journal article·2015-10

Effect of Electromigration on the Type of Drop Failure of Sn–3.0Ag–0.5Cu Solder Joints in PBGA Packages

M. L. Huang, N. Zhao

Journal of Electronic Materials· Volume 44· Issue 10
Publisher page

Abstract

Board-level drop tests of plastic ball grid array (PBGA) packages were performed in accordance with the Joint Electron Devices Engineering Council standard to investigate the effect of electromigration (EM) on the drop reliability of Sn–3.0Ag–0.5Cu solder joints with two substrate surface finishes, organic solderability preservative (OSP) and electroless nickel electroless palladium immersion gold (ENEPIG). In the as-soldered state, drop failures occurred at the substrate sides only, with cracks propagating within the interfacial intermetallic compound (IMC) layer for OSP solder joints and along the IMC/Ni–P interface for ENEPIG solder joints. The drop lifetime of OSP solder joints was approximately twice that of ENEPIG joints. EM had an important effect on crack formation and drop lifetime of the PBGA solder joints. ENEPIG solder joints performed better in drop reliability tests after EM, that is, the drop lifetime of ENEPIG joints decreased by 43% whereas that of OSP solder joints decreased by 91%, compared with the as-soldered cases. The more serious polarity effect, i.e., excessive growth of the interfacial IMC at the anode, was responsible for the sharper decrease in drop lifetime. The different types of drop failure of PBGA solder joints before and after EM, including the position of initiation and the propagation path of cracks, are discussed on the basis of the growth behavior of interfacial IMC.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. K.N. Tu, J. Appl. Phys. 94, 5451 (2003).10.1063/1.1611263 ↗
2. M.L. Huang, S. Ye, and N. Zhao, J. Mater. Res. 26, 3009 (2011).10.1557/jmr.2011.373 ↗
3. M.L. Huang, Q. Zhou, N. Zhao, and Z.J. Zhang, J. Electron. Mater. 42, 2975 (2013).10.1007/s11664-013-2690-0 ↗
4. C.C. Yeh, W.J. Choi, and K.N. Tu, Appl. Phys. Lett. 80, 580 (2002).10.1063/1.1432443 ↗
5. Y.H. Lin, Y.C. Hu, C.M. Tsai, C.R. Kao, and K.N. Tu, Acta Mater. 53, 2029 (2005).10.1016/j.actamat.2005.01.014 ↗
6. H. Gan and K.N. Tu, J. Appl. Phys. 97, 063514 (2005).10.1063/1.1861151 ↗
7. Y.D. Lu, X.Q. He, Y.F. En, X. Wang, and Z.Q. Zhuang, Acta Mater. 57, 2560 (2009).10.1016/j.actamat.2009.02.015 ↗
8. W.H. Wu, H.L. Chung, C.N. Chen, and C.E. Ho, J. Electron. Mater. 38, 2563 (2009).10.1007/s11664-009-0876-2 ↗
9. X.F. Zhang, J.D. Guo, and J.K. Shang, J. Mater. Res. 23, 3370 (2008).10.1557/JMR.2008.0413 ↗
10. M.L. Huang, Z.J. Zhang, N. Zhao, and Q. Zhou, Scripta Mater. 68, 853 (2013).10.1016/j.scriptamat.2013.02.007 ↗
11. M.L. Huang, Q. Zhou, N. Zhao, X.Y. Liu, and Z.J. Zhang, J. Mater. Sci. 49, 1755 (2014).10.1007/s10853-013-7862-z ↗
12. D.A. Shnawah, S.B.M. Said, M.F.M. Sabri, I.A. Badruddin, and F.X. Che, J. Electron. Mater. 41, 2631 (2012).10.1007/s11664-012-2145-z ↗
13. D.A. Shnawah, M.F.M. Sabri, and I.A. Badruddin, Microelectron. Reliab. 52, 90 (2012).10.1016/j.microrel.2011.07.093 ↗
14. D.A. Shnawah, M.F.M. Sabri, I.A. Badruddin, S.B.M. Said, T. Ariga, and F.X. Che, J. Electron. Mater. 42, 470 (2013).10.1007/s11664-012-2343-8 ↗
15. Y.S. Lai, P.F. Yang, and C.L. Yeh, Microelectron. Reliab. 46, 645 (2006).10.1016/j.microrel.2005.07.005 ↗
16. D.Y.R. Chong, F.X. Che, J.H.L. Pang, K. Ng, J.Y.N. Tan, and P.T.H. Low, Microelectron. Reliab. 46, 1160 (2006).10.1016/j.microrel.2005.10.011 ↗
17. W.H. Zhu, L.H. Xu, J.H.L. Pang, X.R. Zhang, E. Poh, Y.F. Sun, A.Y.S. Sun, C.K. Wang, and H.B. Tan, Proceedings of the 58th Electronic Components and Technology Conference, (2008), pp. 1667–1672.
18. JEDEC Standard JESD22-B111, Board Level Drop Test Method of Components for Handheld Electronic Products (2003).
19. M.L. Huang, L.D. Chen, S.M. Zhou, and S. Ye, Proceedings of 2011 International Symposium on Advanced Packaging Materials, (2011), pp. 297–301.10.1109/ISAPM.2011.6105720 ↗
20. K.J. Zeng, R. Stierman, T.C. Chiu, D. Edwards, K. Ano, and K.N. Tu, J. Appl. Phys. 97, 024508 (2005).10.1063/1.1839637 ↗