Three-dimensional simulation of microstructure evolution in damascene interconnects: Effect of overburden thickness
Source abstract
Abstract
Microstructure in the damascene interconnects evolves with the overburden layer, an excessive metal layer over trenches. We present the results of three-dimensional simulation, which show the effects of overburden thickness on microstructure evolution in a trench. When the thickness of the overburden is less than half of the trench depth, for a trench with the aspect ratio of unity, the microstructure in the trench tends to evolve into a bamboo structure. This effect is discussed in terms of grain sizes in the trench and those in the overburden. The thinner overburden layer would have smaller grains, of which growth is limited by its thickness. Such small-sized grains in the overburden are not likely to grow into the trench, which hardly make grain boundaries in the trench. Meanwhile, the grains from the trench are able to continue growth inside the trench, resulting in a bamboo structure. Overburden thickness affects the reliability and the electrical performance of the damascene copper interconnects. Optimization of overburden thickness is required to minimize these effects.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Copper Interconnects and Reliability · Electronic Packaging and Soldering Technologies · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. D. Edelstein, J. Heidenreich, R. Goldblatt, W. Cote, C. Uzoh, N. Lustig, P. Roper, T. McDevitt, W. Motsiff, A. Simon, J. Dukovic, R. Wachnik, H. Rathore, R. Schulz, L. Su, S. Luce, and J. Slattery, Tech. Dig. IEEE Int. Electron Devices Meeting 1997, p. 773 (1997).
2. D.C. Edelstein, Proc. Soc. Photo-Opt. Inst. 3508, 8 (1998).
3. T.J. Licata, E.G. Colgan, J.M.E. Harper, and S.E. Luce, IBM J. Res. Development 39, 419 (1995).10.1147/rd.394.0419 ↗
4. T.N. Theis, IBM J. Res. Development 44, 379 (2000).10.1147/rd.443.0379 ↗
5. J.D. Plummer, M. Deal, and P.B. Griffin, Silicon VLSI Technology: Fundamentals, Practice and Modeling (Upper Saddle River, NJ: Prentice-Hall, 2000), pp. 779–780.
6. A.F. Mayadas and M. Schatzkes, Phys. Rev. B 1, 1382 (1970).10.1103/PhysRevB.1.1382 ↗
7. J. Cho and C.V. Thompson, Appl. Phys. Lett. 54, 25 (1989).
8. J. Cho and C.V. Thompson, J. Electron. Mater. 19, 1207 (1990).10.1007/BF02673334 ↗
9. Y.-C. Joo and C.V. Thompson, J. Appl. Phys. 76, 11 (1994).
10. C. Ryu, K.-W. Kwon, A.L.S. Loke, H. Lee, T. Nogami, V.M. Dubin, R.A. Kavari, G.W. Ray, and S.S. Wong, IEEE Trans. Electron. Dev. 46, 1113 (1999).10.1109/16.766872 ↗
11. C.V. Thompson and J.R. Lloyd, Mater. Res. Soc. Bull. 17, 19 (1993).10.1557/S088376940003904X ↗
12. R. Rosenberg, D.C. Edelstein, C.K. Hu, and K.P. Rodbell, Ann. Rev. Mater. Sci. 30, 229 (2000).10.1146/annurev.matsci.30.1.229 ↗
13. C.S. Hau-Riege and C.V. Thompson, Appl. Phys. Lett. 78, 3451 (2001).10.1063/1.1355304 ↗
14. H.J. Frost, C.V. Thompson, and D.T. Walton, Acta Metall. 40, 779 (1992).10.1016/0956-7151(92)90020-F ↗
15. B.D. Knowlton, J.J. Clement, and C.V. Thompson, J. Appl. Phys. 81, 6073 (1997).10.1063/1.364446 ↗
16. W. Fayad, C.V. Thompson, and H.J. Frost, Scripta Mater. 40, 1199 (1999).10.1016/S1359-6462(99)00034-2 ↗
17. Y.-J. Park, V.K. Andleigh, and C.V. Thompson, J. Appl. Phys. 85, 3546 (1999).10.1063/1.369714 ↗
18. P.R. Besser, J.E. Sanchez, Jr. and D. Field, Advanced Metallization for ULSI Applications (Warrendale, PA: Materials Research Society, 1997), pp. 89–95.
19. P. Bruschi, C. Ciofi, V. Dattilo, A. Diligenti, A. Nannini, and B. Neri, J. Electron. Mater. 26, L17 (1997)10.1007/s11664-997-0283-5 ↗
20. L. Vanasupa, Y.-C. Joo, P.R. Besser, and S. Pramanick, J. Appl. Phys. 85, 2583 (1999).10.1063/1.369624 ↗
21. C.H. Seah, S. Mridha, and L.H. Chan, J. Vac. Sci. Technol. A 17, 1963 (1999).10.1116/1.581711 ↗
22. C.K. Hu, K.Y. Lee, L. Gignac, and R. Carruthers, Thin Solid Films 308–309, 443 (1997).
23. C.-K. Hu, R. Rosenberg, and K.Y. Lee, Appl. Phys. Lett. 74, 2945 (1999).10.1063/1.123974 ↗
24. L. Arnaud, G. Tartavel, T. Berger, D. Mariolle, Y. Gobil, and I. Touet, Microelectron. Reliab. 40, 77 (2000).10.1016/S0026-2714(99)00209-7 ↗
25. C. Lingk and M.E. Gross, J. Appl. Phys. 84, 5547 (1998).10.1063/1.368856 ↗
26. P.R. Besser, E. Zschech, W. Blum, D. Winter, R. Ortega, S. Rose, M. Herrick, M. Gall, S. Thrasher, M. Tiner, B. Baker, G. Braeckelmann, L. Zhao, C. Simpson, C. Capasso, H. Kawasaki, and E. Weitzman, J. Electron. Mater. 30, 320 (2001).10.1007/s11664-001-0038-7 ↗
27. W.W. Mullins, Acta Metall. 6, 414 (1958).10.1016/0001-6160(58)90020-8 ↗
28. M.P. Anderson, G.S. Grest, and D.J. Srolovitz, Phil. Mag. B 59, 293 (1989).10.1080/13642818908220181 ↗
29. G.S. Grest, M.P. Anderson, D.J. Srolovitz, and A.D. Rollett, Scripta Metall. Mater. 24, 661 (1990).10.1016/0956-716X(90)90219-7 ↗
30. D.J. Srolovitz, G.S. Grest, and M.P. Anderson, Acta Metall. 33, 2233 (1985).10.1016/0001-6160(85)90185-3 ↗
31. J. Sanchez, Jr. and P.R. Besser, Proc. IEEE 1998 Int. Interconnect Technology Conf. (Picataway, NJ: IEEE, 1998), pp. 247–249.
32. F.J. Humphreys and M. Hatherly, Recrystallization and Related Annealing Phenomena (Elsevier Science Ltd., Oxford, U.K.), p. 289 (1995).
33. C.V. Thompson, Ann. Rev. Mater. Sci. 20, 245 (1990).10.1146/annurev.ms.20.080190.001333 ↗