journal article·2017-04

The Influence of Processing on Strengthening Mechanisms in Pb-Free Solder Joints

Francis Mutuku, Babak Arfaei, Eric J. Cotts

Journal of Electronic Materials· Volume 46· Issue 4
Publisher page

Abstract

The number, and the spacing, of Ag3Sn precipitates in Sn-Ag-Cu/Cu solder joints were related to separate processing parameters. The mechanical properties of an individual solder joint were directly related to the resulting distribution of different dispersoids in the joint. As the number of Ag3Sn precipitates increased, so did solder joint strength and shear fatigue lifetime. The room-temperature shear fatigue lifetime was inversely correlated with the separation between Ag3Sn precipitates. Bi and Sb solid solution strengthening was found to result in significantly larger values of shear strength and shear fatigue lifetime for one Pb-free solder. Room-temperature shear fatigue lifetime tests were identified as a relatively straightforward, yet sensitive means to gain insight into the reliability of Sn-Ag-Cu (SAC) solder joints.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. T.K. Lee, T.R. Beiler, C.U. Kim, and H. Ma, Fundamentals of Lead-Free Solder Interconnect Technology (Boston: Springer, 2015), pp. 29–80.
2. K.J. Puttlitz and K.A. Stalter, Handbook of Lead-Free Solder Technology for Microelectronic Assemblies (Boca Raton: CRC Press, 2004), pp. 239–263.10.1201/9780203021484 ↗
3. G. Zeng, S. McDonald, and K. Nogita, Microelectron. Reliab. 52, 1306 (2012).10.1016/j.microrel.2012.02.018 ↗
4. Y. Kariya and M. Otsuka, J. Electron. Mater. 27, 866 (1998).10.1007/s11664-998-0111-6 ↗
5. I.E. Anderson, J. Mater. Sci. 18, 55 (2007).
6. M. Sona and K.N. Prabhu, J. Mater. Sci. 24, 3149 (2013).
7. H.R. Kotadia, P.D. Howes, and S.H. Mannan, Microelectron. Reliab. 54, 1253 (2014).10.1016/j.microrel.2014.02.025 ↗
8. P.D. Pereira, J.E. Spinelli, and A. Garcia, Mater. Des. 45, 377 (2013).10.1016/j.matdes.2012.09.016 ↗
9. S.L. Allen, M.R. Notis, R.R. Chromik, and R.P. Vinci, J. Mater. Res. 19, 1417 (2004).10.1557/JMR.2004.0190 ↗
10. R.J. Coyle, K. Sweatman, and B. Arfaei, J. Met. 67, 2394 (2015).
11. B. Arfaei, F.M. Mutuku, K. Sweatman, N.C. Lee, E. Cotts and R. Coyle, IEEE 64th ECTC, 655 (2014)10.1109/ECTC.2014.6897356 ↗
12. D.R. Askeland, P.P. Fulay, and W.J. Wright, Science and Engineering of Materials, 6th ed. (Scarborough: Nelson Education, 2011), pp. 384–470.
13. I. Dutta, P. Kumar, and G. Subbarayan, J. Met. 61, 29 (2009).
14. J. Keller, D. Baither, U. Wilke, and G. Schmitz, Acta Mater. 59, 2731 (2011).10.1016/j.actamat.2011.01.012 ↗
15. R. Parker, R. Coyle, G. Henshall, J. Smetana, and E. Benedetto, SMTA International Conference Proceedings, 348 (2012)
16. P. Kumar, Z. Huang, S.C. Chavali, D.K. Chan, I. Dutta, G. Subbarayan, and V. Gupta, IEEE Trans. Adv. Packag. 2, 256 (2012).
