journal article·2014-09

Effect of Adding Zinc Oxide Particles to the Anode Catalyst Layer on the Performance of a Proton-Exchange Membrane Fuel Cell

Sheng-Yu Fang, Lay Gaik Teoh, Rong-Hsin Huang, Wen-Kai Chao, Tien-Jen Lin, Kai-Chun Yang, Kan-Lin Hsueh, Fuh-Sheng Shieu

Journal of Electronic Materials· Volume 43· Issue 9
Publisher page

Abstract

Commercial and home-made hygroscopic zinc oxide (ZnO) particles were added to the anode catalyst layer of a membrane electrode assembly (MEA) to improve its wettability, and thus the performance of a proton-exchange membrane fuel cell under low-humidity conditions. Scanning electron microscopy revealed that the size of the home-made ZnO particles calcined at 300°C ranged from 20 nm to 30 nm. Single-cell performance with different types of ZnO particle in the anode catalyst layer was investigated at anode humidifier temperatures of 25, 45, and 65°C; the cell and cathode humidifier temperatures were fixed at 65°C. MEA with the ZnO particles calcined at 300°C had maximum power densities of 0.26, 0.33, and 0.34 W/cm2 at anode humidifier temperatures of 25, 45, and 65°C, respectively; these were 30, 37.5, and 36% higher, respectively, than for MEA without ZnO particles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. S.F. Au, K. Hemmes, and N. Woudstra, J. Electrochem. Soc. 149, A879 (2002).10.1149/1.1481717 ↗
2. A. Midilli and I. Dincer, Int. J. Hydrog. Energy 32, 511 (2007).10.1016/j.ijhydene.2006.06.050 ↗
3. O.J. Murphy, G.D. Hitchens, and D.J. Manko, J. Power Sources 47, 353 (1994).10.1016/0378-7753(94)87014-4 ↗
4. S. Takenaka, H. Matsumori, H. Matsune, E. Tanabe, and M. Kishida, J. Electrochem. Soc. 155, B929 (2008).10.1149/1.2952665 ↗
5. R. Beneito, J. Vilaplana, and S. Gisbert, Int. J. Hydrog. Energy 32, 1554 (2007).10.1016/j.ijhydene.2006.10.049 ↗
6. A.L. Dicks, J.C. Diniz da Costa, A. Simpson, and B. McLellan, J. Power Sources 131, 1 (2004).10.1016/j.jpowsour.2003.11.079 ↗
7. D. Candusso, F. Harel, A.D. Bernardinis, X. Francois, M.C. Pera, D. Hissel, P. Schott, G. Coquery, and J.M. Kauffmann, Int. J. Hydrog. Energy 31, 1019 (2006).10.1016/j.ijhydene.2005.11.010 ↗
8. S. Kim and I. Hong, J. Ind. Eng. Chem. 16, 901 (2010).10.1016/j.jiec.2010.05.017 ↗
9. Q. Yan, H. Toghiani, and J. Wu, J. Power Sources 158, 316 (2006).10.1016/j.jpowsour.2005.09.013 ↗
10. T.V. Nguyen and M.W. Knobbe, J. Power Sources 114, 70 (2003).10.1016/S0378-7753(02)00591-8 ↗
11. H. Li, Y. Tang, Z. Wang, Z. Shi, S. Wu, D. Song, J. Zhang, K. Fatih, J. Zhang, H. Wang, Z. Liu, R. Abouatallah, and A. Mazza, J. Power Sources 178, 103 (2008).10.1016/j.jpowsour.2007.12.068 ↗
12. N. Yousfi-Steiner, Ph Moçotéguy, D. Candusso, D. Hissel, A. Hernandez, and A. Aslanides, J. Power Sources 183, 260 (2008).10.1016/j.jpowsour.2008.04.037 ↗
13. V. Baglio, A.S. Aricò, A. Stassi, C. D’Urso, A.D. Blasi, A.M. Castro Luna, and V. Antonucci, J. Power Sources 159, 900 (2006).10.1016/j.jpowsour.2005.12.088 ↗
14. E.I. Santiago, L.C. Varanda, and H.M. Villullas, J. Phys. Chem. C 111, 3146 (2007).10.1021/jp0670081 ↗
15. J.R.C. Salgado, E. Antolini, and E.R. Gonzalez, J. Phys. Chem. B 108, 17767 (2004).10.1021/jp0486649 ↗
16. V. Stamenković, T.J. Schmidt, P.N. Ross, and N.M. Marković, J. Phys. Chem. B 106, 11970 (2002).10.1021/jp021182h ↗
17. H. Yang, N. Alonso-Vante, J.M. Léger, and C. Lamy, J. Phys. Chem. B 108, 1938 (2004).10.1021/jp030948q ↗
18. T. Ioroi and K. Yasuda, J. Electrochem. Soc. 152, A1917 (2005).10.1149/1.2006547 ↗
