Effect of Cyclic Thermal Loading on the Microstructure and Thermoelectric Properties of CoSb3
Source abstract
Abstract
The effect of cyclic thermal loading on the microstructure and thermoelectric properties of CoSb 3 was investigated. The microstructures of the samples were characterized by x-ray diffractometry, scanning electron microscopy, energy dispersive x-ray spectrometry and density measurements. The electrical conductivity, the Seebeck coefficient and the thermal conductivity were measured from room temperature to 800 K. Under cyclic thermal loading, antimony partially volatilized from the surface of the sample, and the density obviously decreased. After 2000 cycles, the phase composition of the sample remained stable, and the average grain size did not change significantly. Moreover, the electrical conductivity varied only slightly, except in the low temperature region. The Seebeck coefficient decreased slightly. However, the thermal conductivity changed remarkably with increasing numbers of thermal cycles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Advanced Semiconductor Detectors and Materials · Optical properties and cooling technologies in crystalline materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. B.C. Sales, D. Mandrus, and R.K. Williams, Science 272, 1325 (1996). doi: 10.1126/science.272.5266.132510.1126/science.272.5266.1325 ↗
2. G.S. Nolas, M. Kaeser, R.T. Littleton IV, and T.M. Tritt, Appl. Phys. Lett. 77, 1855 (2000). doi: 10.1063/1.131159710.1063/1.1311597 ↗
3. L.D. Chen, T. Kawahara, X.F. Tang, T. Goto, T. Hirai, J.S. Dyck, W. Chen, and C. Uher, J. Appl. Phys. 90,1864 (2001). doi: 10.1063/1.138816210.1063/1.1388162 ↗
4. X. Tang, H. Li, and Q. Zhang, M. Niino, and T. Goto, J. Appl. Phys. 100, 123702 (2006).doi: 10.1063/1.237501710.1063/1.2375017 ↗
5. X. Shi, H. Kong, C.-P. Li, C. Uher, J. Yang, J.R. Salvador, H. Wang, L. Chen, and W. Zhang, Appl. Phys. Lett. 92, 182101 (2008).doi: 10.1063/1.292021010.1063/1.2920210 ↗
6. Q. Zhang, X. Tang, P. Zhai, M. Niino, and C. Endo, Mater. Sci. Forum, 492–493,135 (2005). doi: 10.4028/www.scientific.net/MSF.492-493.13510.4028/www.scientific.net/MSF.492-493.135 ↗
7. M.S. El-Genk and H.H. Saber, Proceedings of Space Technology and Applications International Forum (American Institute of Physics, Melville, NY, 2004), p. 529.
8. P. Yodovard, J. Khedari, and J. Hirunlabh, Energy Source 23, 213 (2001). doi: 10.1080/0090831015113388910.1080/00908310151133889 ↗
9. R. Hara, S. Inoue, H.T. Kaibe, and S. Sano, J. Alloys Compd. 349, 297 (2003). doi: 10.1016/S0925-8388(02)00902-710.1016/S0925-8388(02)00902-7 ↗
10. M.S. El-Genk, H.H. Saber, T. Caillat, and J. Sakamoto, Energy Convers. Manag. 47, 174, (2006). doi: 10.1016/j.enconman.2005.03.02310.1016/j.enconman.2005.03.023 ↗
11. X.F. Tang, L.D. Chen, T. Goto, T. Hirai, and R.Z. Yuan, Sci. China Ser. B Chem. 43, 306 (2000). doi: 10.1007/BF0296952610.1007/BF02969526 ↗
12. W.-S. Liu, B.-P. Zhang, J.-F. Li, and L.-D. Zhao, J. Phys. D Appl. Phys. 40, 6784 (2007). doi: 10.1088/0022-3727/40/21/04410.1088/0022-3727/40/21/044 ↗
13. H. Li, X. Tang, X. Su, and Q. Zhang, Appl. Phys. Lett. 92, 202114 (2008). doi: 10.1063/1.293627710.1063/1.2936277 ↗
14. G.S. Nolas, M. Kaeser, R.T. Littleton IV, and T.M. Tritt, Appl. Phys. Lett. 77, 1855 (2000). doi: 10.1063/1.131159710.1063/1.1311597 ↗
15. L. Yang, L. Zhang, and J. Wu, Acta. Phys. Sin. 53, 537 (2004).10.7498/aps.53.537 ↗