Influence of B2O3 Addition on the Properties of TiO2 Thick Film at Various Annealing Temperatures for Hydrogen Sensing
Source abstract
Abstract
To increase the adhesion of thick film on a substrate, boron oxide (B2O3) was added to titanium dioxide (TiO2), and the change in the morphology, crystallinity and band gap of TiO2 thick film was investigated. TiO2 and TiO2-B2O3 pastes were prepared and deposited on the microscopic glass using screen-printing technique and then annealed under air at different temperatures of 400°C, 450°C and 500°C for 30 min. The morphology, elemental composition, structure and absorption of the thick films were characterized using FESEM, EDX, XRD and UV–visible spectroscopy. The TiO2 and TiO2-B2O3 thick films were fabricated as gas sensors and exposed to 100–1000 ppm of hydrogen at an operating temperature of 300°C. The results revealed that the addition of B2O3 increased the crystallinity of anatase phases and rutile phases in TiO2 as annealing temperature increased. The TiO2-B2O3(T500) gas sensor exhibited the highest response to various concentrations of hydrogen (100–1000 ppm) at an operating temperature of 300°C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Analytical Chemistry and Sensors · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. S. Valencia, J.M. Marín, and G. Restrepo, Open Mater. Sci. J. 4, 9 (2010).10.2174/1874088X01004020009 ↗
2. Z. Rui, S. Wu, C. Peng, and H. Ji, Chem. Eng. J. 243, 254 (2014).10.1016/j.cej.2014.01.010 ↗
3. Z. Li, Z. Yao, A.A. Haidry, T. Plecenik, B. Grancic, T. Roch, M. Gregor, and A. Plecenik, J. Alloys Compd. 806, 1052 (2019).10.1016/j.jallcom.2019.07.301 ↗
4. A.M. Ruiz, G. Sakai, A. Cornet, K. Shimanoe, J.R. Morante, and N. Yamazoe, Sens. Actuat. B Chem. 93, 509 (2003).10.1016/S0925-4005(03)00183-7 ↗
5. K. Hsu, T. Fang, Y. Hsiao, and P. Wu, J. Alloys Compd. 794, 576 (2019).10.1016/j.jallcom.2019.04.238 ↗
6. B. Karunagaran, P. Uthirakumar, S.J. Chung, S. Velumani, and E.-K. Suh, Mater. Charact. 58, 680 (2007).10.1016/j.matchar.2006.11.007 ↗
7. M.H. Seo, M. Yuasa, T. Kida, J.S. Huh, N. Yamazoe, and K. Shimanoe, Procedia Chem. 1, 192 (2009).10.1016/j.proche.2009.07.048 ↗
8. T. Hubert, L. Boon-Brett, G. Black, and U. Banach, Sens. Actuat. B Chem. 157, 329 (2011).10.1016/j.snb.2011.04.070 ↗
9. S.A.M. Chachuli, M.N. Hamidon, M.S. Mamat, M. Ertugrul, and N.H. Abdullah, Sensors 18, 2483 (2018).10.3390/s18082483 ↗
10. X. Peng, Z. Wang, P. Huang, X. Chen, X. Fu, and W. Dai, Sensors 16, 1249 (2016).10.3390/s16081249 ↗
11. S. Amaniah, M. Chachuli, M. Nizar, and S. Mamat, Mater. Sci. Semicond. Process. 99, 140 (2019).10.1016/j.mssp.2019.04.009 ↗
12. S.D. Bakrania and M.S. Wooldridge, Sensors 9, 6853 (2009).10.3390/s90906853 ↗
13. D.N. Suryawanshi, D.R. Patil, and L.A. Patil, Sens. Actuat. B Chem. 134, 579 (2008).10.1016/j.snb.2008.05.045 ↗
14. W. Saidi, N. Hfaidh, M. Rasheed, M. Girtan, A. Megriche, and M. El Maaoui, RSC Adv. 6, 68819 (2016).10.1039/C6RA15060H ↗
