journal article·2016-01

Effect of Solder Joint Length on Fracture Under Bending

Saeed Akbari, Amir Nourani, Jan K. Spelt

Journal of Electronic Materials· Volume 45· Issue 1
Publisher page

Abstract

Fracture tests were conducted on copper–solder–copper joints of various lengths using double-cantilever-beam (DCB) specimens under mode I loading conditions. The thickness and length of the solder joints were large enough to neglect any anisotropy associated with the solder microstructure. It was found that the critical strain energy release rate at crack initiation, G ci, was insensitive to the length of the solder joint; however, for joints shorter than a characteristic length which was a function of the thickness and the mechanical properties of the solder layer and the substrates, the fracture load increased with increasing solder joint length. A sandwich model was developed for the analysis of the stress and strain in solder joints, taking into account the influence of both the bending deformation and the shear deformation of the substrates on the solder joint stresses. Consistent with the experimental results, it was found that solder joints longer than the characteristic length have a maximum peel stress that remains unchanged with joint length, causing the joint strength to become independent of the joint length. A closed-form analytical solution was developed for the characteristic length of DCB specimens under mode I loading. The experimental results were in good agreement with the analytical model and with finite element results. The generality of the G ci failure criterion was demonstrated by comparing the experimental results and the fracture load predictions of mode I DCB solder joints with different lengths.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Electronic Packaging and Soldering Technologies · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. T. An and F. Qin, Microelectron. Reliab. 54, 932 (2014).10.1016/j.microrel.2014.01.008 ↗
2. J. Shen, D. Zhai, Z. Cao, M. Zhao, and Y. Pu, J. Electron. Mater. 43, 2 (2014).10.1007/s11664-013-2845-z ↗
3. F. Dugala and M. Ciappab, Microelectron. Reliab. 54, 1856 (2014).10.1016/j.microrel.2014.08.001 ↗
4. C. Han, C. Oh, N. Park, and W. Hong, Microelectron. Reliab. 50, 1645 (2010).10.1016/j.microrel.2010.07.110 ↗
5. S.P.V. Nadimpalli and J.K. Spelt, Eng. Fract. Mech. 78, 1169 (2011).10.1016/j.engfracmech.2011.01.026 ↗
6. J.P. Ranieri, F.S. Lauten, and D.H. Avery, J. Electron. Mater. 24, 1419 (1995).10.1007/BF02655458 ↗
7. L.M. Yin, X.P. Zhang, and C. Lu, J. Electron. Mater. 38, 2179 (2009).10.1007/s11664-009-0858-4 ↗
8. P. Zimprich, U. Saeed, B. Weiss, and H. Ipser, J. Electron. Mater. 38, 392 (2009).10.1007/s11664-008-0604-3 ↗
9. J. Cugnoni, J. Botsis, V. Sivasubramaniam, and J. Janczak-Rusch, Fatigue Fract. Eng. M 30, 387 (2007).10.1111/j.1460-2695.2006.01077.x ↗
10. M. Goland and E. Reissner, J. Appl. Mech. 11, A17 (1944).10.1115/1.4009336 ↗
11. O. Volkeraen, Constr. Metall. 4, 3 (1965).
12. D.A. Bigwood and A.D. Crocombe, Int. J. Adhes. Adhes. 9, 229 (1989).10.1016/0143-7496(89)90066-3 ↗
13. F.E. Penado, J. Comp. Mater. 27, 383 (1993).10.1177/002199839302700403 ↗
14. B. Zhao, Z.H. Lu, and Y.N. Lu, Int. J. Adhes. Adhes. 31, 434 (2011).10.1016/j.ijadhadh.2011.03.002 ↗
15. S.P.V. Nadimpalli and J.K. Spelt, Mater. Sci. Eng. A. 527, 724 (2010).10.1016/j.msea.2009.08.046 ↗
16. F. Gruttmann and W. Wagner, Comput. Mech. 27, 199 (2001).10.1007/s004660100239 ↗
17. L.F.M. da Silva, P.J.C. das Neves, R. Adams, and J. Spelt, Int. J. Adhes. Adhes. 29, 319 (2009).10.1016/j.ijadhadh.2008.06.005 ↗
18. P. Lall, S. Shantaram, and D. Locker, SMTA J. 27, 13 (2014).
19. S.P.V. Nadimpalli and J.K. Spelt, Eng. Fract. Mech. 78, 317 (2011).10.1016/j.engfracmech.2010.09.011 ↗
20. J.R. Rice, J. Appl. Math. 35, 379 (1968).
21. M.L. Williams, J. Appl. Mech. 19, 526 (1952).10.1115/1.4010553 ↗
22. J. Wang and C. Zhang, Int. J. Adhes. Adhes. 29, 495 (2009).10.1016/j.ijadhadh.2008.10.002 ↗
23. M. Wang, J.N. Reddy, and K.H. Lee, Shear Deformable Beams and Plates, Chapter 2 (New York: Elsevier Science Ltd., 2000), pp. 11–38.10.1016/B978-008043784-2/50002-2 ↗
24. J.N. Reddy, C.M. Wang, and K.H. Lee, Int. J. Solids Struct. 34, 3373 (1997).10.1016/S0020-7683(96)00211-9 ↗
25. P.F. Fuchs, G. Pinter, and M. Tonjec, Microelectron. Reliab. 52, 2730 (2013).
26. ISO, Standard test method for the mode I interlaminar fracture toughness, GIC, of unidirectional fibre-reinforced polymer matrix composites. ISO15024, 2001.
27. B.R.K. Blackman, A.J. Kinloch, M. Parasachi, and W.S. Teo, Int. J. Adhes. Adhes. 23, 293 (2003).10.1016/S0143-7496(03)00047-2 ↗
28. A. Nourani and J.K. Spelt, Effect of Solder Alloy, Aging and Tal on High Strain-Rate Fracture of Lead-Free Solder Joints, SMTA Int. Conf. Proc. (2015).
29. A. Nourani and J.K. Spelt, Eng. Fract. Mech. 142, 64 (2015).10.1016/j.engfracmech.2015.05.042 ↗
30. A. Nourani and J.K. Spelt, Mater. Des. 85, 115 (2015).10.1016/j.matdes.2015.06.134 ↗
31. Y.S. Lai, H.C. Chang, and C.L. Yeh, Microelectron. Reliab. 47, 2179 (2007).10.1016/j.microrel.2006.11.015 ↗
32. Y. Qi, H.R. Ghorbani, J.K. Spelt, and I.E.E.E. Trans, Adv. Packag. 43, 690 (2006).10.1109/TADVP.2006.884805 ↗