Microstructure, creep properties, and failure mechanism of SnAgCu solder joints
Source abstract
Abstract
The effect of microstructure on the creep properties and the failure mechanism of SnAgCu solder joints was studied. Single overlap shear specimens made of FR-4 printed circuit boards (PCBs) with organic solderability preservative (OSP), NiAu, and immersion Sn surface finish were reflow-soldered with hypoeutectic, eutectic, and hypereutectic SnAgCu solder paste. Creep tests of the solder joints were performed at 85°C and 105°C under constant load. The effect of microstructure on the creep behavior of the joints was studied by examining the fracture surfaces and cross-sectional samples of the tested joints. Results show that the intermetallic compound at the interface between the PCB and solder affects the fracture behavior of SnAgCu solder joints, thus creating a significant difference in the creep properties of solder joints on different surface finishes. Composition of SnAgCu solder was also found to affect the creep properties of the joints.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. C.A. Harper, Electronic Materials and Processes Handbook, 3rd ed. (New York: McGraw-Hill, 2003), p. 588.
2. Y. Fukuda, M.G. Pecht, K. Fukuda, and S. Fukuda, IEEE Trans. Compon. Packag. A 26, 616 (2003).10.1109/TCAPT.2003.817658 ↗
3. J.S. Hwang, Environment-Friendly Electronics: Lead-Free Technology (Bristol: Electrochemical Publications, 2001), p. 366.
4. J. Yu, D.K. Joo, and S.W. Shin, Acta Mater., 50, 4315 (2002).10.1016/S1359-6454(02)00263-X ↗
5. F. Guo, J. Lee, and K.N. Subramanian, Solder Surf. Mount Technol. 15, 39 (2003).10.1108/09540910310455716 ↗
6. H.G. Song, J.W. Morris, and F. Hua, Mater. Trans. 43, 1847 (2002).10.2320/matertrans.43.1847 ↗
7. J. McDougall, S. Choi, T.R. Bieler, K.N. Subramanian, and J.P. Lucas, Mater. Sci. Eng., A 285, 25 (2000).10.1016/S0921-5093(00)00661-4 ↗
8. J.J. Sundelin, S.T. Nurmi, T.K. Lepistö, and E.O. Ristolainen, Solder Surf. Mount Technol. 17, 3 (2005).10.1108/09540910510630377 ↗
9. T. Hiramori, M. Ito, Y. Tanii, A. Hirose, and K.F. Kobayashi, Mater. Trans. 44, 2375 (2003).10.2320/matertrans.44.2375 ↗
10. P.-L. Wu, M.-K. Huang, C. Lee, and S.-R. Tzan, Mater. Chem. Phys. 87, 285 (2004).10.1016/j.matchemphys.2004.05.044 ↗
11. K.Y. Lee, M. Li, D.R. Olsen, W.T. Chen, B.T.C. Tan, and S. Mhaisalkar, 2001 IEEE ECTC 51, 478 (2001).
12. J.-W. Yoon, S.-W. Kim, and S.-B. Jung, J. Alloys Compd. 391, 82 (2005).10.1016/j.jallcom.2004.09.001 ↗
13. M. Amagai, M. Watanabe, M. Omiya, K. Kishimoto, and T. Shibuya, Microelectron. Reliab. 42, 951 (2002).10.1016/S0026-2714(02)00017-3 ↗
14. H.-T. Lee, M.-H. Chen, H.-M. Jao, and T.-L. Liao, Mater. Sci. Eng., A 358, 134 (2003).10.1016/S0921-5093(03)00277-6 ↗
15. C.-B. Lee, I.-Y. Lee, S.-B. Jung, and C.-C. Shur, Mater. Trans. 43, 751 (2002).10.2320/matertrans.43.751 ↗
16. J.J. Sundelin, S.T. Nurmi, T.K. Lepistö and E.O. Ristolainen, Mater. Sci. Eng., A420, 55 (2006).10.1016/j.msea.2006.01.065 ↗
17. D. Hull, Fractography: Observing, Measuring and Interpreting Fracture Surface Topography (Cambridge, England: Cambridge University Press, 1999), p. 366.