15. C.R. Kurkjian and W.R. Prindle, J. Am. Ceram. Soc. 81, 795 (2005).10.1111/j.1151-2916.1998.tb02415.x ↗
16. S. C. Akkuş, A. Öztürk, and V. Kalem, in 18th International Metallurgy & Materials Congress (2016), pp. 40–43.
17. K. Kirdsiri, N. Srisittipokakun, Y. Ruangtaweep, K. Boonin, P. Limsuwan, and J. Kaewkhao, Adv. Mater. Res. 770, 72 (2013).10.4028/www.scientific.net/AMR.770.72 ↗
18. X. Lu, B. Tian, F. Chen, and J. Zhang, Thin Solid Films 519, 111 (2010).10.1016/j.tsf.2010.07.071 ↗
19. H. Tian, L. Hu, C. Zhang, S. Chen, J. Sheng, L. Mo, and W. Liu, J. Mater. Chem. 21, 863 (2011).10.1039/C0JM02941F ↗
20. S.J. Patil, A.V. Patil, and C.G. Dighavkar, Front. Mater. Sci. 9, 14 (2015).10.1007/s11706-015-0279-7 ↗
21. M. Ehsani, M.N. Hamidon, S. Member, A. Toudeshki, M.H.S. Abadi, and S. Rezaeian, IEEE Sens. J. 16, 6839 (2016).10.1109/JSEN.2016.2587779 ↗
22. M. H. S. Abadi, M. N. Hamidon, A. H. Shaari, N. Abdullah, R. Wagiran, and N. Misron, in 2010 IEEE International Conference on Semiconductor Electronics (2010), pp. 88–91.
23. B.D. Cullity, Elements of X-ray Diffraction (Boston: Addison-Wesley, 1956).
24. Y. Bessekhouad, D. Robert, and J.V. Weber, J. Photochem. Photobiol. A Chem. 157, 47 (2003).10.1016/S1010-6030(03)00077-7 ↗
25. K. Zakrzewska and M. Radecka, Nanoscale Res. Lett. 12, 1 (2017).10.1186/s11671-017-1875-5 ↗
26. M. Scarsella, M.P. Bracciale, B. De Caprariis, P. De Filippis, A. Petrullo, L. Pronti, and M.L. Santarelli, Chem. Eng. Trans. 60, 133 (2017).
27. P. Malliga, J. Pandiarajan, N. Prithivikumaran, and K. Neyvasagam, in International Conference on Advanced Nanomaterials & Emerging Engineering Technologies (2013), pp. 488–491.
28. G. Wang, L. Xu, J. Zhang, T. Yin, and D. Han, Int. J. Photoenergy (2012). https://doi.org/10.1155/2012/265760.10.1155/2012/265760 ↗
29. Y. Shi, R. Zhang, H. Zheng, D. Li, W. Wei, X. Chen, Y. Sun, Y. Wei, H. Lu, N. Dai, and L. Chen, Nanoscale Res. Lett. 12, 1 (2017).10.1186/s11671-016-1773-2 ↗
30. Y. Mizukoshi, N. Ohtsu, S. Semboshi, and N. Masahashi, Appl. Catal. B Environ. 91, 152 (2009).10.1016/j.apcatb.2009.05.018 ↗
31. E. Grabowska, A. Zaleska, J.W. Sobczak, M. Gazda, and J. Hupka, Procedia Chem. 1, 1553 (2009).10.1016/j.proche.2009.11.003 ↗
32. D.L. Domtau, J. Simiyu, E.O. Ayieta, B. Muthoka, and J.M. Mwabora, J. Mater. Phys. Chem. (2016). https://doi.org/10.12691/jmpc-4-1-1.10.12691/jmpc-4-1-1 ↗
33. C.-H. Wei and C.-M. Chang, Mater. Trans. 52, 554 (2011).10.2320/matertrans.M2010358 ↗
34. J. Tauc, R. Grigorovici, and A. Vancu, Basic Solid State Phys. 15, 627 (1966).10.1002/pssb.19660150224 ↗
35. Z. Li, Z. Yao, A. Ali, and T. Plecenik, Int. J. Hydrog. Energy 43, 21114 (2018).10.1016/j.ijhydene.2018.09.051 ↗
36. D.E. Williams, Sens. Actuat. B Chem. 57, 1 (1999).10.1016/S0925-4005(99)00133-1 ↗