19. R. Lin, H. Zhang, T. Zhao, C. Cao, D. Yang, and J. Ma, Electrochim. Acta 62, 263 (2012).10.1016/j.electacta.2011.12.018 ↗
20. Z.M. Zhou, Z.G. Shao, X.P. Qin, X.G. Chen, Z.D. Wei, and B.L. Yi, Int. J. Hydrog. Energy 35, 1719 (2010).10.1016/j.ijhydene.2009.12.056 ↗
21. H.R. Colón-Mercado, H. Kim, and B.N. Popov, Electrochem. Commun. 6, 795 (2004).10.1016/j.elecom.2004.05.028 ↗
22. H.R. Colón-Mercado, H. Kim, and B.N. Popov, J. Power Sources 155, 253 (2006).10.1016/j.jpowsour.2005.05.011 ↗
23. H.N. Yang, S.H. Cho, and W.J. Kim, J. Membr. Sci. 421–422, 318 (2012).10.1016/j.memsci.2012.07.033 ↗
24. J.H. Seol, J.H. Won, K.S. Yoon, Y.T. Hong, and S.Y. Lee, Int. J. Hydrog. Energy 37, 6189 (2012).10.1016/j.ijhydene.2011.06.085 ↗
25. M. Amjadi, S. Rowshanzamir, S.J. Peighambardoust, M.G. Hosseini, and M.H. Eikani, Int. J. Hydrog. Energy 35, 9252 (2010).10.1016/j.ijhydene.2010.01.005 ↗
26. Z. Wang, H.L. Tang, H.J. Zhang, M. Lei, R. Chen, P. Xiao, and M. Pan, J. Membr. Sci. 421–422, 201 (2012).10.1016/j.memsci.2012.07.014 ↗
27. J. Shen, J. Xi, W. Zhu, L. Chen, and X. Qiu, J. Power Sources 159, 894 (2006).10.1016/j.jpowsour.2005.11.070 ↗
28. S. Wen, C. Gong, W.C. Tsen, Y.C. Shu, and F.C. Tsai, Int. J. Hydrog. Energy 34, 8982 (2009).10.1016/j.ijhydene.2009.08.074 ↗
29. S. Ren, G. Sun, C. Li, S. Song, Q. Xin, and X. Yang, J. Power Sources 157, 724 (2006).10.1016/j.jpowsour.2006.01.001 ↗
30. J. Yang, Y. Li, Y. Huang, J. Liang, and P.K. Shen, J. Power Sources 177, 56 (2008).10.1016/j.jpowsour.2007.11.022 ↗
31. J. Chabé, M. Bardet, and G. Gébel, Solid State Ion. 229, 20 (2012).10.1016/j.ssi.2012.10.006 ↗
32. M. Choun, S. Chung, H. Jeon, S. Uhm, and J. Lee, Electrochem. Commun. 24, 108 (2012).10.1016/j.elecom.2012.08.022 ↗
33. T. Kitahara, H. Nakajima, and K. Mori, J. Power Sources 199, 29 (2012).10.1016/j.jpowsour.2011.10.002 ↗
34. W.K. Chao, R.H. Huang, C.J. Huang, K.L. Hsueh, and F.S. Shieu, J. Electrochem. Soc. 157, B1012 (2010).10.1149/1.3428725 ↗
35. W.K. Chao, L.C. Chang, R.H. Huang, K.L. Hsueh, and F.S. Shieu, J. Electrochem. Soc. 157, A1262 (2010).10.1149/1.3489367 ↗
36. W.K. Chao, C.M. Lee, D.C. Tsai, C.C. Chou, K.L. Hsueh, and F.S. Shieu, J. Power Sources 185, 136 (2008).10.1016/j.jpowsour.2008.06.052 ↗
37. U.H. Jung, K.T. Park, E.H. Park, and S.H. Kim, J. Power Sources 159, 529 (2006).10.1016/j.jpowsour.2005.11.050 ↗
38. M. Ristić, S. Musić, M. Ivanda, and S. Popović, J. Alloy Compd. 397, L1 (2005).10.1016/j.jallcom.2005.01.045 ↗
39. T. Ates, C. Tatar, and F. Yakuphanoglu, Sens. Actuator A 190, 153 (2013).10.1016/j.sna.2012.11.031 ↗
40. A.K. Zak, W.H.A. Majid, M.R. Mahmoudian, M. Darroudi, and R. Yousefi, Adv. Powder Technol. 24, 618 (2013).10.1016/j.apt.2012.11.008 ↗
41. X. Deng, J. Sun, S. Yu, J. Xi, W. Zhu, and X. Qiu, Int. J. Hydrog. Energy 33, 1008 (2008).
42. Y.K. Lee, K.S. Kim, J.G. Ahn, I.H. Son, and W.C. Shin, Int. J. Hydrog. Energy 35, 1147 (2010).10.1016/j.ijhydene.2009.11.035 ↗
43. G.S. Wu, T. Xie, X.Y. Yuan, Y. Li, L. Yang, Y.H. Xiao, and L.D. Zhang, Solid State Commun. 134, 485 (2005).10.1016/j.ssc.2005.02.015 ↗
44. K. Ada, M. Gökgöz, M. önal, and Y. Sarıkaya, Powder Technol. 181, 285 (2008).10.1016/j.powtec.2007.05.015 ↗
45. T.T. Chau, W.J. Bruckard, P.T.L. Koh, and A.V. Nguyen, Adv. Colloid Interface Sci. 150, 106 (2009).10.1016/j.cis.2009.07.003 ↗
46. N. Steinera, P. Mocoteguy, D. Candusso, D. Hissel, A. Hernandez, and A. Aslanides, J. Power Sources 183, 260 (2008).10.1016/j.jpowsour.2008.04.037 ↗
47. H.C. Tu, Y.Y. Wang, C.C. Wan, and K.L. Hsueh, J. Power Sources 159, 1105 (2006).10.1016/j.jpowsour.2005.12.052 ↗