Polystyrene-Core Silica-Shell Composite Abrasives: The Influence of Core Size on Oxide Chemical Mechanical Planarization
Source abstract
Abstract
Polystyrene (PS)-core silica-shell composite particles with various core sizes were synthesized and applied in chemical mechanical planarization (CMP). The structures of the obtained PS/SiO2 core/shell particles (CSPs) were characterized by field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and dynamic light scattering (DLS). The effects of the PS core size on oxide CMP behaviors were investigated by atomic force microscopy (AFM) based on the surface profilogram, roughness, and material removal rate (MRR). The roughness of the substrate surface slightly increased with increasing core size, while the MRR obviously increased. The lowest root-mean-square roughness value (0.198 nm) was obtained for the PS/SiO2 CSPs with the smallest cores (216 nm), while the highest MRR (148.9 nm/min) was observed for the CSPs with the largest cores (552 nm). In addition, these polishing results were rationalized according to the indentation-based mechanism, incorporating the total number of active abrasives and the particle indentation depth into the wafer surface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Force Microscopy Techniques and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. M. Krishnan, J.W. Nalaskowski, and L.M. Cook, Chem. Rev. 110, 178 (2010).10.1021/cr900170z ↗
2. X. Feng, D.C. Sayle, Z.L. Wang, M.S. Paras, B. Santora, A.C. Sutorik, T.X.T. Sayle, Y. Yang, Y. Ding, X. Wang, and Y. Her, Science 312, 1504 (2006).10.1126/science.1125767 ↗
3. M. Fu, L. Wei, Y. Li, X. Zhou, S. Hao, and Y. Li, Solid State Sci. 11, 2133 (2009).10.1016/j.solidstatesciences.2009.08.014 ↗
4. H. Lei, X. Wu, and R. Chen, Thin Solid Films 520, 2868 (2012).10.1016/j.tsf.2011.11.057 ↗
5. H. Lei, L. Jiang, and R. Chen, Powder Technol. 219, 99 (2012).10.1016/j.powtec.2011.12.022 ↗
6. H. Li, H. Lei, and R. Chen, Thin Solid Films 520, 6174 (2012).10.1016/j.tsf.2012.05.088 ↗
7. S. Chen, H. Lei, and R. Chen, J. Vac. Sci. Technol. B 31, 021804 (2013).10.1116/1.4792373 ↗
8. S. Armini, C.M. Whelan, K. Maex, J.L. Hernandez, and M. Moinpour, J. Electrochem. Soc. 154, H667 (2007).10.1149/1.2740038 ↗
9. S. Armini, J. De Messemaeker, C.M. Whelan, M. Moinpour, and K. Maex, J. Electrochem. Soc. 155, H653 (2008).10.1149/1.2949085 ↗
10. Y. Chen, J. Lu, and Z. Chen, Appl. Surf. Sci. 257, 8679 (2011).10.1016/j.apsusc.2011.05.047 ↗
11. Y. Chen, J. Lu, and Z. Chen, Microelectron. Eng. 88, 200 (2011).10.1016/j.mee.2010.10.019 ↗
12. A. Chen, W. Mu, and Y. Chen, Appl. Surf. Sci. 290, 433 (2014).10.1016/j.apsusc.2013.11.100 ↗
13. H. Qin, M. Kim, S. Jang, Y. Xu, and T. Kim, ECS Trans. 52, 551 (2013).10.1149/05201.0551ecst ↗
14. W. Li and D. Zhao, Adv. Mater. 25, 142 (2013).10.1002/adma.201203547 ↗
15. Z. Lu, S. Lee, S.V. Babu, and E. Matijević, J. Colloid Interface Sci. 261, 55 (2003).10.1016/S0021-9797(02)00166-2 ↗
16. P.H. Chen, B.W. Huang, and H. Shih, Thin Solid Films 476, 130 (2005).10.1016/j.tsf.2004.09.049 ↗
17. Y. Wang, Y. Zhao, W. An, Z. Ni, and J. Wang, Appl. Surf. Sci. 257, 249 (2010).10.1016/j.apsusc.2010.06.077 ↗
18. M. Oh, J. Nho, S. Cho, J. Lee, and R.K. Singh, Powder Technol. 206, 239 (2011).10.1016/j.powtec.2010.09.025 ↗
19. T. Suratwala, M. Feit, W. Steele, L. Wong, N. Shen, R. Dylla-Spears, R. Desjardin, D. Mason, P. Geraghty, and P. Miller, J. Am. Ceram. Soc. 97, 81 (2014)10.1111/jace.12631 ↗
20. X.L. Jin and L.C. Zhang, Wear 274–275, 203 (2012).10.1016/j.wear.2011.08.028 ↗
21. W. Stöber, A. Fink, and E. Bohn, J. Colloid Interface Sci. 26, 62 (1968).10.1016/0021-9797(68)90272-5 ↗
22. C. Graf, D.L.J. Vossen, A. Imhof, and A. van Blaaderen, Langmuir 19, 6693 (2003).10.1021/la0347859 ↗
23. S. Armini, C.M. Whelan, and K. Maexs, Electrochem. Solid-State Lett. 11, H280 (2008).10.1149/1.2953227 ↗
24. Y.G. Wang and Y.W. Zhao, Chin. Sci. Bull. 53, 2084 (2008).10.1007/s11434-008-0268-7 ↗
25. Y.G. Wang, Y.W. Zhao, J.Z. Jiang, X.F. Li, and J. Bai, Wear 265, 721 (2008).10.1016/j.wear.2008.01.001 ↗
26. S. Oh and J. Seok, Wear 266, 839 (2009).10.1016/j.wear.2008.12.014 ↗
27. L.N. Si, D. Guo, and J.B. Luo, J. Appl. Phys. 107, 064310 (2010).10.1063/1.3327448 ↗
28. S. Armini, I.U. Vakarelski, C.M. Whelan, K. Maex, and K. Higashitani, Langmuir 23, 2007 (2007).10.1021/la062271e ↗
29. Y. Chen, Z.N. Li, and N.M. Miao, Appl. Surf. Sci. 314, 180 (2014).10.1016/j.apsusc.2014.06.166 ↗