Low-Temperature III–V Direct Wafer Bonding Surface Preparation Using a UV-Sulfur Process
Source abstract
Abstract
A technique for direct wafer bonding of III–V materials utilizing a dry sulfur passivation method is presented. Large-area bonding occurs for GaAs/GaAs and InP/InP at room temperature. Bulk fracture strength is achieved after annealing GaAs/GaAs at 400°C and InP/InP at 300°C for times less than 12 h without large compressive forces. X-ray photoelectron spectroscopy measurements of the treated, bonded, and subsequently delaminated surfaces of GaAs/GaAs confirm that sulfide is present at the interface and that the oxide components show a reduced concentration when compared with samples treated with only an oxide etch solution.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Semiconductor materials and interfaces · 3D IC and TSV technologies · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. J.B. Lasky, Appl. Phys. Lett. 48, 78 (1986).10.1063/1.96768 ↗
2. S. Hayashi, M. Goorsky, A. Noori, and D. Bruno, J. Electrochem. Soc. 153, G1011 (2006).10.1149/1.2353607 ↗
3. M.B. Joshi, S.L. Hayashi, and M.S. Goorsky, Electrochem. Solid-State Lett. 11, H236 (2008).10.1149/1.2940345 ↗
4. W.E. Spicer, I. Lindau, P. Pianetta, P.W. Chye, and C.M. Garner, Thin Solid Films 56, 1 (1979).10.1016/0040-6090(79)90048-8 ↗
5. F. Shi, K.-L. Chang, J. Epple, C.-F. Xu, K.Y. Chen, and K.C. Hsieh, J. Appl. Phys. 92, 7544 (2002).10.1063/1.1522484 ↗
6. C. Lian, H.G. Xing, C.S. Wang, D. Brown, and L. McCarthy, Appl. Phys. Lett. 91, 063502 (2007).10.1063/1.2766961 ↗
7. M.L. Huang, Y.C. Chang, C.H. Chang, Y.J. Lee, P. Chang, J. Kwo, T.B. Wu, and M. Hong, Appl. Phys. Lett. 87, 252104 (2005).10.1063/1.2146060 ↗
8. M. Zhu, C.-H. Tung, and Y.-C. Yeo, Appl. Phys. Lett. 89, 202903 (2006).10.1063/1.2388246 ↗
9. M.S. Carpenter, M.R. Melloch, B. Cowans, Z. Dardas, and W.N. Delgass, J. Vac. Sci. Technol. B 7, 845 (1989).10.1116/1.584612 ↗
10. C.J. Sandroff, R.N. Nottenburg, J.C. Bischoff, and R. Bhat, Appl. Phys. Lett. 51, 33 (1987).10.1063/1.98877 ↗
11. H. Huang, X. Ren, X. Wang, Q. Wang, and Y. Huang, Appl. Phys. Lett. 88, 061104 (2006).10.1063/1.2172024 ↗
12. K.D. Choquette, K.M. Geib, H.Q. Hou, A.A. Allerman, S. Kravitz, D.M. Follstaedt, and J.J. Hindi, Wafer Fusion for Integration of Semiconductor Materials and Devices, Report No. SAND99-0923 (1999).10.2172/8371 ↗
13. K. Nakayama, K. Tanabe, and H.A. Atwater, J. Appl. Phys. 103, 094503 (2008).10.1063/1.2912717 ↗
14. C.I.H. Ashby, K. Zavadil, A. Howard, and B.E. Hammons, Appl. Phys. Lett. 64, 23882390 (1994).
15. R.S. Bradley, Proc. R. Soc. Lond. A Math. Phys. Sci. 205, 553 (1951).
16. K.R. Zavadil, C.I.H. Ashby, A.J. Howard, and B.E. Hammons, Ultraviolet Photosulfidation of III–V Compound Semiconductors for Electronic Passivation (Orlando, FL, USA: AVS, 1994), p. 1045.10.1116/1.579282 ↗
17. A. Plossl and G. Krauter, Mater. Sci. Eng. R Rep. 25, 1 (1999).10.1016/S0927-796X(98)00017-5 ↗
18. S. Arabasz, E. Bergignat, G. Hollinger, and J. Szuber, Appl. Surf. Sci. 252, 7659 (2006).10.1016/j.apsusc.2006.03.061 ↗
19. S. Adachi, J. Appl. Phys. 58, R1 (1985).10.1063/1.336070 ↗
20. N. Liu and T. Kuech, J. Electron. Mater. 34, 1010 (2005).10.1007/s11664-005-0088-3 ↗
21. T. Akatsu, A. Plossl, R. Scholz, H. Stenzel, and U. Gosele, J. Appl. Phys. 90, 3856 (2001).10.1063/1.1403684 ↗
22. F. Shi, S. MacLaren, C. Xu, K.Y. Cheng, and K.C. Hsieh, J. Appl. Phys. 93, 5750 (2003).10.1063/1.1563825 ↗
23. J.F. Moulder, W.F. Stickle, P.E. Sobol, and K. Bomben, Handbook of X-Ray Photoelectron Spectroscopy, 2nd ed. (Perkin-Elmer Corporation (Physical Electronics), 1992).
24. H. Ouyang, H.-H. Chiou, Y.S. Wu, J. Cheng, and W. Ouyang, J. Appl. Phys. 102, 013710 (2007).10.1063/1.2748335 ↗