Development of a Novel Polishing Pad with a Phyllotactic Pattern, and Experimental Studies
Source abstract
Abstract
In this paper we discuss the development of a novel polishing pad, and polishing experiments on wafers. The phyllotaxis theory of biology was used to position tin alloy blocks which contained fine diamond abrasive grains on the pad surface. The effects of phyllotactic pattern properties were simulated, and are discussed in detail. Prototype pads were fabricated by use of screen-printing technology. The polishing performance of the pad was tested on wafers. Significant improvements were achieved for polished wafer surface roughness, and its nonconformity was reduced from 3 μm to 1 μm. The suggested range of the diameter of the tin alloy block and the phyllotactic coefficient were from 1.9 mm to 2.1 mm and from 2.0 to 2.2, respectively. These improvements can be attributed to the phyllotactic distribution of the tin alloy blocks, which resulted in favorable contact pressure and temperature distributions, slurry flow, and removal of waste between the polishing pad and the workpiece.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Adhesion, Friction, and Surface Interactions · Force Microscopy Techniques and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. J.Y. Choi and H.D. Jeong, Int. J. Mach. Tools Manuf. 44, 1163 (2004).10.1016/j.ijmachtools.2004.04.006 ↗
2. D. Rosales-Yeomans, H. Lee, T. Suzuki, and A. Philipossian, Thin Solid Films 520, 6 (2012).10.1016/j.tsf.2011.08.029 ↗
3. Y.C. Wang and T.S. Yang, J. Eng. Math. 63, 33 (2009).10.1007/s10665-008-9240-4 ↗
4. Y.C. Chiou, R.T. Lee, and C.L. Yau, Int. J. Mach. Tools Manuf. 47, 361 (2007).10.1016/j.ijmachtools.2006.03.003 ↗
5. E.S. Lee, S.E. Hwang, J.T. Lee, and J.K. Won, Int. J. Precis. Eng. Manuf. 10, 25 (2009).10.1007/s12541-009-0043-y ↗
6. D.B. James, U.S. patent 6069080, 30 May 2000.
7. H.Y. Kim, J. Electron. Soc. 151, 858 (2004).10.1149/1.1813951 ↗
8. D. Rosales-Yeomans, D. DeNardis, L. Borucki, and A. Philipossian, J. Electrochem. Soc. 151, 10 (2008).
9. S. Douady and Y. Couder, J. Theor. Biol. 178, 255 (1992).10.1006/jtbi.1996.0024 ↗
10. H. Vogel, Math. Biosci. 44, 179 (1979).10.1016/0025-5564(79)90080-4 ↗
11. F.R. Yeatts, Math. Biosci. 187, 205 (2004).10.1016/j.mbs.2003.09.002 ↗
12. R. Durairaj, L.W. Man, N.N. Ekere, and S. Mallik, Mater. Des. 31, 1056 (2010).10.1016/j.matdes.2009.09.051 ↗
13. D. Schwanke, T. Haas, and C. Zeilmann, 14th European Microelectronics and Packaging Conference & Exhibition Friedrichshafen, Germany, Vol. 23 (2003).
14. P.S. Chao, J.T. Huang, H.J. Hsu, and S.H. Shih, Microelectron. Eng. 84, 60 (2007).10.1016/j.mee.2006.08.005 ↗
15. J.T. Huang, P.S. Chao, H.J. Hsu, and S.H. Shih, Mater. Sci. Semicond. Process. 10, 133 (2007).10.1016/j.mssp.2007.07.001 ↗
16. F.W. Preston, J. Soc. Glass Technol. 11, 214 (1927).
17. Y.S. Lv, M. Duan, J. Wang, N. Li, T. Zhang, and X.L. Xing, Diam. Abras. Eng. 30, 13 (2010).
18. Y.G. Wang, L.C. Zhang, and A. Biddut, Wear 270, 312 (2011).10.1016/j.wear.2010.11.006 ↗
19. G.H. Fu and A. Chandra, J. Electron. Mater. 31, 166 (2002).
20. J.P. Dempsey, Z.G. Zhao, and H. Li, Int. J. Solids Struct. 27, 73 (1991).10.1016/0020-7683(91)90146-7 ↗
21. Y.Y. Lin and S.P. Lo, Int. J. Adv. Manuf. Technol. 22, 401 (2003).10.1007/s00170-003-1544-y ↗
22. S.P. Lo, Y.Y. Lin, and J.C. Huang, Int. J. Adv. Manuf. Technol. 34, 547 (2007).10.1007/s00170-006-0622-3 ↗
23. H. Yasui and Y. Suzuki, J. Jpn. Soc. Precis. Eng. 63, 404 (1997).10.2493/jjspe.63.404 ↗