17. S.K. Kang, D.Y. Shih, N.Y. Donald, W. Henderson, T. Gosselin, A. Sarkhel, and W.K. Choi, JOM 55, 61 (2003).10.1007/s11837-003-0143-6 ↗
18. F.M. Mutuku, B. Arfaei, and E.J. Cotts, IEEE 64th ECTC, 1769 (2014)10.1109/ECTC.2014.6897538 ↗
19. L. Snugovsky, P. Snugovsky, D. Perovic, and J. Rutter, Mater. Sci. Technol. 21, 61 (2005).10.1179/174328405X14047 ↗
20. B. Arfaei, N. Kim, and E.J. Cotts, J. Electron. Mater. 41, 362 (2012).10.1007/s11664-011-1756-0 ↗
21. K.S. Kim, S.H. Huh, and K. Suganuma, Mater. Sci. Eng. A 333, 106 (2002).10.1016/S0921-5093(01)01828-7 ↗
22. T. Korhonen, P. Turpeinen, L. Lehman, M.A. Korhonen, and D.W. Henderson, J. Electron. Mater. 33, 1581 (2004).10.1007/s11664-004-0101-2 ↗
23. B. Arfaei and E. Cotts, J. Electron. Mater. 38, 2617 (2009).10.1007/s11664-009-0932-y ↗
24. G. Cuddalorepatta and A. Dasgupta, Acta Mater. 58, 5989 (2010).10.1016/j.actamat.2010.07.016 ↗
25. M. Maleki, J. Cugnoni, and J. Botsis, J. Electron. Mater. 43, 1026 (2014).10.1007/s11664-014-3017-5 ↗
26. S. Wiese and K. Wolter, Microelectron. Reliab. 47, 223 (2007).10.1016/j.microrel.2006.09.006 ↗
27. H. Ma and J.C. Suhling, J. Mater. Sci. 44, 1141 (2009).10.1007/s10853-008-3125-9 ↗
28. P. Chauhan, S. Mukherjee, M. Osterman, A. Dasgupta, and M. Pecht, ASME InterPACK, 1 (2013)
29. C. Burke and J. Punch, IEEE Trans. CPMT 4, 516 (2014).
30. R.J. Coyle, P.P. Solano, A.J. Serafino, and S.A. Gahr, 50th ECTC, 160 (2014)
31. Y. Zhang, Z. Cai, J.C. Suhling, P. Lall, and M. Bozack, SEM Annual Conference, 1 (2009)10.1109/ITHERM.2010.5501301 ↗
32. Q. Xiao, L. Nguyen and W.D. Armstrong, IEEE 54th ECTC, 1326 (2004)
33. B. Arfaei, T. Tashtoush, N. Kim, L. Wentlent, E. Cotts, and P. Borgesen, IEEE 61st ECTC, 125 (2011)10.1109/ECTC.2011.5898502 ↗
34. F. Ochoa, J.J. Williams, and N. Chawla, JOM 55, 56 (2003).10.1007/s11837-003-0142-7 ↗
35. Y. Kariya, T. Hosoi, S. Terashima, M. Tanaka, and M. Otsuka, J. Electron. Mater. 33, 321 (2004).10.1007/s11664-004-0138-2 ↗
36. M. Lu, D.Y. Shih, P. Lauro, C. Goldsmith, and D.W. Henderson, Appl. Phys. A 92, 211909 (2008).
37. M. Kerr and N. Chawla, Acta Mater. 52, 4527 (2004).10.1016/j.actamat.2004.06.010 ↗
38. J.E. Spinelli, B.L. Silva, and A. Garcia, J. Electron. Mater. 43, 1347 (2014).10.1007/s11664-014-3087-4 ↗
39. Y. Takamatsu, H. Esaka, and K. Shinozuka, J. Electron. Mater. 41, 2035 (2012).10.1007/s11664-012-2075-9 ↗
40. S. Seo, S.K. Kang, D. Shih, and H.M. Lee, J. Electron. Mater. 38, 257 (2008).10.1007/s11664-008-0545-x ↗
41. Y. Takamatsu, H. Esaka, and K. Shinozuka, Mater. Trans. 52, 189 (2011).10.2320/matertrans.M2010325 ↗
42. H. Lee and Y. Chen, J. Alloys Compd. 509, 2510 (2011).10.1016/j.jallcom.2010.11.068 ↗
43. L.R. Garcia, W.R. Osorio, and A. Garcia, Mater. Des. 32, 3008 (2011).10.1016/j.matdes.2010.12.046 ↗
44. J. Shen, Y.C. Chan, and S.Y. Liu, Intermetallics 16, 1142 (2008).10.1016/j.intermet.2008.06.016 ↗