C.C. Homes, T. Vogt, S.M. Shapiro, S. Wakimoto, and A.P. Ramirez, Sciebce 293, 673 (2001).
6. S. Krohns, P. Lunkenheimer, S.G. Ebbinghaus, and A. Loidl, Appl. Phys. Lett. 91, 022910 (2007).10.1063/1.2757098 ↗
7. D.C. Sinclair, T.B. Adams, F.D. Morrison, and A.R. West, Appl. Phys. Lett. 80, 2153 (2002).10.1063/1.1463211 ↗
8. P. Thomas, K. Dwarakanath, and K.B.R. Varma, J. Eur. Ceram. Soc. 32, 1681 (2012).10.1016/j.jeurceramsoc.2011.12.019 ↗
9. Y.Q. Dai, J.M. Dai, X.W. Tang, K.J. Zhang, X.B. Zhu, J. Yang, and Y.P. Sun, J. Alloys Compd. 587, 681 (2014).10.1016/j.jallcom.2013.11.026 ↗
10. D.P. Singh, Y.N. Mohapatra, and D.C. Agrawal, Mater. Sci. Eng., B 157, 58 (2009).10.1016/j.mseb.2008.12.017 ↗
11. S. Jesurani, S. Kanagesan, R. Velmurugan, C. Thirupathi, M. Sivakumar, and T. Kalaivani, Mater. Lett. 65, 3305 (2011).10.1016/j.matlet.2011.06.107 ↗
12. S. Jesurani, S. Kanagesan, M. Hashim, and I. Ismail, J. Alloys Compd. 551, 456 (2013).10.1016/j.jallcom.2012.11.043 ↗
13. M.M. Collinson, Handbook of Advanced Electronic and Photonic Materials and Devices, ed. H.S. Nalwa (Burlington: Academic Press, 2001), p. 163.10.1016/B978-012513745-4/50047-0 ↗
14. L.C. Chang, D.Y. Lee, C.C. Ho, and B.S. Chiou, Thin Solid Films 516, 454 (2007).10.1016/j.tsf.2007.07.009 ↗
15. M. Aspelmeyer, U. Klemradt, W. Hartner, H. Bachhofer, and G. Schindler, J. Phys. D Appl. Phys. 34, A173 (2001).10.1088/0022-3727/34/10A/336 ↗
16. M. Yuichi, H. Masahiko, K. Yukihiro, M. Hideo, and F. Yoshihisa, Jpn. J. Appl. Phys. 37, L465 (1998).10.1143/JJAP.37.L465 ↗
17. A.A. Felix, J.L.M. Rupp, J.A. Varela, and M.O. Orlandi, J. Appl. Phys. 112, 054512 (2012).10.1063/1.4751344 ↗
18. Y. Cao, Q. Di, L. Zhu, A. Li, and D. Wu, Adv. Mater. Sci. Eng. 2015, 1 (2015).
19. E.A. Paisley, M.D. Losego, S.M. Aygun, H.S. Craft, and J.P. Maria, J. Appl. Phys. 104, 114110 (2008).10.1063/1.3033166 ↗
20. S. Guillemet-Fritsch, T. Lebey, M. Boulos, and B. Durand, J. Eur. Ceram. Soc. 26, 1245 (2006).10.1016/j.jeurceramsoc.2005.01.055 ↗
21. M.G. Scott, Amorphous Metallic Alloys, ed. F.E. Luborsky (London: Butterworths, 1983), p. 144.10.1016/B978-0-408-11030-3.50015-7 ↗
22. S.K. Gupta and V.K. Srivatsava, J. Phys. Chem. Solids 37, 975 (1976).10.1016/0022-3697(76)90119-0 ↗
23. T. Pandirengan, M. Arumugam, and M. Durairaj, Int. J. Mater. Res. 106, 1189 (2015).10.3139/146.111294 ↗
24. R. Parra, E. Joanni, J.W.M. Espinosa, R. Tararam, M. Cilense, P.R. Bueno, J.A. Varela, and E. Longo, J. Am. Ceram. Soc. 91, 4162 (2008).10.1111/j.1551-2916.2008.02817.x ↗
25. B. Marí, F.J. Manjon, M. Mollar, J. Cembrero, and R. Gomez, Appl. Surf. Sci. 252, 2826 (2006).10.1016/j.apsusc.2005.04.024 ↗
26. M. Clugston and R. Fleming, Advanced Chemistry, 1st ed. (Oxford: Oxford University Press, 2000), pp. 585–586.
27. D.W. Kim, R. Balakrishnaiah, S.S. Yi, K.D. Kim, S.H. Kim, K. Jang, H.S. Lee, and J.H. Jeong, ECS Trans. 16, 13 (2009).10.1149/1.3106667 ↗
28. P. Barber, S. Balasubramanian, Y. Anguchamy, S. Gong, A. Wibowo, H. Gao, H. Ploehn, and H.C. Zur Loye, Materials 2, 1697 (2009).10.3390/ma2041697 ↗
29. Y. Su and W.J. Zhang, Wuhan Univ. Technol. Mater. Sci. Ed. 28, 343 (2013).10.1007/s11595-013-0691-8 ↗
30. Y.W. Li, Y.D. Shen, Z.G. Hu, F.Y. Yue, and J.H. Chu, Phys. Lett. A 373, 2389 (2009).10.1016/j.physleta.2009.05.001 ↗
31. L. Singh, I.W. Kim, B.C. Sin, K.D. Mandal, U.S. Rai, A. Ullah, H. Chung, and Y. Lee, RSC Adv. 4, 52770 (2014).10.1039/C4RA08915D ↗
32. J.P. Singh, S. Gautam, P. Kumar, A. Tripathi, J.M. Chen, K.H. Chae, and K. Asokan, J. Alloys Compd. 572, 84 (2013).10.1016/j.jallcom.2013.03.070 ↗
33. K.C. Sekhar, S.H. Key, K.P. Hong, C.S. Han, J.M. Yook, D.S. Kim, J.C. Kim, J.C. Park, and Y.S. Cho, Curr. Appl. Phys. 12, 654 (2012).10.1016/j.cap.2011.09.017 ↗
34. C. Anil Kumar and D. Pamu, Appl. Surf. Sci. 340, 56 (2015).10.1016/j.apsusc.2015.02.172 ↗
35. D. Xu, K. He, R. Yu, L. Jiao, H. Yuan, X. Sun, G. Zhao, H. Xu, and X. Cheng, J. Alloys Compd. 592, 220 (2014).10.1016/j.jallcom.2013.12.264 ↗
36. L.Z. Cao, W.Y. Fu, S.F. Wang, Q. Wang, Z.H. Sun, H. Yang, B.L. Cheng, H. Wang, and Y.L. Zhou, J. Phys. D Appl. Phys. 40, 1460 (2007).10.1088/0022-3727/40/5/022 ↗
37. F. Moura, E.C. Aguiar, E. Longo, J.A. Varela, and A.Z. Simoes, J. Alloys Compd. 509, 3817 (2011).10.1016/j.jallcom.2010.12.184 ↗