Parameter Optimization and Operating Strategy of a TEG System for Railway Vehicles
Source abstract
Abstract
A thermoelectric generator (TEG) system demonstrator for diesel electric locomotives with the objective of reducing the mechanical load on the thermoelectric modules (TEM) is developed and constructed to validate a one-dimensional thermo-fluid flow simulation model. The model is in good agreement with the measurements and basis for the optimization of the TEG’s geometry by a genetic multi objective algorithm. The best solution has a maximum power output of approx. 2.7 kW and does not exceed the maximum back pressure of the diesel engine nor the maximum TEM hot side temperature. To maximize the reduction of the fuel consumption, an operating strategy regarding the system power output for the TEG system is developed. Finally, the potential consumption reduction in passenger and freight traffic operating modes is estimated under realistic driving conditions by means of a power train and lateral dynamics model. The fuel savings are between 0.5% and 0.7%, depending on the driving style.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Engineering and Vibrations Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. F. Kreith and D.Y. Goswani, Handbook of Energy Efficiency and Renewable Energy (Boca Raton: Taylor and Francis, 2007), p. 5.10.1201/9781420003482 ↗
2. R. Schimke, G. Zimmermann, and M. Beitelschmidt, Energy Efficient Vehicles Technology, ed. B. Bäker and L. Morawietz (Expert, Renningen, 2011), p. 57.
3. European Commission Directive 2012/46/EU, Off. J. L 353/80 (2012).
4. A. Heghmanns, M. Beitelschmidt, S. Wilbrecht, K. Geradts, and G. Span, Mater. Today: Proc. 2, 774 (2015).
5. X. Gou, H. Xiao, and S. Yang, Appl. Energ. 87, 3131 (2010).10.1016/j.apenergy.2010.02.013 ↗
6. W.-H. Chen, C.-C. Wang, C.-I. Hung, C.-C. Yang, and R.-C. Juang, Energy 64, 287 (2014).10.1016/j.energy.2013.10.073 ↗
7. F. Meng, L. Chen, and F. Sun, Int. J. Low-Carbon Technol. 5, 193 (2010).10.1093/ijlct/ctq022 ↗
8. X. Gao, S.J. Andreasen, S.K. Kœr, and L.A. Rosendahl, Int. J. Hydrog. Energ. 39, 6637 (2014).10.1016/j.ijhydene.2014.01.193 ↗
9. B.V.K. Reddy, M. Barry, J. Li, and M.K. Chyu, Energ. Conversat. Manage. 77, 458 (2014).10.1016/j.enconman.2013.09.040 ↗
10. P. Aranguren, D. Astrain, and M.G. Pérez, Energy 74, 346 (2014).10.1016/j.energy.2014.06.094 ↗
11. D.T. Crane and G.S. Jackson, Energ. Conversat. Manage. 45, 1565 (2004).10.1016/j.enconman.2003.09.003 ↗
12. E.F. Thacher, B.T. Helenbrook, M.A. Karri, and C.J. Richter, J. Automob. Eng. 221, 95 (2007).10.1243/09544070JAUTO51 ↗
13. M.A. Karri, E.F. Thacher, and B.T. Helenbrook, Energ. Conversat. Manage. 52, 1596 (2011).10.1016/j.enconman.2010.10.013 ↗
14. M. Follmer, B. Steiner, and D. Knospe, Proceedings of the 11th European Conference on Thermoelectrics: ECT 2013, ed. A. Amaldi, F. Tang (Cham: Springer, 2014), pp. 137–142.
15. C. Häfele and H. Friedrich, Thermoelectric Goes Automotive II, ed. D. Jänsch (Expert, Renningen, 2013), pp. 151–164.
16. H. Zellbeck and S. Risse, Thermoelectric Goes Automotive II, ed. D. Jänsch (Expert, Renningen, 2013), pp. 165–176.
17. G. Span, A. Siegloch, J. Haferkamp, and N. Iosad, Patent No. WO 2013/124094 A3 (2013).
18. The MathWorks Inc., Matlab Documentation R2014b (2014).
19. C.A.C. Caello, A Survey of Constraint Handling Technics Used with Evolutionary Algorithms (Xalapa-Enríquez: Laboratorio Nacional de Informática Avanzada, 1999), p. 3.
20. R.E. Bellmann, Dynamic Programming (Princeton: Princeton University Press, 1957).
21. R. Franke, M. Meyer, and P. Terwiesch, Automatisierungstechnik 50, 606 (2002).10.1524/auto.2002.50.12.606 ↗