Effect of Thermal Aging on the Mechanical Properties of Sn3.0Ag0.5Cu/Cu Solder Joints Under High Strain Rate Conditions
Source abstract
Abstract
Shear tests with velocities between 0.5 m/s and 2.5 m/s were conducted to investigate the deformation characteristics of 0.76 mm lead-free Sn-3Ag-0.5Cu solder ball joints after thermal aging at 373 K up to 1000 h. A scanning electron microscope equipped with energy dispersive spectroscopy was then used to examine the fracture surfaces and microstructures of the solder joints. The results showed that the main failure mode of the solder joints was the brittle interfacial fracture mode with cleavage failure in the intermetallic compound (IMC). The maximum shear strength and the fracture toughness (K C) of the solder joint decreased substantially after aging for the initial aging time, after which they decreased gradually with further aging or an increase in the strain rate. The evolution of the IMC layer when it was thicker and had coarser nodules due to thermal aging was the primary cause of the reduction in the shear strength and fracture toughness in this study.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Intermetallics and Advanced Alloy Properties · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. P. Liu, P. Yao, and J. Liu, J. Alloy. Compd. 486, 474 (2009).10.1016/j.jallcom.2009.06.171 ↗
2. D.H. Li, C.Q. Liu, and P.P. Conway, Mater. Sci. Eng. A 391, 95 (2005).10.1016/j.msea.2004.10.007 ↗
3. Y.S. Lai, P.F. Yang, and C.L. Yeh, Microelectron. Reliab. 46, 645 (2006).10.1016/j.microrel.2005.07.005 ↗
4. T.H. You, Y.S. Kim, J.N. Kim, J.H. Lee, B.W. Jung, J.T. Moon, and H.M. Choe, J. Electron. Mater. 38, 410 (2009).10.1007/s11664-008-0633-y ↗
5. E.H. Wong, S.K.W. Seah, and V.P.W. Shim, Microelectron. Reliab. 48, 1747 (2008).10.1016/j.microrel.2008.08.006 ↗
6. I.D. You and H.K. Kim, Mater. Sci. Eng. A 556, 551 (2012).10.1016/j.msea.2012.07.025 ↗
7. H. Tsukamoto, T. Nishimura, S. Suenaga, and K. Nogita, Mater. Sci. Eng. B 171, 162 (2010).10.1016/j.mseb.2010.03.092 ↗
8. X. Hu, Y. Li, Y. Liu, Y. Liu, and Z. Min, Microelectron. Reliab. 54, 1575 (2014).10.1016/j.microrel.2014.04.003 ↗
9. J.W. Yoon and S.B. Jung, J. Alloy. Compd. 407, 141 (2006).10.1016/j.jallcom.2005.06.047 ↗
10. V.L. Nguyen and H.K. Kim, J. Electron. Mater. 43, 4171 (2014).10.1007/s11664-014-3394-9 ↗
11. S.M. Joo and H.K. Kim, Mater. Sci. Eng. A 528, 2711 (2011).10.1016/j.msea.2010.12.003 ↗
12. D.R. Flanders, E.G. Jacobs, and R.F. Pinizzotto, J. Electron. Mater. 26, 883 (1997).10.1007/s11664-997-0268-4 ↗
13. K.E. Yazzie, H.X. Xie, J.J. Williams, and N. Chawla, Scr. Mater. 66, 586 (2012).10.1016/j.scriptamat.2012.01.009 ↗
14. K.S. Kim, C.H. Yu, and J.M. Yang, Thin Solid Films 462–463, 402 (2004).10.1016/j.tsf.2004.05.064 ↗
15. D.S. Liu, C.Y. Huo, C.L. Hsu, G.S. Shen, Y.R. Chen, and K.C. Lo, Mater. Sci. Eng. A 494, 196 (2008).10.1016/j.msea.2008.04.015 ↗
16. D.G. Kim, J.W. Kim, and S.B. Jung, Mater. Sci. Eng. B 121, 204 (2005).10.1016/j.mseb.2005.03.033 ↗
17. J. Wang and H. Nishikawa, Microelectron. Reliab. 54, 1583 (2014).10.1016/j.microrel.2014.03.007 ↗
18. J.W. Kim and S.B. Jung, Mater. Sci. Eng. A 371, 267 (2004).10.1016/j.msea.2003.12.012 ↗
19. J.W. Kim and S.B. Jung, Mater. Sci. Eng. A 397, 145 (2005).10.1016/j.msea.2005.02.040 ↗
20. B.Y. Wu, H.W. Zhong, Y.C. Chan, and M.O. Alam, J. Mater. Res. 21, 2224 (2006).10.1557/jmr.2006.0296 ↗
21. H.T. Lee, M.H. Chen, and H.M. Jao, Mater. Sci. Eng. A 358, 134 (2003).10.1016/S0921-5093(03)00277-6 ↗
22. X. Hu, W. Chen, X. Yu, Y. Li, Y. Liu, and Z. Min, J. Alloy. Compd. 600, 13 (2014).10.1016/j.jallcom.2014.02.039 ↗
23. Y.H. Tian, C.J. Hang, C.Q. Wang, S.H. Yang, and P.R. Lin, Mater. Sci. Eng. A 529, 468 (2011).10.1016/j.msea.2011.09.063 ↗
24. J.W. Yoon and S.B. Jung, Mater. Sci. Eng. A 452–453, 46 (2007).10.1016/j.msea.2006.10.163 ↗
25. J.W. Yoon, S.W. Kim, and S.B. Jung, J. Alloy. Compd. 391, 82 (2005).10.1016/j.jallcom.2004.09.001 ↗
26. Z. Huang, P. Kumar, I. Dutta, J.H.L. Pang, R. Sidhu, M. Renavikar, and R. Rahajan, J. Electron. Mater. 41, 375 (2012).10.1007/s11664-011-1769-8 ↗
27. S.S. Ha, J.K. Jang, S.O. Ha, J.W. Kim, J.W. Yoon, B.W. Kim, S.K. Park, and S.B. Jung, J. Electron. Mater. 38, 2489 (2009).10.1007/s11664-009-0916-y ↗
28. C.Y. Yu, W.Y. Chen, and J.G. Duh, J. Alloy. Compd. 586, 633 (2014).10.1016/j.jallcom.2013.10.113 ↗