journal article·2005-01

Multiaxial low-cycle fatigue of 63Sn-37Pb solder

X. Chen, D. Jin, M. Sakane, T. Yamamoto

Journal of Electronic Materials· Volume 34· Issue 1
Publisher page

Abstract

A series of low-cycle fatigue experiments of tubular specimens under uniaxial, torsional, and proportional multiaxial loading was performed on 63Sn-37Pb solder. Several criteria of multiaxial low-cycle fatigue life were evaluated based on the fatigue life data of 63Sn-37Pb solder. It was shown that the maximum normal strain approach gives life prediction on the unconservative side, but the maximum shear strain approach presents quite good predictions. The Lee-Kim-Nam (LKN) parameter gave an acceptable prediction, but the prediction for uniaxial fatigue life was on the conservative side. The shear-based critical plane parameters, Kandil-Brown-Miller (KBM) parameter and Chen-Xu-Huang (CXH) parameter, presented good predictions of multiaxial fatigue life.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Electronic Packaging and Soldering Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. H.D. Solomon, Electronic Packaging: Materials and Processes (Metals Park, OH: ASM, 1985), pp. 29–47.
2. H.D. Solomon, J. Electron. Packaging Trans. ASME, 111, 75 (1989).10.1115/1.3226525 ↗
3. H.D. Solomon, ASME, Trans. J. Electron. Packaging 112, 123 (1990).10.1115/1.2904352 ↗
4. H.D. Solomon, in The Mechanics of Solder Alloy Interconnects, eds. D.R. Frear, S.N. Burchett, H.S. Morgan, and J.H. Lau (New York: Van Nostrand Reinhold, 1994), pp. 199–313.
5. S. Vaynman, M.E. Fine, and D.A. Jeannotte, in Solder Mechanics—a State of the Art Assessment, ed. D.R. Frear, W.B. Jones, and K.R. Kinsman (Warrendale, PA: TMS, 1990), pp. 155–189.
6. X.Q. Shi, H.L.J. Pang, W. Zhou, and Z.P. Wang, Int. J. Fatigue 22, 217 (2000).10.1016/S0142-1123(99)00124-3 ↗
7. C. Kanchanomai, Y. Miyashita, and Y. Mutoh, Int. J. Fatigue 24, 671 (2002).10.1016/S0142-1123(01)00186-4 ↗
8. C. Kanchanomai, Y. Miyashita, and Y. Mutoh, Int. J. Fatigue 24, 987 (2002).10.1016/S0142-1123(02)00011-7 ↗
9. X.J. Yang, C.L. Chow, and K.J. Lau, Int. J. Fatigue 25, 533 (2003).10.1016/S0142-1123(02)00150-0 ↗
10. H.L.J. Pang, K.H. Tan, X.Q. Shi, and Z.P. Wang, Mater. Sci. Eng. A307, 42 (2001).10.1016/S0921-5093(00)01958-4 ↗
11. J.H. Lau, Thermal Stress and Strain in Microelectronics Packaging (New York: Van-Nostrand Reinhold, 1993).10.1007/978-1-4684-7767-2 ↗
12. P.J. Bonacuse and S. Kalluri, Elevated Temperature Axial and Torsional Fatigue Behavior of Haynes188, NASA TM 105396, 1 (1992).
13. S.Y. Zamrik, M. Mirdamadi, D.C. Davis, Advance in Multiaxial Fatigue, ASTM STP 1191, 85 (1993).10.1520/STP24797S ↗
14. F. Ellyin, Mech. Res. Commun. 1, 219 (1974).10.1016/0093-6413(74)90068-8 ↗
15. M.W. Brown and K.J. Miller, Proc. Inst. Mech. Eng. 187, 745 (1973).10.1243/PIME_PROC_1973_187_161_02 ↗
16. D. Socie, ASME J. Eng. Mater. Technol. 109, 293 (1987).10.1115/1.3225980 ↗
17. F.A. Kandil, M.W. Brown, and K.J. Miller, Biaxial Low-Cycle Fatigue Fracture of 316 Stainless Steel at Elevated Temperatures, Book 280 (London: The Metals Society, 1982), pp. 203–210.
18. B.L. Lee, K.S. Kim, and K.M. Nam, Int. J. Fatigue 25, 621 (2003).10.1016/S0142-1123(02)00169-X ↗
19. X. Chen, S.Y. Xu, and D.X. Huang, Fatigue Fract. Eng. Mater. Struct. 22, 679 (1999).10.1046/j.1460-2695.1999.t01-1-00199.x ↗