Modeling the Electrical Conduction in Epoxy–BaTiO3 Nanocomposites
Source abstract
Abstract
Epoxy–BaTiO3 nanocomposites are widely used as the dielectric material in embedded planar capacitors. To maximize the effective dielectric constant of this nanocomposite, the loading of BaTiO3 is kept as high as possible, but at high loadings of BaTiO3 the magnitude of undesirable leakage current in the dielectric also increases. This paper investigates the conduction mechanism in epoxy–BaTiO3 nanocomposites. Further, the effects of BaTiO3 loading and the size of BaTiO3 particles on the electrical conduction are investigated and also modeled. To investigate the conduction mechanism, capacitor structures (Cu/dielectric/Cu) with nanocomposite dielectric were fabricated using the colloidal process. The loading and size of BaTiO3 particles were varied in the nanocomposite dielectric. Once the capacitor structures were fabricated, the leakage current was measured across the capacitor dielectric as a function of temperature and voltage. The leakage current data were checked for any consistency with the standard conduction models using regression analysis, and the dominant conduction mechanism was identified. Finally, the activation energy of the dominant conduction mechanism was trended as a function of BaTiO3 loading and particle size both experimentally and theoretically.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dielectric materials and actuators · Advanced Sensor and Energy Harvesting Materials · High voltage insulation and dielectric phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. M. Alam, M. Azarian, and M. Pecht, J. Electron. Mater. 41, 2286 (2012).10.1007/s11664-012-2044-3 ↗
2. J. Xu, S. Bhattacharya, P. Pramanik, and C. Wong, J. Electron. Mater. 35, 2009 (2006).10.1007/s11664-006-0307-6 ↗
3. P. Muthana, A. Engin, M. Swaminathan, R. Tummala, V. Sundaram, B. Wiedenman, D. Amey, K. Dietz, and S. Banerji, IEEE Trans. Adv. Packag. 30, 809 (2007).10.1109/TADVP.2007.901548 ↗
4. M. Alam, M.H. Azarian, M. Osterman, and M. Pecht, Circuit World 36, 22 (2010).10.1108/03056121011015068 ↗
5. A. Madou and L. Martens, IEEE Trans. Electromagn. Compat. 43, 549 (2001).10.1109/15.974634 ↗
6. M. Alam, M.H. Azarian, M. Osterman, M. Pecht, and J. Intel, Mater. Syst. Struct. 22, 1293 (2011).10.1177/1045389X11416024 ↗
7. M. Alam. M. Azarian, and M. Pecht, IEEE Trans. Device Mater. Res. (2011). DOI: 10.1109/TDMR.2011.2168527 .10.1109/TDMR.2011.2168527 ↗
8. M. Alam, M. Azarian, and M. Pecht, J. Mater. Sci. (2012). DOI: 10.1007/s10854-011-0618-0 .10.1007/s10854-011-0618-0 ↗
9. S. Wada, T. Hoshina, H. Yasuno, M. Nam, H. Kakemoto, and T. Tsurumi, J. Korean Phys. Soc. 46, 303 (2005).
10. D. Yoon, J. Zhang, and B. Lee, Mater. Res. Bull. 38, 765 (2003).10.1016/S0025-5408(03)00075-8 ↗
11. K. Jang and K. Paik, J. Appl. Polym. Sci. 110, 798 (2008).10.1002/app.28515 ↗
12. Y. Rao, J. Qu, T. Marinis, and C. Wong, IEEE Trans. Compon. Packag. Technol. 23, 680 (2000).10.1109/6144.888853 ↗
13. J. Xu, S. Bhattacharya, K. Moon, J. Lu, B. Englert, and C. Wong, Proceedings of the 56th Electronic Components & Technology Conference (Piscataway, NJ: IEEE, 2006), p. 1520.
14. N. Jayasundere and B. Smith, J. Appl. Phys. 73, 2462 (1993).10.1063/1.354057 ↗
15. S. Cho and K. Paik, Proceedings of the 51st Electronic Components & Technology Conference (Piscataway, NJ: IEEE, 2001), p. 1418.
16. H. Lee, K. Lee, J. Schunke, and L. Burton, IEEE Trans. Compon. Hybrids Manuf. 7, 443 (1984).10.1109/TCHMT.1984.1136375 ↗
17. I. Yoo, L. Burton, and F. Stephenson, IEEE Trans. Compon. Hybrids Manuf. 10, 274 (1987).10.1109/TCHMT.1987.1134731 ↗
18. R. Bartnikas and R. Eichhorn, Engineering Dielectrics- Volume II A, ASTM Special Technical Publication 783 (Philadelphia, PA: ASTM, 1983).
19. N. Andonovska, S. Rendevski, and S. Prendzov, Bull. Chem. Technol. Macedonia 21, 17 (2002).
20. J. Robertson and B. Varlow, Proceedings of Conference on Electrical Insulation and Dielectric Phenomenon (Piscataway, NJ: IEEE, 2003), p. 79.
21. M. Alam, M.H. Azarian, M. Osterman, and M. Pecht, Microelectron. Reliab. 51, 946 (2011).10.1016/j.microrel.2011.01.002 ↗
22. S. Liang, S. Chong, and E. Giannelis, Proceedings of the 48th Electronic Components and Technology Conference (Piscataway, NJ: IEEE, 1998), p. 171.
23. S. Ogitani, S. Allen, and P. Kohl, IEEE Trans. Adv. Packag. 23, 313 (2000).10.1109/6040.846650 ↗
24. V. Agrawal, P. Chahal, R. Tummala, and M. Allen, Proceedings of the 48th Electronic Components and Technology Conference (Piscataway, NJ: IEEE, 1998), p. 165.
25. L. Fan, Y. Rao, C. Tison, K. Moon, S. Pothukuchi, and C. Wong, Proceedings of the 52nd Electronic Components and Technology Conference (Piscataway, NJ: IEEE, 2002), p. 936.
26. H. Windlass, P. Raj, D. Balaraman, S. Bhattacharya, and R. Tummala, IEEE Trans. Electron. Packag. Manuf. 26, 100 (2003).10.1109/TEPM.2003.817719 ↗
27. K. Jang and K. Paik, Proceedings of the 56th Electronic Components and Technology Conference (Piscataway, NJ: IEEE, 2006), p. 1504.
28. S. Cho, J. Lee, and K. Paik, Adv. Electron. Mater. Packag. (Piscataway, NJ: IEEE, 2001), p. 63.
29. A. Sihvola, Electromagnetic Mixing Formulas and Applications, IEE Electromagnetic Wave Series (London: Institution of Engineering and Technology, 1999).10.1049/PBEW047E ↗
30. J. Stratton, Electromagnetic Theory (New York: McGraw-Hill, 1941).
31. T. Zakri, J. Laurent, and M. Vauclin, J. Phys. D Appl. Phys. 31, 1589 (1998).10.1088/0022-3727/31/13/013 ↗
32. H. Vladimir and L. Karel, WSEAS Trans. Electron. 4, 181 (2007).