journal article·2016-10

Interfacial Characterizations of a Nickel-Phosphorus Layer Electrolessly Deposited on a Silane Compound-Modified Silicon Wafer Under Thermal Annealing

Kuei-Chang Lai, Pei-Yu Wu, Chih-Ming Chen, Tzu-Chien Wei, Chung-Han Wu, Shien-Ping Feng

Journal of Electronic Materials· Volume 45· Issue 10
Publisher page

Abstract

Front-side metallization of a Si wafer was carried out using electroless deposition of nickel-phosphorus (Ni-P) catalyzed by polyvinylpyrrolidone-capped palladium nanoclusters (PVP-nPd). A 3-[2-(2-Aminoethylamino)ethylamino] propyl-trimethoxysilane (ETAS) layer was covalently bonded on the Si surface as bridge linker to the Pd cores of PVP-nPd clusters for improving adhesion between the Ni-P layer and the Si surface. To investigate the effects of an interfacial ETAS layer on the Ni silicide formation at the Ni-P/Si contact, the Ni-P-coated Si samples were thermally annealed via rapid thermal annealing (RTA) from 500°C to 900°C for 2 min. To compare with the ETAS sample, the sputtered Ni layer on Si and electroless Ni-P layer on ion-Pd-catalyzed Si (both are standard processes) were also investigated. The microstructural characterizations for the Ni-P or Ni layer deposited on the Si wafer were performed using x-ray diffractometer, scanning electron microscopy, and transmission electron microscopy. Our results showed that the ETAS layer acted as a barrier to slow the atomic diffusion of Ni toward the Si side. Although the formation of Ni silicides required a higher annealing temperature, the adhesion strength and contact resistivity measurements of annealed Ni-P/Si contacts showed satisfactory results, which were essential to the device performance and reliability during thermal annealing.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and interfaces · Electrodeposition and Electroless Coatings · Molecular Junctions and Nanostructures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. A. Brenner, C. Chase, and G.E. Riddell, U.S. patent US 2,532,283 (1950).
2. J.F. Rohan, G. O’Riordan, and J. Boardman, Appl. Surf. Sci. 185, 289 (2002).10.1016/S0169-4332(01)00982-5 ↗
3. C.P. Lin and C.M. Chen, Microelectron. Reliab. 52, 385 (2012).10.1016/j.microrel.2011.03.007 ↗
4. J.E. Lynch, P.E. Pehrsson, D.N. Leonard, and J.M. Calvert, J. Electrochem. Soc. 144, 1698 (1997).10.1149/1.1837663 ↗
5. C.R. Jr. Shipley, U.S. patent 3,011,920 (1961).
6. S.J. Cherng, C.M. Chen, W.P. Dow, C.H. Lin, and S.W. Chen, Electrochem. Solid State Lett. 14, P13 (2011).10.1149/1.3577681 ↗
7. T.C. Wei, T.C. Pan, C.M. Chen, K.C. Lai, and C.H. Wu, Electrochem. Commun. 54, 6 (2015).10.1016/j.elecom.2015.02.009 ↗
8. W.J. Dressick, L.M. Kondracki, M.S. Chen, S.L. Brandow, E. Matijević, and J.M. Calvert, Colloids Surf. A 108, 101 (1996).10.1016/0927-7757(95)03392-0 ↗
9. D. Zabetakis, W.J. Dressick, and A.C.S. Appl, Mater. Interfaces 1, 4 (2009).10.1021/am800121d ↗
10. T. Osaka, N. Takano, T. Kurokawa, T. Kaneko, and K.J. Ueno, J. Electrochem. Soc. 149, C573 (2002).10.1149/1.1512669 ↗
11. T. Osaka and M. Yoshino, Electrochim. Acta 53, 271 (2007).10.1016/j.electacta.2007.04.004 ↗
12. M.C. Raval and C.S. Solanki, J. Sol. Energy 2013, 1 (2013).10.1155/2013/183812 ↗
13. E.J. Lee, D.S. Kim, and S.H. Lee, Sol. Energy Mater. Sol. Cells 74, 65 (2002).10.1016/S0927-0248(02)00049-1 ↗
14. G.K. Reeves and H.B. Harrison, IEEE Electron Device Lett. 3, 111 (1982).10.1109/EDL.1982.25502 ↗
15. Q.X. Mai, R.D. Daniels, and H.B. Harpalani, Thin Solid Films 166, 235 (1988).10.1016/0040-6090(88)90384-7 ↗
16. N.M. Martyak, Chem. Mater. 6, 1667 (1994).10.1021/cm00046a019 ↗
17. K.H. Hur, J.H. Jeong, and D.N. Lee, J. Mater. Sci. 25, 2573 (1990).10.1007/BF00638061 ↗
18. M.O. Alam, Y.C. Chan, and K.N. Tu, J. Appl. Phys. 94, 4108 (2003).10.1063/1.1602563 ↗
19. K.J. Lee and P. Nash, Phase Diagrams of Binary Nickel Alloys (Park: ASM Materials, 1991).
20. G. Ottaviani, J. Vac. Sci. Technol. 16, 1112 (1979).10.1116/1.570170 ↗
21. F.F. Zhao, J.Z. Zheng, Z.X. Shen, T. Osipowicz, W.Z. Gao, and L.H. Chan, Microelectron. Eng. 71, 104 (2004).10.1016/j.mee.2003.08.010 ↗
22. J. Foggiato, W.S. Yoo, M. Ouaknine, T. Murakami, and T. Fukada, Mater. Sci. Eng. B. 56, 114–115 (2004).
23. S. Abhaya, G. Amarendra, S. Kalavathi, P. Gopalan, M. Kamruddin, A.K. Tyagi, V.S. Sastry, and C.S. Sundar, Appl. Surf. Sci. 253, 3799 (2007).10.1016/j.apsusc.2006.07.091 ↗
24. G. Ottaviani, K. Tu, and J. Mayer, Phys. Rev. B. 24, 3354 (1981).10.1103/PhysRevB.24.3354 ↗
25. L. Tous, D.H. Van Dorp, R. Russell, J. Das, M. Aleman, H. Bender, J. Meersschaut, K. Opsomer, J. Poortmans, and R. Mertens, Energy Procedia (Amsterdam: Elsevier, 2011), pp. 39–46.
26. H. Pfeiffer, F. Tancret, and T. Brousse, Mater. Chem. Phys. 92, 534 (2005).10.1016/j.matchemphys.2005.01.055 ↗
27. V.A. Chaudhari and C.S. Solanki, Solar Energy Mater. Solar Cells 94, 2094 (2010).10.1016/j.solmat.2010.06.032 ↗
28. C. Boulord, A. Kaminski, B. Canut, S. Cardinal, and M. Lemiti, J. Electrochem. Soc. 157, H742 (2010).10.1149/1.3391538 ↗
29. M.V. Sullivan and J.H.J. Eigler, J. Electrochem. Soc. 104, 226 (1957).10.1149/1.2428541 ↗