Electromigration studies of flip chip Sn95/Sb5 solder bumps on Cr/Cr-Cu/Cu under-bump metallization
Source abstract
Abstract
The electromigration-induced failure of Sn95/Sb5 flip chip solder bumps was investigated. The failure of the joints was found at the cathode/chip side after current stressing with a density of 1×104 A/cm2 at 150°C for 13 sec. The growth of intermetallic compounds (IMCs) was observed at the anode side after current stressing. Voids were found near the current crowding area in the cathode/chip side, and the (Cu,Ni)6Sn5 IMC at the cathode/chip end was transformed into the Sn phase. The failure mechanism for Sn95/Sb5 flip chip solder joint is proposed in this paper.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Semiconductor materials and interfaces · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. J.D. Wu, P.J. Zheng, Kelly Lee, C.T. Chiu, and J.J. Lee, 2002 Electronic Components and Technology Conf., p. 452.
2. W.J. Choi, E.C.C. Yeh, and K.N. Tu, 2002 Electronic Components and Technology Conf., p.1201.
3. Se-Young Jang, Wolf J., Woon-Seong Kwon, and Kyung-Wook Paik, 2002 Electronic Components and Technology Conf., p. 1213.10.1109/ECTC.2002.1008261 ↗
4. T.Y. Lee, K.N. Tu, and D.R. Frear, J. Appl. Phys. 90, 4502 (2001).10.1063/1.1400096 ↗
5. T.Y. Lee, K.N. Tu, S.M. Kuo, and D.R. Frear, J. Appl. Phys. 89, 3189 (2001).10.1063/1.1342023 ↗
6. A. Christou, Electromigration & Electronic Device Degradation (New York: John Wiley & Sons, Inc., 1994).
7. J.P. Dekker, P. Gumbsch, E. Arzt, and A. Lodder, Phys. Rev. B 59, 11 (1999).10.1103/PhysRevB.59.7451 ↗
8. Q.T. Huynh, C.Y. Liu, Chih Chen, and K.N. Tu, J. Appl. Phys. 89, 4332 (2001).10.1063/1.1357459 ↗
9. 2001 International Technology Roadmap for Semiconducors, Assembly and Package, p. 3.
10. D.R. Lide, Handbook of Chemistry and Physics, 2nd ed. (Boca Raton, FL: CRC Press, 1992).
11. R.J. Fields, S.R. Low III, and G.K. Lucey, Met. Sci. Joining 165 (1992).
12. R.J.K. Wassink, Soldering in Electronics, 2nd ed. (Ayr, Scotland: Electrochemical Publication Ltd., 1989).
13. C.Y. Liu, C. Chen, C.N. Liao, and K.N. Tu, Appl. Phys. Lett. 75, 58 (1999).10.1063/1.124276 ↗
14. S. Brandenburg and S. Yeh, Proc. Surface Mount Int. Conf. Exhib. (Edina, MN: SMTA, 1998), p. 337.